• Journal of Integrative Natural Science
• /
• v.6 no.1
• /
• pp.34-38
• /
• 2013

Tributyltin hydride ($n-Bu_3SnH$), an endocrine disruptor, was slowly polymerized by the group 4 ${Cp^{\prime}}_2TiCl_2/N$-selectride (Cp' = $C_5H_5$, Cp; $Me-C_5H_4$, Me-Cp; $Me_5C_5$, $Cp^*$) catalyst combination to give two phases of products: one is an insoluble cross-linked solid, polystannane in 3-25% yield as minor product via disproportionation/dehydrocoupling combination process, and the other is an oil, hexabutyldistannane in 65-90% yield as major product via simple dehydrocoupling process. Disproportionation/dehydrocoupling process first produced a low-molecular-weight oligostannane possessing partial backbone Sn-H bonds which then underwent an extensive cross-linking reaction of backbone Sn-H bonds, resulting in the formation of an insoluble polystannane. The disproportionation/dehydrocoupling of a tertiary hydrostannane mediated by early transition metallocene/inorganic hydride is quite unusual and applicable.

• Journal of Power System Engineering
• /
• v.22 no.6
• /
• pp.51-57
• /
• 2018

In Korea, the Air Quality Conservation Act and the Petroleum and Petroleum Substitute Fuel Business Act stipulate certain quality standards for fuels distributed in Korea, thereby striving to reduce vehicle performance and emissions. Domestic petroleum products import and produce all the crude oil from each oil refiner so that the quality of the petroleum product is different according to the characteristics of the crude oil. As a result, vehicles have been improved by using the physical properties calculated through the physical property measurement that has tried to improve the accuracy of the measurement of the energy consumption efficiency of the automobile by using standard fuel from abroad. In this study, the same test procedure and method as the test method of domestic gasoline vehicle emission are applied using four samples of gasoline and the latest gasoline vehicle which are actually distributed, and the performance evaluation is performed. The purpose of this study is to contribute to improvement of vehicle technology and fuel quality by collecting necessary basic data and obtaining data on the effect of differences in gasoline property on vehicle emissions. The results of the test showed that the emission of gases (NMOG, CO) from gasoline vehicles was the most influenced by the sulfur content, unlike the previous studies that the vehicles emission had the greatest influence on the distillation characteristics and the specific gravity of aromatic compounds. The catalytic reaction such as the poisoning action of the three-way catalyst which is the abatement device was interfered and the emission was increased. The distillation characteristics and specific gravity of aromatic compounds were found to affect the emission of vehicles. According to the physical properties of the fuel, the emission difference was 28.0% in the urban mode and 17.6 % in the highway mode.

• Korean Journal of Chemical Engineering
• /
• v.35 no.11
• /
• pp.2172-2184
• /
• 2018

The production of isophthalic acid (IPA) from the oxidation of m-xylene (MX) by air is catalyzed by $H_3PW_{12}O_{40}$ (HPW) loaded on carbon and cobalt. We used $H_2O_2$ solution to oxidize the carbon to improve the catalytic activity of HPW@C catalyst. Experiments reveal that the best carbon sample is obtained by calcining the carbon at $700^{\circ}C$ for 4 h after being impregnated in the 3.75% $H_2O_2$ solution at $40^{\circ}C$ for 7 h. The surface characterization displays that the $H_2O_2$ modification leads to an increase in the acidic groups and a reduction in the basic groups on the carbon surface. The catalytic capability of the HPW@C catalyst depends on its surface chemical characteristics and physical property. The acidic groups play a more important part than the physical property. The MX conversion after 180 min reaction acquired by the HPW@C catalysts prepared from the activated carbon modified in the best condition is 3.81% over that obtained by the HPW@C catalysts prepared from the original carbon. The IPA produced by the former is 46.2% over that produced by the latter.

