• Journal of the Korean Institute of Gas
• /
• v.9 no.3 s.28
• /
• pp.15-20
• /
• 2005

Recently, Environmental and Safety Management is approaching in order to reduce the loss cost of accidents in effect, efficiency, excellency. In the side that is a large production enemy of the industrialization times, Most companies are focused on decreasing the loss that can let their companies grow healthily than a productivity improvement. The this study analyzed a matter asked f3r basic requirements and continuous development of ISO14001, OHSAS18001, PSM, Responsible Care operating in petro-chemical industries basically, and developed a LCMCI(the Loss Control Management system for Continuous Improvement of the Petro-chemical Industries) fer continuous development of petro-chemical companies in order to be able to continuously manage a loss.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.2
• /
• pp.49-57
• /
• 2012

The reduction of greenhouse gas emission currently becomes more urgent task for Korean Industries, especially for the paper industries because of the new regulation based on the low carbon-green growth law. In order to reduce effectively the greenhouse gas emission, the development of greenhouse gas emission inventory has been widely considered as one of the basic processes and has been applied to many industries. In this study, the fundamental schemes and the cases of greenhouse gas inventories were investigated. Especially, the major considering units for paper industries were suggested to develope greenhouse emission inventory of paper industry.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.2
• /
• pp.85-91
• /
• 2012

Offshore Bridge Crane and Hoist which are used FPSO Ships that can move through self - power and have oil production, store and loading and unloading facilities are increasing demand. These equipments must use Crane safely by pitch and rolling of the high wave. For this, they have to be equipped with high durability and safety. So the advanced shipbuilding industries use a private design system which can be prompt in design and analyze in the first stage. For this study, It was developed a basic design system for "Bridge Crane and Hoist" used on FPSO ships. By developing this automated system for "Bridge Crane and Hoist" design, we will be able to make the design data easy to understand. This basic design system will help reduce the amount of working time it takes to design new systems, construct design databases and get approval for the finished design.

• Journal of Korean Public Health Nursing
• /
• v.12 no.2
• /
• pp.12-26
• /
• 1998

The occupational health problems are the major issue in the modern industrial society. Especially the small scale industries have many hazardous factors and not any occupational health programs in itself. Fortunately. the government-funded subsidiary program was developed and carried out in the past six years in our country. The purposes of this study were to find out the actual condition of the occupational health personnel's accomplishments for the government-funded subsidiary program for small scale industries and to provide basic data for setting up more developed subsidiary occupational health program. Data were collected through 6 kinds of service records review. These service records were written by 3 occupational health personnels were attached to the one subject center of KIHA. were undertaken during March to December, 1997. at 95 small scale industries which were applied the government-funded subsidiary occupational health program. Results were as follows 1. Concerning 95 small scale industries showed characteristics of a typical small scale industry. 2. A doctor visited in industries total 190 times per year, average 19 industries per month, twice per year and industry. A hygienist visited in industries total 378 times per year, average 38 industries per month, four times per year and industry. A nurse visited in industries total 477 times per year. average 47 industries per month, 5 times per year and industry. 3. 3 occupational health personnels accomplished total 3,869 items. A doctor accomplished total 539 items per year, each time 3 items In an industry. A hygienist accomplished total 1.581 items per year, each time 4 items in an industry. A nurse accomplished total 1.749 items per year, each time 4 items in an industry. 4. The major contents of doctor's accomplishment were 'health consultation for suspicious worker with general & occupational disease', 'a check of the workplace & special health education', 'guidance of special medical examination in the second half of year', etc. The major contents of hygienist's accomplishment were 'pretest & guidance of planning for evaluation of working environment'. 'evaluation for ventilating facilities & suporting self inspection', 'guidance of MSDS recording & chemicals management', etc. The major contents of nurse's accamplishment were 'health counseling of general & special medical examination results'. 'health education of preventing occupational disease & health disorder'. 'guidance of subsidiary program planning', 'selecting & guidance of health monitor', etc. It was concluded that the occupaional health personnels implemented the subsidiary program according to the order of health management guide. The current health management guide of subsidiary occupational health program in which the fixed contents, visiting number & periods is not desirable. That guide is left the characteristics of small scale industries out of consideration. It is suggested that occupational health management guide should be developed according to the general & environmental characteristics of each small scale industry, and on the other hand, the more specific guide for each occupational health personnel should be developed.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2006.05a
• /
• pp.357-363
• /
• 2006

