• Magazine of the Korean Society of Agricultural Engineers
• /
• v.30 no.1
• /
• pp.38-49
• /
• 1988

This paper presented as follows results of laboratory model tests with various shaped footings on soil bed reinforced with the strips on the base of behaviour of soil structure according to the loads and triaxial test results reinforced with geotextiles. Their parameters studied were the effects on the bearing capacity of a footing of the first layer of reinforcement, horizontal and vertical spacing of layers, number of layers, tensile strength of reinforcement and iclination load to the vertical 1.Depending on the strip arrangement, ultimate bearing capacity values could be more improved than urreinforced soil and the failure of soil was that the soil structure was transfered from the macrospace to microspase and its arrangement, from edge to edge to face to face. 2.The reinforcement was produced the reinforcing effects due to controlling the value of factor of one and permeable reinforcement was never a barrier of drainage condition. 3.Strength ratio was decreased as a linear shape according to increment of saturation degree of soil used even though at the lower strength ratio, the value of M-factor was rot influenced on the strength ratio but impermeable reinforcement decreased the strength of bearing capacity. 4.Ultimate bearing capacity under the plane-strain condition was appeared a little larger than triaxial or the other theoretical formulars and the circular footing more effective. 5.The maximum reinforcing effects were obtained at U I B=o.5, B / B=3 and N=3, when over that limit only acting as a anchor, and same strength of fabric appeared larger reinforcing effects compared to the thinner one. 6.As the LDR increased, more and more BCR occurred and there was appeared a block action below Z / B=O.5, but over the value, decrement of BCR was shown linear relation, and no effects above one. 7.The coefficient of the inclination was shown of minimum at the three layers of fabrics, but the value of H / B related to the ultimate load was decreased as increment of inclination degree, even though over the value of 4.5 there wasn't expected to the reinforcing effects As a consequence of the effects on load inclination, the degree of inclination of 15 per cent was decreased the bearing capacity of 70 per cent but irnproved the effects of 45 per cent through the insertion of geotextile.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.11a
• /
• pp.557-563
• /
• 2004

Korean cadastral system keeps graphical maps made by the plane table method from 1910's. The fact is that the graphical maps grafted on paper cover about 95% of the whole land (MOGAHA, 1999). The needs are arising to transform the graphical cadastre to a digital one in compliance with modem technologies. Korean government has already digitise the old maps until last year. A nation-wide land information system, Parcel-based Land Information System, was established upon the digitised map database. However, the accuracy of the digitised coordinates hardly meet the citizens' needs because it cannot exceed that of the paper maps. The definite solution will be surveying all the parcels again and making new digital maps. However, commencing a project for resurveying 34 million parcels will require enormous amount of time and manpower. The strategy should be dividing the country into county-wise or grid-wise pieces and surveying one piece by one piece. Municipal governments of counties, cities or urban districts will be the propelling bodies of the project but the costs will hardly be affordable at a time. For the purpose of resolving the financial problem, each municipality can split its own project into smaller pieces by year base. There is accordingly a great possibility to create inconsistency over the divided project areas caused by different techniques applied, different equipments used and/or mismatches between the project borders. It provides some merits at the same time. The people in project completion areas will be satisfied with the enhanced accuracy and feel safe in land transaction and, in turn, soundly improves overall nation-wide economic situation. Therefore, the main issue of the thesis shows how to make the cadastral re-survey project scalable. Guidelines for how to perform the projects will be derived from a experienced case.

• Clinics in Shoulder and Elbow
• /
• v.8 no.2
• /
• pp.105-109
• /
• 2005

Purpose: To Analyze the exit site of pin inserted at the anterior glenoid rim in the reconstruction of the Bankart lesion and SLAP lesion using transglenoid suture technique. Materials and Methods: In the twenty adult right cadeveric scapula, insertions of pin were performed using guide at the position of 1, 2, 3 O'clock of glenoid rim. We measured the exit site of dorsal surface of the scapula by medial distance from sagittal plane of lateral border of scapular spine and the vertical distance from posterior border of the scapular spine. Results: When the pin was inserted caudally within 10 degree, at the position of 1, 2, 3 O'clock, the medial distance from lateral border of the scapula is averaged 29.4, 19.2, 34.0 mm respectively and the vertical distance from posterior border of the scapular spine is averaged 15.0, 18.6, 17.2 mm respectively. When the pin was inserted caudally within 20-30 degree, the medial distance is averaged 14.6, 14.2, 15.8 mm respectively and the vertical distance is averaged 31.6, 31.9, 32.1 mm respectively. Conclusion: When the pin was inserted caudally within ten degrees using the guide, the pin exit appeared at the more medial side of the base of scapular spine and the more inferior of scapular spine. This can make the firm suture tied over scapular spine during repair SLAP and the Bankart lesion, and also prevent the injury of suprascapular nerve.

• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.2
• /
• pp.196-209
• /
• 2010

For the analysis of Acoustic Target Strength(TS) that indicates the scattered acoustic intensity from the underwater vehicles, an analysis program that is applicable to scatterers insonified by spherical wave source in near field is developed. In this program, the Physical Optics(PO) method is embedded as a base component. To increase the accuracy of the program, multiple bounce effects based on Geometrical Optics(GO) method are applied. To implement multiple bounce effects, GO method is used together with PO method. In detail, GO method has a concern in the evaluation of the effective area, and PO method is involved in the calculation of Acoustic Target Strength for the final effective area that is evaluated by GO method. For the embodiment of near field spherical wave source originated multiple bounce effects, image source concept is implemented additively to the existing multiple bounce algorithm which assumes plane wave insonification. Various types of models are tested to evaluate the reliability of the developed program and finally, a submarine is analyzed as an arbitrary scatterer.

• The Journal of the Korea Contents Association
• /
• v.10 no.1
• /
• pp.147-159
• /
• 2010

The touch screen phone launched domestically in Korea, unlike the existing plane UI, it applied a cubic shape of 3D UI which provides three dimensional solid graphic. This study proposes to examine the correlation between the users' experience of 3D GUI, which were made by two different companies, and the brand. From this point of view, this study sets up a hypothesis about intimate correlation between individual differentiated brand and the user experience. Base on that, a model was designed. This study measured the satisfaction of user experience through the disclosure and non-disclosure of brand, focusing on 3D GUI cases which were launched so far, and it demonstrated that there was a clear difference in the degree of satisfaction. Through this examine, a brand was confirmed as one of the important element of user experience in using the 3D GUI that was launched competitively by companies. Therefore, the result of this study suggest that the designers need to establish strategies that make the brand as the core subject of design during the process of manufacturing product and service.

• Journal of Korean Society for Geospatial Information Science
• /
• v.3 no.2 s.6
• /
• pp.29-42
• /
• 1995

Route design in topographical plane map brings many problems in efficiency and requires much time and labor by hand Recently, the active studies of efficient route design method using 3-D terrain information are being developed according to increasing concentration on GSIS. In order to analyze terrain information for route design efficiently, this study presents objective and overall datum by applying SQL in construction and analysis of database and the possibility of three-dimensional terrain information analysis, This study generates 3-D base map on topographical map of scale 1:5,000 and acquires terrain information that have various thematic map data; contour, land use, roadway, and drange. This is a study on the application of SQL in route design and construction of the terrain information that linked by graphic datum of completed topographical map and attributed datum of database. As the result of this study, we can produce promptly and efficiently design datum of profile annotation, cross section, and volume computations to the preliminary route for route design and apply this efficient method to route design by understanding visual DTM which is composed of the roadway and the natural scene after design.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.28 no.5
• /
• pp.341-347
• /
• 2002

This study was designed to determine the location of the mandibular canal on lower molar areas. Thirty-three patients were examined with multi-planar reformatted CT scan($Dentascan^{(R)}$). Three kinds of measurements were performed. The first was the distances between the upper border of the mandibular canal and the root apices of the first and second molars, the second was the distance between the cortical plate of the mandible and mandibular canal, and the last was the location of the mandibular canal in the buccolingual plane. The obtained results are as follows 1. The distance between the root apices of lower molars and the superior border of mandibular canal was largest at the mesial root of the first molar, and shortest at the distal root of the second molar(p<0.05). 2. The longest distance between the outer surface of the buccal cortical plate of the mandible and mandibular canal was measured from the distal root of the second molar, and this distance decrease gradually mesially(p<0.05). 3. The distance between the mandibular base and inferior border of mandibular canal was longest at the distal root of the second molar, and shortest at the mesial root of the first molar(p<0.05). 4. The location of mandibular canal was lingually positioned in relation to the axis of teeth and alveolar ridge in molar areas.

