• 한국가금학회지
• /
• 제20권3호
• /
• pp.151-159
• /
• 1993

본 연구는 항콕시듐 제제로 광범위하게 쓰이고 있는 nicarbazin이 닭의 고온 스트레스에 미치는 영향을 조사하고자 16수의 SCWL 수탉 성계를 사용하여 실시하였다. 옥수수-대두박 위주의 사료에 두 수준(0 및 125ppm)의 rucarbazin을 첨가하여, 두 처리의 환경온도(21 와 35~$36^{\circ}C$)하에서 4일간의 예비실험 기간을 거친 후, 2일 동안의 시료 및 자료 수집기간을 가졌다. 건물 섭취량과 건물 배설량은 고온 스트레스에 의하여 유의한 영향을 받지 않았으나, ricarbazin 첨가에 의하여 증가하였다. 그러나 건물 대사율은 nicarbazin첨가에 의하여 유의하게 감소하였다. 고온 스트레스는 또한 음수량과 증발에 의한 수분 손실을 증가시켰고, nicarbazin은 이러한 효과를 더욱 심화시켰다. 혈액 pH는 고온하에서 nicarbazin 첨가에 의해 증가되었으며, p$CO_2$는 고온하에서 nicarbazin에 의해 감소되었다. 고온 스트레스는 또한 체온을 상승시켰으며 nicarbazin 첨가는 이러한 효과를 심화시켰다. 이상의 결과를 종합하면, 닭이 고온 스트레스를 받으면 체온이 상승하게 된다. 따라서 닭은 체온 상승을 억제하기 위하여 호흡수를 증가시켜(panting) 수분 증발을 통한 체열 방출을 많게 한다. 그러나 nicarbazin 첨가는 고온하의 수탉 체온 상승 폭을 워낙 크게 하므로, panting에 의한 체열 방출량 증가만으로는 정상 체온을 유지하기가 어렵게 되는 것으로 풀이된다

• 한국세라믹학회지
• /
• 제11권2호
• /
• pp.3-10
• /
• 1974

For the manufacture of the silver-yellow glass, silver nitrate was used as a colorant in the base glass of $K_2O$-CaO-$SiO_2$ system. The latter in which the optimum condition was revealed showing beautiful yellow color had been selected among others after the preparatory studies to choose base glass. Other base glass systems considered were $Na_2O$-CaO-$SiO_2$, $R_2O$-PbO-$SiO_2$ and $R_2O$-PbO-BaO-$SiO_2$. The color developed on the specimen in various conditions was examined, using spectorphotometer, in term of the changes in absorbance with wavelength in the visible range. Experimental variables were the amount of the colorant and the additives, reheating temperature and time. The additives such as ZnO, BaO, $B_2O_3$ and $As_2O_3$ were added to increase the coloring action. It was observed that as the amount of silver increased in the base glass the absorbance around $410{\mu}m$ showed the increasing tendency, but the width of absorption curve was wider. Hence, the optimum amount of silver appeared to be 0.11~0.12%. It was found that ZnO was effective additive when present about 0.1%, while $As_2O_3$ ineffective rather retarding the coloration. Borax and $BaCO_3$ were proved effective when contained separately, but appeared ineffective when coexisted. Proper reheating temperature and time was ranged 550~$580^{\circ}C$ and 50~60 minutes. The higher the reheating temperature and the longer the reheating time, the absorbance was increased, while the width of absorption curve was wider. The colored glass prepared in the present experimental condition was found to have good water-resistance for the decorative purpose.

