• Structural Engineering and Mechanics
• /
• v.82 no.4
• /
• pp.417-434
• /
• 2022

In this work, a review of mechanical metamaterials and seismic protection systems that use them is carried out, focusing on passive protection systems. During the last years, a wide variety of classical systems of seismic protection have demonstrated to be an effective and practical way of reducing the seismic vulnerability of buildings, maintaining their health and structural integrity. However, with the emergence of metamaterials, which allow obtaining uncommon mechanical properties, new procedures and devices with high performance have been developed, reducing the seismic risk through novel approaches such as: seismic shields and the redirection of seismic waves; the use of stop band gaps and the construction of buried mass resonators; the design of pentamodal base isolators. These ideas are impacting traditional areas of structural engineering such as the design and building of highly efficient base isolation systems. In this work, recent advances in new seismic protection technologies and researches that integrate mechanical metamaterials are presented. A complete bibliometric analysis was carried out to identify and classify relevant authors and works related with passive seismic protection system based on mechanical metamaterial (pSPSmMMs). Finally, possible future scenarios for study and development of seismic isolators based on mechanical metamaterials are shown, identifying the relevant topics that have not yet been explored, as well as those with the greatest potential for future application.

• Journal of Sport and Applied Science
• /
• v.8 no.2
• /
• pp.1-12
• /
• 2024

Purpose: The purpose of this study is to understand fans' perception of the MLS. Particularly, this study investigates both the avid fan's perception of the MLS as well as the same perception in a potentially larger audience. This study aims at (1) segmenting the findings into three groups, (2) understanding the characteristics of these groups from the sport marketing prospective and (3) comparing the three groups to see whether there are any similarities and differences. Research design, data, and methodology: Using motivational factors alongside the 4P's of marketing, these three segments were analyzed and their similarities and differences were compared. An online survey was created and distributed through different MLS databases. Results: Prior to the distribution, a few hypotheses were made regarding the motivational factors of fans; specifically, that the quality of play has led to a lack of interest in the league and that the presence of star athletes has the potential to bring in more fans for the league. The quality of play and star athletes are important and thus a bigger emphasis needs to be placed on the designated player rule. At the same time, more television coverage as well as more exhibition games with international teams can generate more buzz for the league and garner more fans. Conclusions: This study explored motivational factors which support fanship of Major League Soccer. Further implications were discussed.

• Journal of KIISE
• /
• v.43 no.8
• /
• pp.848-856
• /
• 2016

Seeking and recognizing maritime targets are very important tasks for maritime safety. While searching for maritime targets using radar is possible, recognition is conducted without automatic identification system, radio communicator or visibility. If this recognition is not feasible, radar operator must tediously recognize maritime targets using movement features on radar base on know-how and experience. In this paper, to support the radar operator's mission of continuous observation, we propose an algorithm for automatic recognition of an unknown ship using movement features on radar and a method of detecting potential ship related accidents. We extract features from contact range, course and speed of four types of vessels and evaluate the recognition accuracy using SVM and suggest a method of detecting potential ship related accidents through the algorithm. Experimentally, the resulting recognition accuracy is found to be more than 90% and presents the possibility of detecting potential ship related accidents through the algorithm using information of MV Sewol. This method is an effective way to support operator's know-how and experience in various circumstances and assist in detecting potential ship related accidents.

• Journal of Biomedical Engineering Research
• /
• v.15 no.3
• /
• pp.237-244
• /
• 1994

We investigated the qualitive and quantitative properties in EEG signal which responds to auditory stimulus with increaing the sound-cutting frequency from 2 Hz to 20 Hz by 2 Hz step units, by chaotic dynamics. To bigin with, general chaotic properties such as fractal mechanism, 1 If frequency spectrum and positive Lyapunov exponent are discussed in EEG signal. For evoked potential with given auditory stimulus, the route to chaos by bifurcation diagram and the changes in geometrical property of Poincare sections of 2-dimensional psedophase space is observed. For that containing spontaneous potential, seen as the random background signal, the chaotic attractors in 3-dimensional phase space are found containing the same infomation as the above mentioned evoked potential. Finally the chinges of Lyapunov exponent by various sound-cutting frequencies of stimulus and by the various spatial positions (occipital region) in a brain surface to be measured, are illustrated meaningfully.