• Journal of the Economic Geographical Society of Korea
• /
• v.25 no.3
• /
• pp.299-319
• /
• 2022

Since 2010, there have been phenomena that the recession of key industries has spreaded into a regional crisis, affecting the overall regional economy in Korea. The purpose of this study is to analyze how the regional industrial structure and manufacturing competitiveness has been changed in Gunsan, which is in crisis due to the decline of the shipbuilding and automobile industries. As a result, the pace of change in industrial structure of Gunsan has accelerated, and this is because the mass employment released from the key industries has been absorbed into other industries, but there were no manufacturing fields that could replace the recession of the key industries. Among the manufacturing of Gunsan, the degree of specialization of the basic industries has been gradually weakened, and in addtion, the weakening of location competitiveness has brought a negative impact on the growth rate differential of the manufacturing. It is necessary to closely examine changes in characteristics of regional industrial structure for Gusan to find an alternative direction in order to respond to the manufacturing crisis.

• World Technopolis Review
• /
• v.4 no.2
• /
• pp.79-86
• /
• 2015

Over the last two decades, interest increased with regard to how some research universities made direct impacts on surrounding regional economic activities and growth. Although the role of basic research for most research universities has remained strong, pressure has intensified to broaden its missions to include helping local and regional economic development efforts. Consequently, many research universities have evolved their basic scientific research mission from the production of scientific knowledge to the sharing and exchange of knowledge with local industries by actively engaging in local economic development (Uyarra 2010). Previous examination has shown that most research universities contribute to local and regional economic development by various functions they provide. They are as follows: Creation of Knowledge, Human-capital creation, Transfer of existing know-how, Technological innovation, Capital investment, Regional leadership, Knowledge infrastructure production and Influence in regional milieu (Drucker and Goldstein 2007). This paper will review the existing literature on the role of universities and its impacts on local regional economic growth and development. In addition, this paper will show how two major research universities (The University of Arizona and Arizona State University) have contributed to the growth of Arizona during last two decades. It is believed that the existence of these two research universities have been instrumental in making industries more diverse and highly attractive, particularly in the Phoenix Metropolitan Area.

• KIEAE Journal
• /
• v.10 no.2
• /
• pp.3-8
• /
• 2010

Many countermeasures are presented to make excessive earth circumstance pollution better in the earth. A lot of researches are in progress to lessen $CO_2$ among the industries exhausting it. The industries manufacturing cement are making many countermeasures. Many concernments on ECO-friendly materials, rather than cement, are increased, and researches are in progress to develop them. Lime, material mostly used before Portland cement appeared, attracts the Occident as well as the Orient. In the Occident, lime mortar was used in common, for maintaining and repairing cultural properties, too. This study is aimed at offering basic materials for the modern use of lime, ECO-friendly material. This study measured the change of intensity and weight with lime, sand, and earth, basic materials of Samhoimool. As a result, at the beginning, hydrated lime displayed its density late, but as time was gone, density was promoted continuously. In addition, density was promoted, when it was given heat at the beginning. If heat-generation reaction of quicklime and water was used, density was promoted at the beginning, but liquidity showed a drop.

• Journal of Ocean Engineering and Technology
• /
• v.24 no.4
• /
• pp.53-58
• /
• 2010

Offshore floater such as FPSO, drillship is composed of topside and hull side, and the interface structure is called topside module support. In this study, practical considerations were investigated for the design of topside module supports, from the concept design stage to the final stage of structural determination, in view of design efficiency and construction productivity. The effects of welding design factors of topside module support, such as welding throat thickness, sectional welding area, and welding man-hours, were compared and analyzed closely with respect to productivity. The current status and problems regarding the application of deep or full penetration welding are discussed, and a direct-calculation method is suggested as a possible solution to these problems.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.6
• /
• pp.37-44
• /
• 2013

Friction stir welding (FSW) is a solid state joining technique that has expanded rapidly since its development in 1991 and has numerous applications in a wide variety of industries. This paper introduces the basic principles of friction stir welding (FSW) and presents a survey of the latest technologies and applications in the field. The basic principles that are discussed include the terminology, tool/workpiece processes, FSW merits and process variants. In particular, the process variants including the rotation speed and traveling speed are discussed, which include the defect-free zone in an oxygen free copper and Al alloy, respectively. Multiple aspects of the FSW machine are developed, including a horizontal 2D FSW machine and a hybrid complex FSW machine. The latest applications are introduced, with an emphasis on the recent advances in the aerospace, automotive, and IT display industries. Finally, the direction for future research and potential applications are examined.