• Journal of Powder Materials
• /
• v.29 no.3
• /
• pp.207-212
• /
• 2022

Nanosized rutile titanium dioxide (TiO₂) is used in inorganic pigments and cosmetics because of its high whiteness and duality. The high quality of the white pigments depends on their surface coating technique via the solgel process. SiO₂ coatings are required to improve the dispersibility, UV-blocking, and whiteness of TiO₂. Tetraethyl orthosilicate (TEOS) is an important coating precursor owing to its ability to control various thicknesses and densities. In addition, we use Na₂SiO₃ (sodium silicate) as a precursor because of its low cost. Compared to TEOS, which controls the pH using a basic catalyst, Na₂SiO₃ controls the pH using an acid catalyst, giving a uniform coating. The coating thickness of TiO₂ is controlled using a surface modifier, cetrimonium bromide, which is used in various applications. The shape and thickness of the nanosized coating layer on TiO₂ are analyzed using transmission electron microscopy, and the SiO₂ nanoparticle behavior in terms of the before-and-after size distribution is measured using a particle size analyzer. The color measurements of the SiO₂ pigment are performed using UV-visible spectroscopy.

• Korean Journal of Materials Research
• /
• v.20 no.9
• /
• pp.472-477
• /
• 2010

$Al_2O_3$ has received wide attention with established use as a catalyst and growing application in structural or functional ceramic materials. On the other hand, the boehmite (AlO(OH)) obtained by sol-gel process has exhibited a decrease in surface area during phase transformation due to a decline in surface active site at high temperature. In this work, $Al_2O_3$-CuO/ZnO (ACZ) and $Al_2O_3$-CuO/CeO (ACC) composite materials were synthesized with aluminum isopropoxide, copper (II) nitrate hemi (pentahydrate), and cerium (III) nitrate hexahydrate or zinc (II) nitrate hexahydrate. Moreover, the Span 80 as the template block copolymer was added to the ACZ/ACC composition to make nano size particles and to keep increasing the surface area. The ACZ/ACC synthesized powders were characterized by Thermogravimetry-Differential Thermal analysis (TG/DTA), X-ray Diffractometer (XRD), Field-Emmision Scanning Electron Microscope (FE-SEM), Bruner-Emmett-Teller (BET) surface analysis and thermal electrical conductivity (ZEM-2:M8/L). An enhancement of surface area with the addition to Span 80 surfactant was observed in the ACZ powders from 105 $m^2$/g to 142 $m^2$/g, and the ACC powders from 103 $m^2$/g to 140 $m^2$/g, respectively.

• Korean Chemical Engineering Research
• /
• v.50 no.5
• /
• pp.772-777
• /
• 2012

Factors acting on the deactivation of $V_2O_5/TiO_2$ catalysts were investigated in the selective catalytic reduction(SCR) process for long term operation. The activity of $V_2O_5/TiO_2$ catalysts was decreased rapidly after 8 months from the starting of operation in the selective catalytic reaction processes. From ICP-AES analysis, the deactivation of the used catalysts could be caused from the calcium component included in urea solution as a reducing agent. It was found from the $NH_3$-TPD experiments that the strong basic element like Ca component drastically affected the acidity of the $V_2O_5/TiO_2$ catalyst. The results gave an explanation on the reason why the component of Ca, even though its concentration is very low, could lead to the deactivation of $V_2O_5/TiO_2$ catalyst in the selective catalytic reaction processes.

• Korean Chemical Engineering Research
• /
• v.51 no.2
• /
• pp.279-284
• /
• 2013

The phenolic beads in macrosize range were obtained by suspension polymerization at $98^{\circ}C$ from phenol and formaldehyde in the presence of basic catalyst with a phenol to formaldehyde (P/F) range of 1:1~1:4, and they were carbonized to spherical carbon beads under nitrogen at $700^{\circ}C$. Thermal analysis on spherical phenolic beads obtained by suspension polymerization showed that the postcuring process is essential. In order to optimize the suspension polymerization, the effects of the P/F molar ratio, the pH of catalyst, and the molecular weight of stabilizer on the size distribution and yield of spherical phenol beads were examined separatively. The particle size was increased whereas the yield was decreased with P/F molar ratio. The increasing basicity of catalyst made the particle size to increase, while the molecular weight of stabilizer had more effect on the yield rather than on the particle size distribution. The thermal stability of the spherical phenolic beads obtained through postcure was also examined by TGA. The phenol beads of high P/F ratio still showed the weight loss at $220^{\circ}C$ even after postcure due to the high possibility of dibenzyl ether, while those of low P/F ratio showed the steady decrease in weight during $220^{\circ}C$ to $400^{\circ}C$, which showed that the optimal P/F ratio was 1:2.

