• 센서학회지
• /
• 제25권4호
• /
• pp.291-296
• /
• 2016

The ideal chemical sensor must show the similar result under the same condition for accurate measurement of gases regardless of time. However, the actual responses of chemical sensors have been shown the lacks of repeatability and reproducibility because of the drift which has been caused by aging and pollution of the sensor and the environment change such as temperature and humidity. If the problems are not properly taken into considerations, the stability and reliability of the system using chemical sensors would be decreased. In this paper, we analyzed the sensor's drift and applied the three different compensation methods(DWT( Discrete Wavelets Transform), Baseline Manipulation, Internal Normalization) for reducing the effects of the drift in order to improve the stability and the reliability of short term of the chemical sensors. And in order to compare the results of the methods, the standard deviation was used as a criterion. The sensor drift was analyzed by a trend line graph. We applied the three methods to the successive data measured for three days and compared the results. As a result of comparison, the standard deviation of DWT showed lowest value. (Before compensation: 7.1219, DWT: 1.3644, Baseline Manipulation: 2.5209, Internal Normalization: 3.1425).

• Smart Structures and Systems
• /
• 제4권4호
• /
• pp.391-406
• /
• 2008

This study attempts to develop a real-time debonding monitoring system for carbon fiber-reinforced polymer (CFRP) strengthened structures by continuously inspecting the bonding condition between the CFRP layer and the host structure. The uniqueness of this study is in developing a new concept and theoretical framework of nondestructive testing (NDT), in which debonding is detected without relying on previously-obtained baseline data. The proposed reference-free damage diagnosis is achieved based on the concept of time reversal acoustics (TRA). In TRA, an input signal at an excitation point can be reconstructed if the response signal measured at another point is reemitted to the original excitation point after being reversed in the time domain. Examining the deviation of the reconstructed signal from the known initial input signal allows instantaneous identification of damage without requiring a baseline signal representing the undamaged state for comparison. The concept of TRA has been extended to guided wave propagations within the CFRP-strengthened reinforced concrete (RC) beams to improve the detectibility of local debonding. Monotonic and fatigue load tests of large-scale CFRP-strengthened RC beams are conducted to demonstrate the potential of the proposed reference-free debonding monitoring system. Comparisons with an electro-mechanical impedance method and an inferred imaging technique are provided as well.

• 한국측량학회지
• /
• 제31권6_2호
• /
• pp.539-547
• /
• 2013

This research is suggesting the most effective positioning method for GPS based positioning when no GPS reference point is available in the neighborhood. For this purpose, we carried out positioning of the IGS realtime observatories in Australia in various conditions. According to the research, we were certainly assured the one reference point with a short baseline length is more effective for differential positioning than multiple reference points with a long baseline distance beyond 1,000km and suggested the precise point positioning based positioning method can be an excellent substitute when no reference point is available around an unknown point. The research result may be used as the basic data for accurate positioning in poor reference point environments, especially in Antarctica.

• 한국수산과학회지
• /
• 제23권6호
• /
• pp.451-456
• /
• 1990

Underwater acoustic navigation and position fixing systems have been extensively used not only in surface position fixing but also in underwater position fixing. Tn recently, application of these systems has been in the field of underwater inspection of offshore platforms, where it is vital to track the position of an unmanned submersible or diver carrying underwater cameras and nondestructive testing equipment. But these systems are included the fixing errors as results of a signal with additive noise, the attenuation of sound and the interference effects due to multipath reflection and forward scattering. In this paper to improve the position fixing by the supershort baseline acoustic position system, a method to apply the Kalman filter to the fix of the system is proposed and the digital simulation under noise condition is conducted. The optimal positions by the Kalman filter are compared with original positions, and it is confirmed that the results of the pro-posed method are evidently more accurate.

• KIEAE Journal
• /
• 제7권4호
• /
• pp.39-44
• /
• 2007

The purpose of this research is to study security of $CO_2$ exhaust at night in indoor air quality purifying system using plants. For this purpose, two same units for experiment were built, and difference of $CO_2$ exhaust by existence and nonexistence of plantation were measured. To reduce error by entrance of people, automatic measurement system were developed and used. At first, baseline were measured to check standard value, and next, $CO_2$ exhaust by plantation were measured. As a result, in baseline experiment, values of all spaces were steady as 400~500 ppm. When plantation was set-up, value of $CO_2$ at night was measured high as 150 ppm, and maximum value was around 600 ppm. This result is a lot lower than maximum standard of $CO_2$, 1000 ppm.