• Journal of Welding and Joining
• /
• 제26권5호
• /
• pp.60-65
• /
• 2008

Ferritic stainless steels of the 400 series have been available for automotive exhaust system, heat exchanger, radiater etc. in various industrial because heat resistance, corrosion resistance and strength are excellent. Especially, automotive exhaust system is required good heat resistance because typical temperature of exhaust system exposed during operation of engine is reach up to $800^{\circ}C$. However, research for effect of high temperature in ferritic stainless steels is not enough. In this study, high temperature tensile properties of lap weld of ferritic stainless steels(STS 429) were investigated. In accordance with heat input, lap welds had been produced and were evaluated at high temperature($800^{\circ}C$) to compare high temperature tensile properties. In addition, room temperature tensile tests were carried out for non-aging and aging specimens. As a result of R.T tensile test, non-aging specimens were fractured in base metal except for low heat input specimen and aging specimens were fractured in weld metal. Also high temperature tensile test were carried out by aging specimen. After high temperature tensile test, fracture of aged specimen was occurred in base metal except for low heat input specimen. Fracture surface of low heat input specimen in weld metal was confirmed as brittle fracture with observation using scanning electron microscope(SEM). Significant decrease in ultimate tensile strength (between 82 and 85%) was observed for aged ferritic stainless steels(STS 429) when tested at high temperature.

• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 2000년도 춘계총회 및 학술발표회
• /
• pp.25-25
• /
• 2000

• 한국도로학회:학술대회논문집
• /
• 한국도로학회 2009년도 추계학술대회 논문집
• /
• pp.391-396
• /
• 2009

• 분석과학
• /
• 제5권4호
• /
• pp.433-441
• /
• 1992

국내의 23개 무연탄을 대상으로 석탄회의 화학분석 및 용융특성분석을 수행하여 석탄회의 화학조성과 용융온도와의 상관성을 고찰하였다. 또한 이들 무연탄을 미분탄 연소의 연료로 사용시 야기될 수 있는 slagging, fouling성을 예측하여 보았다. 국내 무연탄회는 대부분 $SiO_2$와 $Al_2O_3$를 80% 이상 함유하고 있는 반면 1% 이하의 적은 양의 $Na_2O$를 함유하고 있으며, 또한 비교적 높은 용융온도를 갖는다. 따라서 이 무연탄들을 미분탄 연소의 연료로 사용시 slagging 및 fouling 발생 가능성은 낮을 것으로 예측되었다. 국내 무연탄회의 용융특성은 base/acid ratio와 비교적 높은 상관성을 갖는 것으로 나타났다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.21-24
• /
• 2006

Processes controlling the interannual variation of mixed layer temperature (MLT) averaged over the NINO3 domain ($150-90^{\circ}W$, $5^{\circ}N-5^{\circ}S$) are studied using an ocean data assimilation product that covers the period of 1993 to 2003. Advective tendencies are estimated here as the temperature fluxes through the domain's boundaries, with the boundary temperature referenced to the domain-averaged temperature to remove the dependence on temperature scale. The overall balance is such that surface heat flux opposes the MLT change but horizontal advection and subsurface processes assist the change. The zonal advective tendency is caused primarily by large-scale advection of warm-pool water through the western boundary of the domain. The meridional advective tendency is contributed mostly by Ekman current advecting large-scale temperature anomalies though the southern boundary of the domain. Unlike many previous studies, we explicitly evaluate the subsurface processes that consist of vertical mixing and entrainment. In particular, a rigorous method to estimate entrainment allows an exact budget closure. The vertical mixing across the mixed layer (ML) base has a contribution in phase with the MLT change. The entrainment tendency due to temporal change in ML depth is negligible comparing to other subsurface processes. The entrainment tendency by vertical advection across the ML base is dominated by large-scale changes in wind-driven upwelling and temperature of upwelling water. Tropical instability waves (TIWs) result in smaller-scale vertical advection that warms the domain during La Ni? cooling events. When the advective tendencies are evaluated by spatially averaging the conventional local advective tendencies of temperature, the apparent effects of currents with spatial scales smaller than the domain (such as TIWs) become very important as they redistribute heat within the NINO3 domain. However, such internal redistribution of heat does not represent external processes that control the domain-averaged MLT.

