• 한국해양공학회지
• /
• 제26권1호
• /
• pp.64-69
• /
• 2012

Dissimilar friction welds were produced using 15-mm diameter solid bars of chrome molybdenum steel (KS SCM440) and carbon steel (KS SM20C) to investigate their mechanical properties. The main friction welding parameters were selected to ensure good quality welds on the basis of visual examination, tensile tests, Vickers hardness surveys of the bond area and HAZ, and macro-structure investigations. The specimens were tested as-welded and post-weld heat treated (PWHT). The tensile strength of the friction welded steel bars was increased to 100% of the SM20C base metal under the condition of a heating time of more than four seconds. Optimal welding conditions were n = 2,000 (rpm), HP = 60 (MPa), UP = 100 (MPa), HT = 5 (s),and UT = 5 (s), when the total upset length was 7.8 (mm). The hardness distribution peak of the friction welded joints could be eliminated using PWHT. The two different kinds of materials were strongly mixed to show a well-combined structure of macro-particles, with no molten material, particle growth, or defects.

• 한국인터넷방송통신학회논문지
• /
• 제14권2호
• /
• pp.59-64
• /
• 2014

본 논문은 이동통신 네트워크에서 WiMAX 백홀 구현에 관한 것이다. 최근에 대부분의 ISP들은 T1/E1 및 디지털 가입자 회선(DSL)을 이용하여 Wi-Fi 백홀을 구축하고 있다. WiMAX가 이동통신 백홀의 대안으로 설치된다면, 설치 및 운용비가 대폭 절감될 것이다. 그리고 유선통신 인프라가 구축되어 있지 않은 서비스 지역을 커버하기 위한 비용 효율적인 솔류선중 하나가 될 것이다. WiMAX는 Base Station, Subscriber Station, 그리고 Relay에 사용될 수 있다. 본 논문에서 WiMAX 서버와 WiMAX SS를 구성하여 NAT 및 Port Forwarding 기능을 이용하여 상 하향에서 성능이 측정되었다.

• 기술경영경제학회:학술대회논문집
• /
• 기술경영경제학회 2000년도 제17회 하계학술발표회 논문집
• /
• pp.47-64
• /
• 2000

This paper analyses characteristics of the numerical controller industry in market formation and the Flow of information between users and producers and the characteristic of knowledge base of the industry and discusses the difficulties derived, from the characteristics, in accumulation of technological capability In market formation betweenusers and producers, the multi-layered market is not favorable to domestic producers in that lower end market is not large enough to provide cardle market to them which produce inferior quality and lower price than importer products. The credibility of the permance of a product is difficult to prove until a critical mass of products are sold. Therefore gaining market share is deterred by unproven credibility of the performance of the product. The flow of information between users and producers is limited. The flow of information on users environment through mass market to producers is essential for improving credibility of a product. The nature of knowledge base is tacit and the means of knowledge transmission is limited. Technological licensing and reverse engineering, Which have been conventional industry. These characteristics provide conditions of vicious circle in accumulation of technological capability of the numerical controller industry. This paper argues that these characteristics of the industry challenges existing approach to R&D management and framework of science and technology policy.

• 한국주조공학회지
• /
• 제28권2호
• /
• pp.64-68
• /
• 2008

The microstructure of Cu-Mg-P base alloys were significantly affected by small amounts of Fe and Co additions, however the tensile properties and electrical conductivity of the Cu alloys were mainly determined by the fabrication process. Relatively high electrical conductivity (> 80% IACS) was obtained in the all Cu-Mg-P based alloys when they were finally aged at $480^{\circ}C$. Tensile properties could be significantly enhanced by final cold rolling, especially at extremely low temperatures. Softening of cold-rolled alloys took place at about $450^{\circ}C$ owing to recovery and recrystallization, but it was delayed up to $500^{\circ}C$ in the Fe-added alloy.

• 설비공학논문집
• /
• 제9권1호
• /
• pp.64-72
• /
• 1997

An experiment study was performed to investigate the optimum cycle of an inverter heat pump as a function of frequency. The performance of the inverter heat pump with the rated cooling capacity of 4141W(3550kcal/h) was measured with a variation of frequency, indoor and outdoor temperature, and length of capillary tube in the psychrometric test room. As a base case, the inverter heat pump with the standard capillary length of 1000mm which was optimum size for the frequency of 60Hz and ARHRAE Test condition A was tested by varying frequency from 30Hz to 80Hz. Then, the optimum cycle was invesigated by varying the length of capillary tube at each frequency levels of 30, 60 and 80Hz. Based on the experimental data, the change of system characteristics between the optimum and the base case were analyzed for each selected frequency levels. Generally, for low frequency level(30Hz), the longer length of the capillary tube compared with the standard size showed the higher EER, while for high frequency level(80Hz) the shorter length of the capillary tube showed the higher EER.