• Journal of Korean Society of Forest Science
• /
• v.102 no.1
• /
• pp.30-37
• /
• 2013

Analysis of new approaches to achieve naturally good ecological potential of forest road cut-slope by making the best use of advantages of gabion systems with vegetation base materials to prevent slope failure and erosion, in the area with highly erodible soil. Existing gabion systems can be divided into monolithic and modular system and can be divided into ten subtypes according to the purpose of establishment and combination of other measures. As a result on the monitoring of erosion amount from forest road cut-slopes in the test applications, the order of erosion amount from largest to smallest is as follows: the curved road cut-slope site where normal gabion system was established 5,840 $cm^3$; the control site 5,833 $cm^3$; the straight road cut-slope site where normal gabion system was established 5,621 $cm^3$; the curved road cut-slope site where the new gabion system was established 4,298 $cm^3$; and the straight road cut-slope site where the new gabion system 4,117 $cm^3$. Therefore, the result shows that the new gabion system is more effective than the normal gabion system to reduce erosion amount from forest road cut-slopes. During the study period, vegetation coverages of the straight and curved road cut-slope site where the new gabion system was established were about 56(30~85)% and about 45(28~65)%, so average vegetation coverage of the sites where the new gabion systems was established was higher than the sites where the normal gabion systems was established. Therefore, it was concluded that the new gabion system can be more effective for cut-slope revegetation.

• Korean Chemical Engineering Research
• /
• v.51 no.4
• /
• pp.426-431
• /
• 2013

Nanosized $TiO_2$ particles were prepared from titanium (IV) sulfate solution using base solutions at low reaction temperature ($95^{\circ}C$) and atmospheric pressure by hydrothermal precipitation method without calcination. The effects of preparation conditions, such as kind of base solutions (NaOH, $NH_4OH$, Monoethanolamine, Diethanolamine, Triethanolamine) and surfactants (CTAB, Span 20, SDBS), concentration of surfactants, temperature and pH, on the physical properties of $TiO_2$ particles have been investigated by XRD, SEM and Zeta-potential meter. Absorption area was also investigated by DRS in order to confirm the photocatalytic activity of the nanosized $TiO_2$ particles. It was turned out that, among base solutions, NaOH provides the smallest $TiO_2$ particles with excellent crystallinity. And cationic surfactant (CTAB) prepared smaller $TiO_2$ particles than any other surfactants. When CTAB is added in the concentration ratio of $Ti(SO_4)_2$:CTAB=10:1, $TiO_2$ particles with particle diameter of 5.8 nm were prepared. This is approximately 1/10 of that prepared without CTAB.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.4
• /
• pp.409-417
• /
• 2014

Since the oil price has been significantly jumped for recent some years, the diesel engine of the merchant ship has been mainly used the heavy oil of low quality. Thus, it has been often exposed to severely corrosive environment more and more because temperature of the exhaust gas in a combustion chamber is getting higher and higher with increasing of using the heavy oil of low quality. As a result, wear and corrosion of most parts surrounded with combustion chamber is more serious compared to the other parts of the engine. Therefore, an optimum weldment for these parts is very important to prolong their lifetime in a economical point of view. In this study, four types of filler metals such as Inconel 625, 718, 1.25Cr-0.5Mo and 0.5Mo were welded with SMAW and GTAW methods in the forged steel which would be generally used with piston crown material. And the corrosion properties of weld metal, heat affected zone and base metal were investigated using electrochemical methods such as measurement of corrosion potential, anodic polarization curves, cyclic voltammogram and impedance etc. in 35% H2SO4 solution. The weld metal and base metal exhibited the best and worst corrosion resistance in all cases of filler metals. In particular, the weld metal welded with filler metals of Inconel 718 revealed the best corrosion resistance among the filler metals, and Inconel 625 followed the Inconel 718. Hardness relatively indicated higher value in the weld metal compared to the base metal. Furthermore, Inconel 625 and 718 indicated higher values of hardness compared to 1.25cr-0.5Mo and 0,5Mo filler metals in the weld metal.

