• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2004년도 춘계학술발표회논문집
• /
• pp.125-130
• /
• 2004

As an application of GPS is increased by world geodetic system introduction gradually, in this time, It is increased necessary of GPS baseline analysis program development. In this study, I developed a baseline analysis program by L1/L2 carrier. And I compared a baseline analysis result with a commercial program. I showed precision of approximately ${\pm}$1cm in a baseline length in case of Narrow lane as a result that a baseline analysised a developed program.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2007년도 춘계학술발표회 논문집
• /
• pp.3-6
• /
• 2007

The GPS baseline processing and the network adjustment was required a preliminary classification and check for effective work because the observation data of GPS $3^{rd}$ order control points are enormous attain to about 12,000 points. Particularly, in baseline processing and network adjustment a inaccuracy GPS antenna heights and point names yield a gross error or a S/W computation error. For the baseline processing of observation data, the related all materials were collected and were required a final check. The factor occurring a error, in GPS the baseline processing, were inspected variously after a checking observation data. Also, baseline processing method of GPS $3^{rd}$ order control points were commented and the analysis carry out a results with a experiment. The ellipsoidal distance and height of duplication baseline was compared between adjoin campaign areas for a accuracy analysis of baseline processing. According to the result, the mean is about 1cm for horizontal direction and about 2cm for vertical direction.

• 한국측량학회지
• /
• 제26권2호
• /
• pp.157-164
• /
• 2008

GPS기선해석은 반송파 관측값에 수학적 이중차분을 적용하고 미지정수 결정과정을 거쳐 최소제곱법에 의해 두 측점 사이의 기선벡터를 추정하는 수학적 절차이다. GPS기준점측량에서는 기선벡터망의 형성과 조정작업을 통하여 미지점들의 좌표를 계산한다. 본 논문에서는 2등 측지기준점의 세계측지계 성과산정 시 망조정에 필요한 기선벡터의 생성을 위한 GPS관측데이터 기선해석에 관한 내용을 설명하고 있으며 기선해석에 사용된 GPS관측데이터에 대한 사업내용, 관측방법을 요약하고 기선해석방법과 소프트웨어의 선정에 필요한 기술적 문제를 검토한 후 해석을 실시하고 결과를 분석 정리하였다.

• 한국압력기기공학회 논문집
• /
• 제14권2호
• /
• pp.69-76
• /
• 2018

The paper presents preliminary investigation results for the effect of the baseline correction in the acceleration excitation method on finite element seismic analysis results (such as accumulated equivalent plastic strain, equivalent plastic strain considering cyclic plasticity, von Mises effective stress, etc) of nuclear safety Class I components. For investigation, finite element elastic-plastic time-history seismic analysis is performed for a surge line including a pressurizer lower head, a pressurizer surge nozzle, a surge piping, and a hot leg surge nozzle using the Chaboche hardening model. Analysis is performed for various seismic loading methods such as acceleration excitation methods with and without the baseline correction, and a displacement excitation method. Comparing finite element analysis results, the effect of the baseline correction is investigated. As a result of the investigation, it is identified that finite element analysis results using the three methods do not show significant difference.

• Advances in environmental research
• /
• 제1권4호
• /
• pp.305-321
• /
• 2012

This study entails establishing reference standard sand in Nigeria for engineering and geoenvironmental research work. Sands from four geographical locations in southwestern Nigeria were examined for baseline geotechnical and mineralogical properties. A total of sixteen sand samples were collected. The samples were air dried and subjected to tests in accordance with standard specifications. The tests carried out were: specific gravity, grain size analysis, moisture content, bulk density, porosity, void ratio, chemical analysis, X-ray diffraction and Differential Thermal Analysis. The properties of the samples were compared with a standard (Ottawa sand in Illinois of the United States) in order to find out which of the four samples selected from southwestern Nigeria could serve as standard baseline sand. The results show that Igbokoda sand has geotechnical and mineralogical characteristics closest to Ottawa sand. It was therefore concluded that Igbokoda sand could be used as a standard baseline sand for research work in southwestern Nigeria and other parts of Nigeria since it needs little processing to bring it to the same level as standard baseline sand, like the Ottawa sand.