• Journal of Korean Foot and Ankle Society
• /
• v.18 no.4
• /
• pp.178-182
• /
• 2014

Purpose: The purpose of this study was to evaluate the frequency of troughing and stress fracture, which are the major complications of scarf osteotomy, and to suggest methods to prevent these complications. Materials and Methods: We reviewed 243 cases of 137 patients treated with the scarf osteotomy for hallux valgus from January 2005 to December 2012. The mean follow-up period was 2.8 years. During the scarf osteotomy, a long oblique longitudinal osteotomy was performed in order to decrease the possibility of troughing and stress fracture. Radiographs of lateral view of the foot were obtained and the thicknesses of the first metatarsal base at the sagittal plane were measured and compared. Results: There was no troughing during fragment translation and screw fixation intraoperatively. Radiographs of lateral view of the foot taken preoperatively and at the last follow-up showed that the mean thickness of the first metatarsal was 22.4 mm preoperatively and 21.6 mm at the last follow-up, with a mean difference of 0.8 mm. And no stress fracture was observed. Conclusion: To prevent troughing and stress fracture, a long oblique longitudinal cut, parallel to the first metatarsal plantar surface, was performed, making both ends of the proximal segment truncated cone-shape, and securing the strong bony strut of the proximal segment. No troughing or stress fracture was experienced with scarf osteotomy.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.05a
• /
• pp.300-305
• /
• 2003

Reduced activation ferritic (JLF-1) steel is leading candidates for blanket/first-wall structures of the D-T fusion reactor. In fusion application, structural materials will suffer effects of repeated changes of temperature. Therefore, the data base of tensile strength and fracture toughness at operated temperature $400^{\circ}C$ are very important. Fracture toughness ($J_{IC}$) and tensile tests were carried out at room temperature and elevated temperature ($400^{\circ}C$). Fracture toughness tests were performed with two type size to investigate the relationship between the constraint effect of a size and the fracture toughness resistance curve. As the results, the tensile strength and the fracture toughness values of the JLF-1 steel are slightly decreased with increasing temperature. The fracture resistance curve increased with increasing plane size and decreased with increasing thickness. The fracture toughness values of JLF-1 steel at room temperature and at $400^{\circ}C$ shows an excellent fracture toughness ($J_{IC}$) of about $530kJ/m^2\;and\;340kJ/m^2$, respectively.

• The korean journal of orthodontics
• /
• v.51 no.5
• /
• pp.337-345
• /
• 2021

Objective: To investigate the phenotypes and predominant skeletodental pattern in pre-adolescent patients with Pierre-Robin sequence (PRS). Methods: The samples consisted of 26 Korean pre-adolescent PRS patients (11 boys and 15 girls; mean age at the investigation, 9.20 years) treated at the Department of Orthodontics, Seoul National University Dental Hospital between 1998 and 2019. Dental phenotypes, oral manifestation, cephalometric variables, and associated anomalies were investigated and statistically analyzed. Results: Congenitally missing teeth (CMT) were found in 34.6% of the patients (n = 9/26, 20 teeth, 2.22 teeth per patient) with 55.5% (n = 5/9) exhibiting bilaterally symmetric missing pattern. The mandibular incisors were the most common CMT (n = 11/20). Predominant skeletodental patterns included Class II relationship (57.7%), posteriorly positioned maxilla (76.9%) and mandible (92.3%), hyper-divergent pattern (92.3%), high gonial angle (65.4%), small mandibular body length to anterior cranial base ratio (65.4%), linguoversion of the maxillary incisors (76.9%), and linguoversion of the mandibular incisors (80.8%). Incomplete cleft palate (CP) of hard palate with complete CP of soft palate (61.5%) was the most frequently observed, followed by complete CP of hard and soft palate (19.2%) and CP of soft palate (19.2%) (p < 0.05). However, CP severity did not show a significant correlation with any cephalometric variables except incisor mandibular plane angle (p < 0.05). Five craniofacial and 15 extra-craniofacial anomalies were observed (53.8% patients); this implicated the need of routine screening. Conclusions: The results might provide primary data for individualized diagnosis and treatment planning for pre-adolescent PRS patients despite a single institution-based data.