• The Journal of Advanced Prosthodontics
• /
• v.9 no.6
• /
• pp.453-462
• /
• 2017

PURPOSE. The purpose of this study was to investigate the in vitro cytotoxicity of thermoplastic denture base resins and to identify the possible adverse effects of these resins on oral keratinocytes in response to hot water/ food intake. MATERIALS AND METHODS. Six dental thermoplastic resin materials were evaluated: three polyamide materials (Smile tone, ST; Valplast, VP; and Luciton FRS, LF), two acrylic materials (Acrytone, AT; and Acryshot, AS), and one polypropylene resin material (Unigum, UG). One heat-polymerized acrylic resin (Vertex RS, RS) was chosen for comparison. After obtaining extracts from specimens of the denture resin materials (${\phi}=10$ mm and d=2 mm) under different extraction conditions ($37^{\circ}C$ for 24 hours, $70^{\circ}C$ for 24 hours, and $121^{\circ}C$ for 1 hour), the extracts (50%) or serial dilutions (25%, 12.5%, and 6.25%) in distilled water were co-cultured for 24 hours with immortalized human oral keratinocytes (IHOKs) or mouse fibroblasts (L929s) for the cytotoxicity assay described in ISO 10993. RESULTS. Greater than 70% viability was detected under all test conditions. Significantly lower IHOK and L929 viability was detected in the 50% extract from the VP ($70^{\circ}C$) and AT ($121^{\circ}C$) samples (P<.05), but only L929 showed reduced viability in the 50% and 25% extract from LF ($37^{\circ}C$) (P<.05). CONCLUSION. Extracts obtained from six materials under different extraction conditions ($37^{\circ}C$, $70^{\circ}C$, and $121^{\circ}C$) did not exhibit severe cytotoxicity (less than 70% viability), although their potential risk to oral mucosa at high temperatures should not be ignored.

• Journal of Digital Contents Society
• /
• v.9 no.4
• /
• pp.601-606
• /
• 2008

U-Healthcare is one of the major applications in ubiquitous sensor network. U-Healthcare has potential to become a critical service for the people who immediately require emergency ambulatory attention. This paper describes about the real time pulse monitoring and reporting system, consisting of two components: thus, the one is a reliable bio-sensor that continuously monitors the pulse information of the subject, and the other is the automatic transfer system that transmits pulse information to both his/her family and hospital care system through the Base Station. In the hospital, this bio-information can be used to treat the patient accordingly. I designed the pulse information monitored by a bio-sensor module that transfers the pulse information to both the Base Station and the central monitoring system through transmitting protocols such as Zigbee and TCP/IP, as well as designed the architecture of information packets for the corresponding protocols. Furthermore, the central monitoring system automatically parses the pulse information of the subject into the web database server, which can continuously provides the real time information and status of the subject via an internet browser to the clients who are family members of the subject and the authenticated medical care personnel as well.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.4
• /
• pp.34-42
• /
• 2008

Generally, paper multilayering was performed before wet pressing process. However, sheets whose characteristics are different could be put together at the dry state by adhesives for the specialty paper products. In this paper, potential adhesives such as PVAc, oxidised starch, latex, and PVA were chosen and multilayering of several sheets was performed in laboratory scale. The effects of base paper properties and the composition of adhesives on the physical properties of multilayering paper were investigated. Physical properties such as bonding strength and stiffness were measured. For the practical reasons, mill trial was also executed. According to the result of laboratory tests and mill trial test, the physical properties of multilayered paper were greatly affected by the composition of adhesives and it was found that PVAc showed the best performance in all its aspects among four adhesives. Oxidised starch had an advantage of high stiffness and PVA gave high bonding strength to the multilayered paper. And it was also found that the properties of base paper showed the great influences not only on multilayering process, but also on the physical properties of the multilayered paper.