• Clean Technology
• /
• v.23 no.1
• /
• pp.104-112
• /
• 2017

Hydrogen production via steam reforming of liquefaction liquid from marine algae over hydrothermal liquefaction was carried out at 873 ~ 1073 K with a commercial catalyst and Ni based $K_2Ti_xO_y$ added catalysts. Liquefaction liquid obtained by hydrothermal liquefaction (503 K, 2 h) was used as a reactant and comparison studies for catalytic activity over different catalysts (FCR-4-02, $Ni/K_2Ti_xO_y-Al_2O_3$, $Ni/K_2Ti_xO_y-SiO_2$, $Ni/K_2Ti_xO_y-ZrO_2/CeO_2$ and Ni/$K_2Ti_xO_y$-MgO), reaction temperature were performed. Experimental results showed Ni/$K_2Ti_xO_y$ based catalysts ($Ni/K_2Ti_xO_y-Al_2O_3$, $Ni/K_2Ti_xO_y-SiO_2$, Ni/$K_2Ti_xO_y-ZrO_2$/ $CeO_2$ and Ni/$K_2Ti_xO_y$-MgO) have a higher activity than commercial catalyst (FCR-4-02) and In particular, a product composition was different depending on support materials. An acidic support ($Al_2O_3$) and a basic support (MgO) led to a higher selectivity for CO while a neutral support ($SiO_2$) and a reducing support ($ZrO_2/CeO_2$) resulted in a higher $CO_2$ selectivity due to water gas shift reaction.

• Applied Chemistry for Engineering
• /
• v.20 no.6
• /
• pp.653-657
• /
• 2009

Nitrous oxide is a typical greenhouse gas which is produced from various organic or fossil fuel combustion processes as well as chemicals producing plants. $N_2O$ has a global worming potential of 310 times that of $CO_2$ on per molecule basis, and also acts as an ozone depleting material in the stratosphere. However, its removal is not easy for its chemical stability characteristics. Most SCR processes with several effective reducing agents generally require the operation temperature higher than $450^{\circ}C$, and the catalytic conversion becomes decreased significantly when NOx is present in the stream. Present experiments have been performed to obtain basic design data of actual application concerning the effects of $SO_2$ and $NH_3$ on the interim and long term activities of $N_2O$ reduction with CO over the mixed metal oxide (MMO) catalyst derived from a hydrotalcite-like compound precursor. The MMO catalysts used in the experiments, have shown prominent activities displaying full conversions of $N_2O$ near $200^{\circ}C$ when CO is introduced. The presence of $SO_2$ is considered to show no critical behavior as can be met in the $NH_3$ SCR DeNOx systems and the effect of $NH_3$ is considered to play as mere an impurity to share the active sites of the catalysts.

• Korean Chemical Engineering Research
• /
• v.43 no.1
• /
• pp.1-8
• /
• 2005

In this study, $TiO_2$ powders were prepared by hydro-thermal synthesis with titanium tetra isopropoxide. The prepared $TiO_2$ and the commercial $TiO_2$(P-25, Degussa) were by impregnating $H_2PtCl_6$ solution or the leached solution from the waste catalytic converter of automobile. Modified photocatalysts were analyzed by ICP-AES, UV-DRS, XRD, SEM. And band-gap energy of modified photo-catalyst was found to decreased to 1.76eV and basic structure was changed upon modification by leached solution. Modified photocatalysts were coated on the wallpaper after using mixed solution with adhesive materials(PVC). And then to know the modified photo catalysts tested the reactivity and quantum efficiency in the mixed gas with NO as reactants in the photo catalytic reactor. In the gas phase, photo-catalytic activity of NO was the highest for modified P-25 catalysts(P-25(w)) that P-25(w) was impregnated by leached solution of wasted catalytic converter.