• 한국전산유체공학회지
• /
• 제14권2호
• /
• pp.25-31
• /
• 2009

Numerical optimization of rotor blade airfoils is performed with a response surface method for helicopter rotor. For the baseline airfoils, OA 312, OA 309, and OA 407 airfoils are selected and optimized to improve aerodynamic performance. Aerodynamic coefficients required for the response surface method are obtained by using Navier-Stokes solver with k-$\omega$ Shear Stress Transport turbulence model. An optimized airfoil has increased drag divergence Mach number. The present design optimization method can generate an optimized airfoil with multiple design constraints, whenever it is designed from different baseline airfoils at the same design condition.

• Journal of Periodontal and Implant Science
• /
• 제28권3호
• /
• pp.523-531
• /
• 1998

The purpose of this investigation was to examine the pattern of progression of periodontitis and the change in the extent and severity of the periodontal condition in young adults. Fourteen subjects with periodontitis, 11 males and 3 females in the age range 22-26, participated in the study. Following a baseline examination, the subjects were monitored for gingival index, probing pocket depth, gingival recession, probing attachment level and radiogrphic crestal bone height for 24 months without therapy. Re-examination were performed after 12 and 24 months. Gingival index, probing pocket depth, gingival recession and probing attachment level were assesed at 6 locations per tooth, and crestal bone height was assessed by subtraction radiography. The results from the follow-up examination revealed that the subjects underwent minor changes with respect to a series of different clinical parameters. The mean values of gingival index was improved, however, the mean values of probing pocket depth, gingival recession, probing attchment level and crestal bone height showed no significant change between baseline and the re-examination after 1 and 2 years.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1993년도 추계학술대회
• /
• pp.141-144
• /
• 1993

This paper propose a two pole phase compensated titer to remove baseline wandering and preserve ST-segment accuracy in real time environment. Bilinear transformed null phase filter(ideal filter), Standard FIR filter and Cubic spline filter are evalauated in the same condition. The proposed phase compensated filter shows better performance than standard filter in real ECG test and triangular pulse test.

• 대한약침학회지
• /
• 제25권1호
• /
• pp.63-67
• /
• 2022

Black soybean (BS) is widely thought to prevent or alleviate hair loss, which has been demonstrated by in vitro experiments. However, few clinical studies have directly assessed the effect of BS on hair growth. To assess the safety and efficacy of BS, we administered BS extract to 10 adult patients for 3 months without any other hair products and treatments. The number and diameter of hair lost from washing were examined every 4 weeks. In addition, the participants' satisfaction with their hair condition was also measured using the VAS (1 to 10) before and after treatment. The mean number of lost hair was 140.7 (SD 59.4) at baseline and 38.8 (SD 54.4) after 12 weeks, and the diameter of lost hair was 72.4 ㎛ (SD 11.9) at baseline and 80.4 ㎛ (SD 8.8) after 12 weeks, which indicated a statistically significant improvement (p = 0.002, p = 0.022, paired t-test). The satisfaction score was significantly increased from 6.10 (SD 1.2) to 8.2 (SD 1.1) after 12 weeks. These results suggest that BS extract may promote hair growth and prevent hair loss.

• 정보과학회 논문지
• /
• 제44권5호
• /
• pp.486-495
• /
• 2017

협업 필터링(CF, Collaborative Filtering)은 추천을 수행하기 위해 필요한 비용(시간/공간 복잡도 등)이 현실 데이터에 적용하기에는 한계가 있다. 평점 빈도 가중치 기반의 Baseline Predictor(RFWBP, Rating Frequency Weight-based Baseline Predictor)는 정확도가 기존의 방법과 근사하며, 비용을 크게 줄일 수 있는 효율적인 방법 중 하나이다. 그러나 효율성을 고려해 RFWBP만 사용할 경우, 1)학습을 수행하지 않기 때문에 발생되는 오차를 감소시킬 수 없고, 2)적합한 추천 목록을 작성하기 위한 조건이 없기 때문에 모두 추천했다. 본 논문은, 제시된 문제를 해결하기 위한 BBP(Bias-Based Predictor)를 제안한다. BBP는 Bias를 보정하여 오차의 범위를 감소시킴으로써 1)을 해결했고, 선호에 적합한 추천 목록 작성을 위한 몇 가지 Case를 정하고, 추천 목록을 구성함으로써 2)를 해결하였다.