• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2004년도 대한지구물리학회.한국지구물리탐사학회 공동학술대회 초록집
• /
• pp.165-169
• /
• 2004

Marine magnetic survey were carried out at Sokotra Basin offshore Korea between latitudes $31^{\circ}$ 42'32' N and $32^{\circ}$ 46'29' N, and longitudes $123^{\circ}$ 56'26" E and $125^{\circ}$ 49'16" E in order to estimate the depth of basement complex and as well as to configure it surface and produce the thickness of sedimentary sequence at the study area. Two methods have been used for depth estimation and basement configuration: the power spectrum and the 3-D analytical signal. The estimated depths resulted from the power spectrum method range from 1.4 km to 6.0 km for deep sources (basement troughs), and from 0.3 km to 1.75 km for shallow source (basement peaks). An isopach map was prepared for estimating the thickness of the sedimentary sequence at the study area; it ranges from 1.2 to 4.66 km. The estimated depths resulted from the analytic signal method range from 1.0 to 6 km. A basement configuration map was constructed for the study area in the basin. They show a well agreement with the geology of the study area.

• 대한건축학회논문집:구조계
• /
• 제36권2호
• /
• pp.145-153
• /
• 2020

The purpose of this study is to investigate the effects of composition of underground structural wall and H-pile in soil cement. The results of previous experimental studies are re-analyzed and the nonlinear cross-sectional analyses of composite basement walls are performed to verify their nonlinear flexural behavior. Based on the study, it is explained how the gap deformation between H-Pile and RC wall should be considered in the design of flexure of composite underground walls. The nonlinear cross-sectional analysis shows that the load-displacement curves of composite basement wall specimens exhibiting flexural behavior exist between the results of the analysis of the complete and non-composite cases. When predicting the behavior of the composite basement wall by nonlinear cross-sectional analysis, the flexural behavior of the composite basement wall could be suitably predicted by considering the reduction of the composite ratio due to tensile stress acting on shear connectors.

• Journal of Biosystems Engineering
• /
• 제41권4호
• /
• pp.328-336
• /
• 2016

Purpose: The heat culture areas of greenhouses have been continuously increasing. In the face of international oil price fluctuations, development of energy saving technologies is becoming essential. To save energy, auxiliary heat source and thermal insulation technologies are being developed, but they lack cost-efficiency. The present study was conducted to save energy by developing a conceptually new semi-basement type greenhouse. Methods: A semi-basement type greenhouse, was designed and constructed in the form of a three quarter greenhouse as a basic structure, which is an advantageous structure to inflow sunlight. To evaluate the performance of the developed greenhouse, a similar structured general greenhouse was installed as a control plot, and heating tests were conducted under the same crop growth conditions. Results: Although shadows appeared during the winter in the semi-basement type greenhouse due to the underground drop, the results of crop growth tests indicated that there were no differences in crop growth and development between the semi-basement type greenhouse and the control greenhouse, indicating that the shadows did not affect the crop up to the height of the crop growing point. The amount of fuel used for heating from January to March was almost the same between the two greenhouses for tests. The heating load coefficients of the experimental greenhouses were calculated as $3.1kcal/m^2{\cdot}^{\circ}C{\cdot}h$ for the semi-basement type greenhouse and $2.9kcal/m^2{\cdot}^{\circ}C{\cdot}h$ for the control greenhouse. Since the value is lower than the double layer PE (polyethylene) film greenhouse value of $3.5kcal/m^2{\cdot}^{\circ}C{\cdot}h$ from a previous study, Tthe semi-basement type greenhouse seemed to have energy saving effects. Conclusions: The semi-basement type greenhouse could be operated with the same fuel consumption as general greenhouses, even though its underground portion resulted in a larger volume, indicating positive effects on energy saving and space utilization. It was identified that the heat losses could be reduced by installing a thermal curtain of multi-layered materials for heat insulation inside the greenhouse for the cultivation of horticultural products by installing thermal curtain of multi-layered materials for heat insulation inside the greenhouse, it was identified that the heat losses could be reduced.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1994년도 가을 학술발표회 논문집
• /
• pp.313-318
• /
• 1994

This paper present the application and Structural Behavior of Ultra-High Strength Concrete on Samsung Sin Dae-Bang Housing-Commercial Combined building with 28 story including 8 story basement in seoul. 70 MPa compressive strength has been placed for all 8 basement shear wall. 42 MPa design strength concrete was used for other basement and frame up to 10th floor which us used for commercial purposes

• 한국안전학회지
• /
• 제17권3호
• /
• pp.118-122
• /
• 2002

토압 및 수압을 받는 지하외벽의 거동을 파악하기 위하여 유한요소를 이용한 수치적 연구를 수행하였다. 지하외벽의 구조설계는 판의 경계조건을 가정하여 이루어지는데 이 가정으로 인하여 잘못된 결과를 초래할 수 있다. 본 연구에서는 벽체와 기둥의 강성비와 형상비에 따른 모멘트와 전단력의 변화에 대한 변수해석을 수행하였다. 지하외벽의 설계에 적용할 수 있는 수정계수와 설계에의 적용예를 제시하였다.