• 설비공학논문집
• /
• 제20권2호
• /
• pp.113-120
• /
• 2008

Potential application of the scroll type machine to air compressor for fuel cell has been studied. Among the seven configuration factors which determine scroll wrap profile, the wrap thickness and the orbiting radius were chosen as two independent variables to generate various scroll wrap profiles. A conceptual design practice was conducted for scroll air compressor for SOFC with power output of 2 kW. With larger wrap thickness and orbiting radius, base plate area of the orbiting scroll becomes smaller, so is the axial gas force acting on the base plate, resulting in reduced thrust loss in spite of larger friction velocity. Performance analysis on the designed model showed that its total efficiency was 64.4% with the mass flow rate per unit compressor input of 0.00905 kg/(s kW) for the wrap thickness of 3.5 mm and the orbiting radius of 3.0 mm.

• 한국농공학회지
• /
• 제39권1호
• /
• pp.64-74
• /
• 1997

A CELTHYM(CEll-based Long-term HYdrologic Model), a pre-processor and a post-processor that can be integrated with geographic information system(GIS) were developed to predict the stream flow from the small agricultural watershed on the daily basis. The CELTHYM calculates the direct runoff from a grid using SCS curve number method and then sum up all of cells with respect to a sub-catchment area belonged to a stream grid and integrated to an outlet. Base flow of a watershed outlet was computed by integrating of the base flow of each stream grid that was averaged the sub-catchment deep-percolation and calculated with the release rate. Two kind of water budget equation were used to compute the water balance in a grid that was classified into not paddy field and paddy field. One of the two equation is a soil water balance equation to account the soil moisture of the upland, forest and excluding paddy field grid. The other is a paddy water balance equation for the paddy field, calculating the ponding depth, the effective rainfall, the deep percolation and the evapotranspiration.

• 한국어류학회지
• /
• 제25권2호
• /
• pp.59-64
• /
• 2013

한국 제주도에서 채집된 곰치과(Muraenidae) 엽상자어 2개체 (전장 36.2~69.2 mm)를 대상으로 mtDNA 12S rRNA 724 base pair 염기서열을 분석한 결과, 한국 통영에서 채집된 나망곰치(Gymnothorax minor) 성어와 100% 일치하였다. 나망곰치 엽상자어는 전체 근절수가 137~139개, 등지느러미 앞 근절수가 32개, 항문앞 근절수가 82~86개, 전장에 대한 체고가 10% 이상인 형태적 특징을 나타내었다.

• The Korean Journal of Ecology
• /
• 제19권3호
• /
• pp.231-240
• /
• 1996

The germination responses of Cassia mimosoides var. nomame seeds to temperature were examined under various conditions. The temperature range allowing germination was $20~40^{\circ}C$, and the linear relationship between the germination rate and temperature appeared to exist between $28~38^{\circ}C$ The total thermal time required for germination (10~80%) of C. mimosoides seeds ranged from 259 Kh (degree Kelvin$\times$hours) to 421 Kh and base temperature range was relatively constant, i.e., $23.39~26.68^{\circ}C$. In the increasing temperature (IT) regime, C. mimosoides seeds started to germinate at $16^{\circ}C$ and showed greater germination rate with increasing temperatures. The final germination rate was 64% at $36^{\circ}C$. On the other hand, in the decreasing temperature (DT) regime, the seeds began to germinate at $36^{\circ}C$, and the final germination rate was 52% at $20^{\circ}C$. An induced dormancy occurred at $16^{\circ}C$ in the DT regime.

• Fibers and Polymers
• /
• 제4권3호
• /
• pp.124-128
• /
• 2003

Dark brown Alpaca fiber was reduced in shade via selective bleaching with peroxide. Two selective oxidative bleaching methods were tested on alpaca top to assess their effectiveness for color removal and fiber quality properties. Color change, bundle strength, weight loss, fiber diameter, surface modification, dye-ability and dye wash fastness were assessed for both methods and compared with the original brown top. Bleach method 1 (BL-I) showed little surface modification, 5.8% weight loss and 2.4% strength loss. D1925 yellowness index was reduced to 74.3 from 83.1 and provided a good base for the dyeing of medium to deep shades. Bleach method 2 (BL-II) displayed considerable surface modification, 7.8% weight loss and 18% strength loss. BL-II also resulted in a mean diameter reduction of 1.9 micron during bleaching. Yellowness was reduced to 64.5 from 83.1 and provided a very good base for the dyeing of medium to deep shades. BL-I showed better exhaustion of the premetallised dye Lanaset Violet B than BL-II. Wash fastness for BL-II was 1 grey scale unit poorer than BL-I. BL-II showed far better color clarity at pale depths however the wash fastness of the finished product was not good enough to maintain the depth or clarity of the color. BL-I showed poorer clarity of color but exhibited better wash fastness results.