• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.1
• /
• pp.9-16
• /
• 1994

In this paper, we propose a frequency assignment algorithm to minimize intermodulation effect which is caused by nonlinear amplipification of the satellite transponder. Allmost all of the published algorithms up to now are applicable to one-level SCPC systems, the application range of those algorithms is very restricted from the viewpoint of actual practice. In this paper, we develope and propose a new frequency assignment algorithm which utilize the basic concept of Okinaka's DELINS-INSDEL algorithm to extend its applicabilty from one-level SCPC systems to multi-level systems. The proposed TDTI algorithm provides considerable generality in reducing intermodulation effect in practical satellite communication systems because of its alpplicability to multi-level and multi-bandwidth systems as well as one-level systems. Besides the TDTI algorithm which shows excellent characteristics in performance but requires somewhat long excution time. the WTDI-SDELINS algorithm is proposed in this paper to compensate TDTI's demerits in excution time. Considering the fact that there are very little published sterategies for multi-level and muti-bandwidth systems. the algorithm proposed in this paper is quite meaningful.

• The Research Journal of the Costume Culture
• /
• v.5 no.1
• /
• pp.57-69
• /
• 1997

The environment and the ecologic balance of the earth had been destructed by both man and ecological catastrophes and are no longer sustainable. We have no future unless we conserve our natural resourses and make efforts to change our basic patterns of consuming, production and recycling. Our earth had been contaminated without our recognition. We became indifferent to environmental problems and even more we hve lost our interest completely. To overcome this period of crisis, the concept of 'green imperative'has emerged. Since design powerfully influences our lives and the environment for good or ill, those at the forefront of design to consumers and the end-users can contribute to the well-being of the people and planet through new awareness of environmental and ecological based design. The spiritual awareness of green design will enrich the work of design through lasting performance of continuty and will make the future work.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.11a
• /
• pp.47-53
• /
• 2006

The oxidizer-rich preburner is applied to the high efficiency closed cycle rocket propulsion system. This system is generally operated on oxidizer-fuel mixture ratio over than 50. The spray quality and mixing performance are very important for safe combustion of this preburner. This paper presents basic concept and spray characteristic of the preburner injector.

• Computational Structural Engineering
• /
• v.8 no.1
• /
• pp.147-160
• /
• 1995

Based on the weighted residual concept[4], a three-dimensional plate theory is derived using a Fourier series expansion of a dependent variable and a weighted residual approximation of the basic elasticity equations. The weighted residual equilibrium equations of the plate are expressed in terms of weighted displaced quantities, and the results are then interpreted by means of a potential energy functional. The potential energy expression is used to develop a finite element implementation. For illustrative purposes, the application of the theory to a strip plate is considered and two numerical examples of a cantilever and a simply-supported strip plate are studied.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.1085-1088
• /
• 2001

The process of styrofoam pattern that has been used for material of press die pattern depends chiefly on handwork. Laser manufacturing system developed to increase precision and efficiency of process that is also able to convert the design easily. Applying the RP(rapid prototyping) concept reversely, the unnecessary part of section is vapored away by heat source of laser beam after converting 3-D CAD model into cross-sectional shape information. Laser beam is line-scanned in plane specimens to measure the depth and width of cut, surface roughness, cross-sectional shape as converting laser power, scanning speed, cutting gas pressure. With these basic data, plane surface, inclined surface, hole, outer contour trimming process is experimented and optimum condition are obtained. In plane and inclined surface experiments, 15W laser power and 50mm/s scanning speed make superior processing property and 30W, 10mm/s make processing efficiency increase in trimming process. With these results, simple patterns were manufactured and the possibility of applying laser manufacturing system to styrofoam pattern was convinced.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.582-585
• /
• 2001

Requirements for device networks differ greatly from those of data(business) networks. Consequently, any control network technology which uses a fieldbus protocol is, in general, different from IP network protocol TCP/IP. One needs to integrate fieldbus protocol and TCP/IP to realize distributed control over IP network or internet. This paper suggests a basic concept that can be applied to distributed control over IP network or internet. Specifically, LonWorks technology that uses LonTalk protocol is reviewed as device network. LonWorks technology provides networked intelligent I/O and controllers which make it a powerful, expandable solution. It is also addressed that many hardwired PLCs can be replaced by LonWorks devices. Connecting these remote LonWorks networks to the Internet can provide a powerful, integrated, distributed control system.

• The Korean Journal of Ecology
• /
• v.20 no.3
• /
• pp.201-216
• /
• 1997

Forest managers are increasingly being challenged to produce goods and services to society while managing for ecosystem sustainability. Forest ecosystem management is an emerging philosophy to achieve these objectives. We synthesized some basic concepts of forest ecosystem, sustainability in forests and forest ecosystem management, and described the importances of long-term ecological studies. Also we presented few relatively simple principles of forest ecosystem management, strategies, and case studies for integrating forest ecosystem management principles into the forest management planning process. It was emphasizd that in forest ecosystem management process, society, land managers, forest managers, and scientists be entered into a partnership to reshape management goals, redefine objectives, and redirect management actions in response to changing socioeconomic information and evolving bioogical, physical, chemical, and environmental conditions. Agreement or disagreement with our synthesis and opinions on forest ecosystem management is out of the primary objective of this paper, which is to stimulate new and creative approaches to forest ecosystem management as an emerging issue in forestry.

• Journal of Radiation Protection and Research
• /
• v.29 no.1
• /
• pp.49-55
• /
• 2004

This paper presents the mechanical and thermal stress analysis of a disposal canister to provide basic information for dimensioning the canister and configuration of the canister components. The structural stress analysis is carried out using a finite element analysis code, NISA, and focused on the structural strength of the canister against the expected external pressures due to the swelling of the bentonite buffer and the hydrostatic head, and the thermal load build up in the container.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.04a
• /
• pp.387-392
• /
• 1999

The bond performance of prestressing strands is still not well understood and is still in controversy on the validity of the test results up to today, although it is a basic information to desing the prestressed pretensioned concrete beams. Different transfer length has been found for a product of the same company, but of the different production methods and factories in the United States. It is necessary to determine optimum transfer bond length of the domestic stands because the ultimate flexural and shear capacity in a section of prestressed concrete beams are evaluated under the assumption that the anchorage bond failure shall not happen. The transfer lenght of low-relaxation, Gr 270, and 1/2" seven-wire prestressing strands from four domestic companies will be evaluated by the concrete strain method. The recent concept of the 95% Maximum Average Strain Method suggested by Russel et al. will be considered to obtain the transfer length of domestic strands. It will be also evaluated if the domestic strands are conform to ACI 318-95.8-95.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05a
• /
• pp.238-241
• /
• 2006

The needs for strengthening and rehabilitation of the concrete bridges are a growing concern in many countries and has been emphasized in various researches and papers. Traditional external post-tensioning method using either steel bars or tendons is commonly used as a strengthening method. However, the method has some disadvantages such as stress concentration at the anchorages. Multi-stepwise thermal prestressing method is a newly proposed method for strengthening and rehabilitation of concrete girder bridges. Founded on a simple concept of thermal expansion and contraction of steel, the method is a hybrid method of external post-tensioning and steel plate bonding, combining the merits of two methods. In this paper, basic concepts on strengthening and rehabilitation of concrete girder are presented and an illustrative experiment is introduced.