• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2011년도 춘계학술대회
• /
• pp.731-734
• /
• 2011

본 논문은 Single hop으로 구성된 WSN(Wireless Sensor Network)의 저전력 구성방식을 제안한다. WSN 시스템 동작 시 각 Tag간 RF통신이 이루어 질 때 가장 많은 전력을 소모한다. 그렇기 때문에 해당 RF통신 모듈을 주기적으로 on/off를 하여 Network를 구성한다면 상대적으로 Toggle하지 않고 항시 해당 모듈을 동작시키는 것 보다 많은 전력 소모를 방지 할 수 있다. 하지만 RF통신 모듈이 off인 상태에서는 외부적인 어떠한 통신 신호도 받을 수 없기에 Tag와 Base station사이 서로 간 송수신 통신이 이루어질시 일부분 Data누락이 일어날 수 있다. 이에 본 논문에서는 RF통신 모듈을 내부 명령어를 통해 시스템적으로 Toggle함과 동시에 Tag와 Base station간 송수신 통신이 이루어질시 누락되는 Data없이 적절한 통신이 이루어지게끔 구성된 알고리즘을 제안한다.

• 한국지진공학회논문집
• /
• 제3권4호
• /
• pp.11-22
• /
• 1999

본 논문에서는 일반적으로 사용되고 있느 면진건축물의 내진설계기준에 대한 타당성을 검증하고 새로운 층지진하중 산정식을 제안하였다 UBC-91의 층지진하중 산정식은 충분한 안전성을 가지지 못하였으므로 94년에 개정이 되었다 그러나 개정된 산정식도 고정기초건축물과 유사한 층지진하중 산정식을 사용하였으므로 비경제성이 문제점으로 지적되고 있다 그러므로 제안된 식에서는 2자유도계 면진건축물과 고정기초건축물의 모드형상을 이용하여 안전성, 경제성 및 적용성을 만족시키도록 하였다. 제안된 층지진하중 산정식의 정확성 및 적용성을 검증하기 위하여 코멘트저항 골조형식과 전단변 구조형식의 구조물의 예제해석을 수행하였으며 동적해석의 경우와 근접한 결과를 얻었다.

• Archives of Reconstructive Microsurgery
• /
• 제25권2호
• /
• pp.25-28
• /
• 2016

Purpose: Reconstruction of small defects of the dorsal fingers and toes is a challenging task. Although adipofascial flap is widely used for these areas, additional refinements are warranted. In this paper, we define the appropriate defect size in the finger and toes that can be treated with the adipofascial flap, refine its surgical indications and present a few surgical tips. Materials and Methods: Twelve patients with dorsal defects of the fingers and toes were treated with a random-type adipofascial turn-over flap and skin graft. If the defect area exceeded the size that could be covered by a conventional design, the flap base was designed in oblique or curvilinear fashion to lengthen the flap. For accurate defect coverage, the width of the flap base was designed in an asymmetrical shape depending on the defect configuration, varying the width from 0.3 to 1.0 cm, as opposed to the standard 0.5 to 1.0 cm width. Moreover, the lateral limit of the flap was defined as the lateral axial line. The size of the defect ranged from $3.0{\times}1.7cm$ to $1.5{\times}1.3cm$. Results: All flaps survived completely. Gliding function of the hand was well preserved and there was no evidence of tendon adhesion. Conclusion: The small defect in the dorsal finger and toe can be defined as less than one phalanx-length, measuring about $3.0{\times}2.0cm$ in size. If the defect exceeds this dimension, it is recommended that a different option be considered. We believe the adipofascial flap is an excellent option for treating small defects.

• Bulletin of the Korean Chemical Society
• /
• 제28권11호
• /
• pp.1951-1957
• /
• 2007

A new synthetic strategy based on the acid-base catalyzed sol-gel method was developed for the preparation of a series of mesoporous TiO2 nanoparticles. A key feature of the method involves a gradual change in pH (0.8- 9) during the sol-gel transition, which guarantees easy introduction of mesoporosity without relying on the well-established sonochemical or template approach. In addition, this method leads to the exclusive formation of the anatase phase stable enough to the calcination temperature up to 600 oC. The physicochemical properties of the particles in the series were characterized by various spectroscopic and analytical techniques such as wide-angle XRD, SAXRD, BET surface area, FE-SEM, TEM, FT-IR, TGA, and XPS. The photocatalytic efficiency of these materials was investigated for the oxidation of toluene under UV-irradiation. All but T-ad in the series exhibited high photocatalytic activity pushing the reaction into completion within 3 h. The reaction followed the first order kinetics, and the rate reaches as high as 3.9 × 10?2/min which exceeds the one with the commercially available Degussa P-25 by a factor of 3.2. When comparison is made among the catalysts, the reactivity increases with increase in the calcination temperature which in turn increases the crystallinity of the anatase phase, thus revealing the following rate orders: T-3 < T-4 < T-5 < T-6.