• 항공우주기술
• /
• 제11권1호
• /
• pp.68-77
• /
• 2012

공기를 이용한 축소형 4 노즐 클러스터드 엔진 저부 유동에 대한 CFD 해석을 수행하여 수치 방법에 대한 비교와 저부 유동을 분석하였다. 해석결과 Roe나 AUSM의 공간 차분법에 따른 차이는 없었으며, Spalart-Allmaras 1 방정식 난류 모델이 SST k-${\omega}$ 모델이나 k-${\varepsilon}$ 모델에 비하여 본 연구에 비교적 적합한 것으로 나타났다. 클러스터드 엔진 저부 영역은 팽창된 노즐 플룸이 서로 만나면서 고압의 정체 영역을 일부 형성하며, 일부의 플룸이 저부 방향으로 역류 팽창하는 것이 관측된다. 저부로 팽창된 플룸은 노즐과 노즐 사이의 최소 공간으로 정의되는 "최소 배출면"을 통해 외기로 빠져 나가는 데 저부면에 가까울수록 더욱 빠른 속도로 빠져나가고 경험적 이론과 다르게 노즐과 노즐 사이의 공간 전체가 유동의 목을 형성하는 것이 아닌 것으로 확인된다. 또한 노즐 벽면 온도가 역류 플룸의 온도에 큰 영향을 끼치는 것을 확인하였다.

• Journal of Welding and Joining
• /
• 제31권1호
• /
• pp.58-64
• /
• 2013

The following results were obtained, microstructures and tensile properties in arc brazed joints of DP(dual phase) steel using Cu-5.3wt%Sn insert metal was investigated as function of brazing current. 1) The Fusion Zone was composed of ${\alpha}Fe+{\gamma}Cu$ and Cu23Sn2. The reason for the formation of these solid solutions. Despite, Fe & Cu were impossible to solid solution at room temperature. It's melting & reaction to something of insert metal & Base Metal (DP Steel) by Arc. Brazing Process has faster cooling rate then Cast Process, Supersaturated solid solution at room temperature. 2) The increase Hardness of Fusion Zone was directly proportional to the rise of welding current. Because, ${\alpha}Fe+{\gamma}Cu$ phase (higher hardness than the Cu23Sn2.(104.1Hv < 271.9Hv)) Volume fraction was Growth, due to increasing the amount of base metal melting by High current. 3) The results of tensile shear test by Brazing, All specimens happen to fracture in Fusion Zone. On the other hand, when Brazing Current increasing tend to rise tensile load. but it was very small, about 26-30% of the base metal. 4) The result of fracture analysis, The crack initiate at Triple Point for meet to Upper B.M/Under B.M/Fusion Zone. This Crack propagated to Fusion zone. So ruptured by tensile strength. The Reason to in the fusion zone fracture, Fusion zone by Brazing of hardness (strength) was very lower then the base metal (DP steel). In addition the Fusion Zone's thickness in triple point was thin than the base metal's thickness in triple point.

• 한국항공우주학회지
• /
• 제40권9호
• /
• pp.737-744
• /
• 2012

유한체적법을 이용하여 설정된 가상의 노즐 조건에 따라 비행체 배기플룸의 SE와 PE에 의한 열복사 저부가열 해석 연구를 수행하였다. 저부면에서의 복사열유속을 얻기 위해 배기플룸은 흡수, 방사 및 산란하는 매질을 고려하였다. 저부면은 차가운 흑체이고 비회색가스와 입자의 복사 물성치는 회색가스가중합법(WSGGM)을 사용하였다. 후방 몬테카를로 방법을 사용한 기존의 연구와 비교하여 검증한 후, 입자의 농도, 온도, 그리고 등방성 또는 이방성 산란에 따른 복사저부가열을 해석하였다. 그 결과, 복사열유속은 노즐 출구와의 거리가 멀어지거나 비행 고도가 증가할수록 감소하고 입자의 온도가 높아질수록 복사열유속은 증가한다. 또한 전방산란은 PE를 증가시키고 후방산란은 SE를 증가시켰다.