• 지구물리
• /
• 제9권4호
• /
• pp.351-359
• /
• 2006

We investigated subsurface structures of the Bransfield Basin, the Antarctic with AUH (Autonomous Underwater Hydrophne) which was designed to record abyssal T-waves generated from submarine earthquakes. The data obtained from a multi-channel seismic survey and an AUH were used for this study. A seismic reflection method was applied to the multi-channel seismic survey data in order to identify bathymetry and sedimentary structures, and the signals recorded in the AUH were used to obtain deep structures as we applied a seismic refraction method. Even though we couldn’t investigate deeper and detailed structure in study area because of lack of Airgun’s capacity, the AUH showed possibilities for being used for a marine seismic survey. From this experiment, we decided the upper and lower sediment layer velocities, detected irregular basement topography probably caused by submarine volcanic/magmatic activities, and retrieved the velocity of the basement and the depth of the sediment layer/basement boundary.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.449-454
• /
• 2003

The accurate mapping of the basement is one of the most crucial factors in construction of harbour facilities and bridges in the coastal areas. In shallow waters, the seismic reflection method often fails to image the basement geometry beneath the sediment cover in many cases. We present the result of a shallow marine seismic refraction survey using two ships, l2-channel hydrophone arrays deployed on the bottom and a borehole sparker or percussion powder as sources. Velocity structure could be computed by tomography algorithm since more than 6 different source points had been applied for one spread. The comparison of the results of the refraction survey with drilling logs demonstrates remarkable consistency in basement geometry. It thus appears that the refraction method in this study is an efficient and cost-effective way to investigate the basement structure in coastal area, river, and lake.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.415-420
• /
• 2003

This Study is performed to analyze the behavior of inverted T-shaped Composite Basement Wall(CBW). For this, it is purposed to analyze the failure mechanisms of inverted T-shaped composite basement wall and propose the method of evaluating strength for design. The failure mechanisms would be devided into 4 type mechanisms from previous experimental results, that is hanger failure, punching shear failure, flexural failure and the buckling of H-pile. A strength evaluation procedure for CBW is induced by analyzing respective failure mechanism. Then, the strength for actual structure consisted of inverted T-shaped composite basement wall was evaluated and the expected failure mechanism was determined.

• 한국건축시공학회지
• /
• 제9권6호
• /
• pp.189-195
• /
• 2009

최근 인구의 도심 집중화 현상이 심화됨에 따라 토지이용의 극대화를 위해 지하공간의 활용이 매우 활발하게 진행되고 있다. 또한 최근 건축물의 지하심도가 깊고 인접건물과 근접시공 되는 경우가 많으므로 건축물의 지하외벽은 슬러리 월 또는 흙막이가시설을 외벽 거푸집으로 사용하고 내측에만 거푸집을 시공하는 방식인 합벽으로 시공되고 있다. 그러나 지하층 합벽 거푸집공사에 대한 원가분석이 건축공사 표준품셈 등에 없는 실정이다. 따라서 본 연구는 지하층 합벽 거푸집 공사의 원가분석을 시행하여 시공단계별 투입원가에 대한 자료를 제공하고자 하였다. 연구결과는 수평목 설치 및 해체는 3%, 거푸집 설치 및 해체는 26%, 보강재 설치 및 해체는 12%, 지지대 설치 및 해체는 42%, 기타 작업은 17% 이다. 정확한 투입원가를 프로세스별 구분하여 정리함으로서 신기술 및 신공법 개발 시 중점을 두어야 하는 포인트를 제시할 것으로 판단된다.

• 암석학회지
• /
• 제14권3호
• /
• pp.141-148
• /
• 2005

연화, 장군 및 울진 Pb-Zn 광상에서 산출되는 납의 근원을 규명하기 위하여 방연석과 황철석 등의 황화광물과 주변의 석회암, 관입암 및 기반암 등에 대해 납 동위원소 분석을 실시하였다. $^{206}Pb/^{204}Pb-^{207}Pb/^{204}Pb$ 그림에서 연화광산의 방연석들은 비교적 잘 정의되는 정(+)의 기울기를 갖는 직선 배열을 보이며, 한반도 선캠브리아 기저지각과 유사한 변화를 보인다. 울진광산의 방연석, 장군석회암 및 주변의 기저암체 역시 연화광산의 변화경향을 따른다. 그러나 연화광산에 비해 $^{206}Pb/^{204}Pb$값이 낮은 장군광산의 광석광물들은 연화광산의 변화경향으로부터 $^{207}Pb/^{204}Pb$ 값이 낮은 쪽으로 벗어난다. 경상분지 내에서 산출되는 중생대 화성암 및 광상들이 한반도의 기저암체들에 비해 훨씬 낮은 $^{207}Pb/^{204}Pb$ 값을 가지는 것을 참조할 때, 장군광산의 광석광물들이 보이는 변화는 기저암체의 오래된 지각물질로부터 용출된 납과 중생대 화성암들이 갖고 있던 보다 맨틀성분이 많이 포함된 납의 혼합을 반영하는 것으로 해석된다. 선캠브리아 기저지각의 변화경향을 비교적 잘 따르는 연화광산과 울진광산의 광석들에 포함된 납은 대부분 오래된 기저암체들로부터 유래한 것으로 보이나, 기저암체의 변화구역의 하단부에 위치하는 것을 고려할 때 중성대 화성암 기원의 납이 일정비율로 포함되었을 가능성을 배제할 수 없다.