• 기계저널
• /
• 제20권3호
• /
• pp.184-193
• /
• 1980

제1절에서는 CAD/CAM 이 기계공업의 발전에 중요한 역할을 담당하고 있으며 그 이유가 무엇 인가를 설명하였다. 설명의 목적은 이와 같은 역사적인 흐름을 정확히 제시하므로써 우리 기계 공업이 나가는 방향을 설정하는데 있어 정확한 상황판단을 도우려 하였다. 제2절, 제3절 및 제4 절을 통해 CAD/CAM의 내용이 무언가를 설명 하였다. 제2절에서는 현대적 의미의 CAD/CAM을 설명하였고 제3절과 제4절에서 는 이에 필요한 전자계산기 System의 Hardware 와 Software를 설명하였다. 특히 제3절의 Work Station의 구성은 사람과 기계간의 직접적인 대화 수단이라는 면에서 대단히 중요한 의미를 가지며, 제4절에 설명된 각 Software에 의해 수행되고, 형성, 전 달되는 Data Base의 생성과 그 이용은 재래의 생산과정에서 발생되는 여러 문제가 어떻게 전 자계산기 내에서 처리되는지를 이해하는데 도움을 준다. 비록 우리의 기계공업이 아직 선진기 술을 받아드릴 여건이 되어 있지 않다 하더라도 외국의 발전 상황에 항상 정확한 정보를 입수 하고 있어야 한다. 이와 같이 정확한 자기 위치의 판단은 외국과의 기술제휴나 기술교류에 있어 가 능한 좋은 조건을 선택할 수 있는 기본이 되는 것이며 자체연구의 방향을 정확히 제시할 수 있는 능력을 가질 수 있는 것이다. 제5절에서는 CAD/CAM의 국내현황과 방향에 대해 언급하 였다. 국내의 기술수준의 후진성 때문에 협의의 CAD/CAM과 현대의미의 CAD/CAM이 명확한 구별 없이 사용되었다. 결론적으로 각 기업은 가까운 미래에 당면할 사태를 준비한다는 입장 에서 하루빨리 전자계산기를 생산 활동에 사용할 수 있도록 하여 필요한 요원을 교육하는 것이 바람직하다. 초기에 큰 투자없이 System을 개발 사용하기 위하여 기존 전자계산소를 이용하는 방법이 바람직하며 System의 도입은 자체운영을 결정하기 전에 경제적인 여건 등 여러가지 문제를 검토하여야 한다. 특히 Turn Key Base로 System를 도입할 경우에는 System의 도입목 적과 사용빈도, 앞으로의 확장성 현재 설계및 생산 과정과의 마찰가능성, 유지보수문제 등을 신 중히 검토하여야 한다. 이제 기계공업도 전자계산기를 이해하고 사용하므로 서 발전할 수 있는 단계가 되었다. 예로부터 좋은 공구를 개발하여 적절히 사용하는 것이 기계공업 발전의 첩경이 었다. 전자계산기는 현대 기술이 개발한 가장 강력하고 사용하기 좋은 공구이다.

• Nuclear Engineering and Technology
• /
• 제51권5호
• /
• pp.1428-1435
• /
• 2019

The total ionizing dose (TID) and non ionizing energy loss (NIEL) effects of 100 MeV phosphorous ($P^{7+}$) and 80 MeV nitrogen ($N^{6+}$) ions on 200 GHz silicon-germanium heterojunction bipolar transistors (SiGe HBTs) were examined in the total dose range from 1 to 100 Mrad(Si). The in-situ I-V characteristics like Gummel characteristics, excess base current (${\Delta}I_B$), net oxide trapped charge ($N_{OX}$), current gain ($h_{FE}$), avalanche multiplication (M-1), neutral base recombination (NBR) and output characteristics ($I_C-V_{CE}$) were analysed before and after irradiation. The significant degradation in device parameters was observed after $100MeV\;P^{7+}$ and $80MeV\;N^{6+}$ ion irradiation. The $100MeV\;P^{7+}$ ions create more damage in the SiGe HBT structure and in turn degrade the electrical characteristics of SiGe HBTs more when compared to $80MeV\;N^{6+}$. The SiGe HBTs irradiated up to 100 Mrad of total dose were annealed from $50^{\circ}C$ to $400^{\circ}C$ in different steps for 30 min duration in order to study the recovery of electrical characteristics. The recovery factors (RFs) are employed to analyse the contribution of room temperature and isochronal annealing in total recovery.