• KIEAE Journal
• /
• 제13권4호
• /
• pp.11-19
• /
• 2013

The purpose of this study is to establish the assessment baseline of $CO_2$ emissions from building operations in the view of GHG reduction policy in Korea. The assessment baseline of $CO_2$ emissions shall be used in GHG policy and Carbon Credits in building sectors, but the assessment baseline has not been studied enough or established yet. Also, $CO_2$ emissions from building operations will be variable according to the building occupancy. Therefore the baseline will be different and this study aimed at the establishment of the assessment baseline for residential apartments and office buildings firstly. After reviews of BEER and international standards for building $CO_2$ emissions such as ISO and UNEP-SBCI documents, the analysis of BEER certification data has been pursued for 292 residential apartment complexes and 65 office buildings in South Korea during 2004~2012. As analysis results, the assessment baseline was set to 23.03 $kg{\cdot}CO_2/m^2{\cdot}yr$ or 1.95 $t{\cdot}CO_2/unit{\cdot}yr$ for residential apartment complexes, and 95.91 $kg{\cdot}CO_2/m^2{\cdot}yr$ for office buildings according to the BEER certification basis. Additional assessment baselines were calculated according to year basis, region basis, public and private basis, and GHG policy basis. Finally, the established baseline for residential apartment complexes has been applied for the pilot project in M district, Seoul, and showed 24.97% reduction rate according to the BEER certification basis.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1211-1215
• /
• 2005

In the GPS attitude determination system, the baseline length constraints can be used efficiently to reduce the search space. It is possible by adopting the assumptions that the baseline length doesn't change and the true baseline length is precisely known. But in real situation, the baseline length might be changed by many reasons and it is impossible to measure the true baseline length because there exists measurement error and antenna phase centre movement. In order to analyze the effect of the baseline length accuracy, one needs to know the relation between the accuracy of the baseline length and success rates of the integer ambiguity resolution. In this paper, the effect of the baseline length accuracy to the integer ambiguity resolution in the attitude determination system is analyzed by empirical method. The results show that the margins in the baseline length accuracy is less than a few cm which implies that one should take great cares when applying the attitude determination system to the flexible structures.

• Safety and Health at Work
• /
• 제5권1호
• /
• pp.13-16
• /
• 2014

Background: This study assesses influences of baseline psychological risk factors on prevalence of low back pain (LBP) at baseline and follow-up among nurses. Methods: A prospective longitudinal study was performed at two phases, baseline and 1-year follow-up among 246 nurses of university hospitals in Shahroud, Iran. A standardized Cultural and Psychosocial Influences on Disability questionnaire was used for data collection. Logistic regression was performed for analysis. Results: At the baseline of the study, 58.9% of nurses reported back pain in the previous 12 months. Age (p = 0.001), belief that work causes pain (p = 0.022), and somatization tendency (p = 0.002) significantly increased risk of LBP. At 1-year follow-up, prevalence of LBP was 45.7% and expectation of back pain at baseline (p = 0.016) significantly increased risk of LBP in this phase (p < 0.05). Conclusion: Results indicate that risk factors for prevalence of back pain at baseline and 1-year follow-up are different. At baseline, the risk factors are age, belief that work causes pain, and somatization tendency, and at follow-up, expectation of pain is the major risk factor.

• 한국자동차공학회논문집
• /
• 제11권4호
• /
• pp.226-231
• /
• 2003

There have been many attempts to make kart chassis domestically to lower the price of complete kart. However nobody made a successful chassis due to the lack of understanding the characteristics of kart chassis frame. In this work, a baseline chassis frame under the bending and torsional load is studied. Design target is that the baseline chassis frame is quite adequate not only for the beginners but also for the beginning racers. Results from the analysis are used as a guide to design or modify the baseline chassis with the goal of proper torsional stiffness. Minimum increase in weight is being forced. As a result, the baseline chassis frame was designed, made, and tested. Based on the design results, complete karts are being manufactured by the small 1 size domestic company and these karts are being sold and run in the market.

• Journal of the Korean Data and Information Science Society
• /
• 제17권4호
• /
• pp.1289-1297
• /
• 2006

Before other statistical data analysis the preprocessing steps should be performed adequately to have meaningful results. These steps include processes such as baseline correction, normalization, denoising, and multiple alignment. In this paper an algorithm for baseline correction is proposed with using the piecewise cubic Hermite interpolation with block-selected points and local minima after denoising for SELDI or MALDI mass spectrometry data.