• Tribology and Lubricants
• /
• 제20권5호
• /
• pp.272-277
• /
• 2004

This study deals with the friction and wear characteristics of C-N coated spur gear. The PSII apparatus was built and a SCM415 test piece and test gear with steel substrate was treated with carbon nitrogen by this apparatus. The composition and structure of the surface layer were analyzed and compared with that of PVD coated TiN layer. It was found that both of friction coefficient of C-N coating and TiN coating decreased with increasing load, however, C-N coating showed relatively lower friction coefficient than that of TiN coating. We was investigated the effect of C-N coating on hardness, friction and wear. The TiN coated gear showed a more serious friction phenomena than that of C-N coated gear. It was considered that coating of TiN, which was conducted at a vacuum chamber at about 500$^{\circ}C$, results in a tempering of base material that causes microstructural change, which in turn resulted in decreasing of hardness. The C-N coated gear and pinion had higher wear resistance that of TiN coated gear and pinion. C-N coating significantly improved the friction and wear resistance of the gear.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권12호
• /
• pp.1045-1052
• /
• 2020

This study aims to test the influence of employee competency and career management on career commitment in Indonesia. The study uses the cross-sectional data of regional government employees collected from February to April 2020. Regression and structural equation modeling are employed. The results base on the effect of employee competency and career management on career commitment in Indonesia are in line with the existing theory (i.e., Bandura's Career Theory). Employee competency has a significant positive influence on career management and career commitment, which shows that regional government employees with high competency generate effective career management, and in turn career commitment increased. Regional governments with their career management program should formulate human resources management practice policy (e.g., career support, training, career development program, and orientation programs) in order to increase their competency. The positive effect of employee competency on career management is because of the effective training and career development program. The positive influence of career management on career commitment is due to the regional government providing an attractive career program, thus, employees' career commitment improved. The positive influence of employee competency on career commitment via career management is implemented by regional government support to improve the career management program.

• Bulletin of the Korean Chemical Society
• /
• 제32권5호
• /
• pp.1495-1499
• /
• 2011

A solution processable polymer was synthesized, by incorporating pyrene groups into the backbone of the polyaniline chain, and used as an emissive layer in an organic light emitting diode. The polyaniline base was reacted with acid chloride of pyrene butyric acid to form pyrene-functionalized polyaniline chains. The source of pyrene moiety was acid chloride of pyrene butyric acid. The formation of polymer from acid chloride of pyrene butyric acid and polyaniline was confirmed by the FTIR and $^1H$-NMR spectroscopy. Differential scanning calorimetry revealed high glass transition temperature of 210 $^{\circ}C$. Due to the presence of pyrene moieties in the backbone, the polyaniline synthesized in the present study is solution processable with light emitting property. The photoluminescence spectrum of the polymer revealed that emission lies in the blue region, with a peak at 475 nm. The light emitting device of this polymer exhibits the turn-on voltage of 15 V.

• 전기의세계
• /
• 제29권8호
• /
• pp.524-531
• /
• 1980

In order to investigate the effect of inorganic dielectric fine particle mixed in Low Density Polyethylene on the deterioration by treeing, a comparative study for initiation and development of the tree has been carried out between the pure thin film specimen and the same geometrical specimen mixed with a constant weight percent by a defiend particle size of $Al_{2}$O$_{3}$ and SiO$_{2}$, having larger dielectric constants than that of the base material. According to the results, it has been observed that as increasing dielectric constant, the initiation of tree is expedited, however, the development of the tree reached at the surface of filler particles shows the suppressive trends. From these facts, a reasonable interpretation may be possible by considering the effect of intensified electrical field around the tip in the presence of filler particles, that the initiation and the development of tree are a mechanical break down process caused by Maxwell stress due to the concentration of electrical field at the tip. This suppressive effect is specifically suggestive for the reason that a discharge route must be constructed around the particle surface because of the intensified field strength near filler, which, in turn, reduces the geometrical curvature of the tip so that the local intensity of electrical field can be relaxed. Further more an experimental evidence for this assumption was able to observe in this investigation.