• The Korean Journal of Malacology
• /
• v.5 no.1
• /
• pp.1-9
• /
• 1989

A scanning electron microscopic study on the glochidium and glchidial encystment of Anodonta grandis on the guppy was conducted. The shape of the glochidium is apparently triangular and its averge size is 0.45mm X0.4mm when closed, The two glochidial shell valves are of the same size, kept together by a ligament of 120${\mu}{\textrm}{m}$ in length and 7 ${\mu}{\textrm}{m}$ in width. Each of the glochidial shell valves has a 16 ${\mu}{\textrm}{m}$ long hook sitdded with many spines on the superior face. A large area to the apex of the valve surrounding the base of the hook is provided with numerous small spines which become progressively smaller towards the periphery of the area, The external surface of the glochidial shell valve is covered with numerous small processes showing successive change in the shape and the pattern of destribution by part. Besides the processes, there are a number of niches scattered all over the exterior surface. The glochidial shell valve has two layers. One is the outer thin membrane bearing the processes and the niches and the others is the inner layer bearing numerous holes which any accessory structure and 2.65 ${\mu}{\textrm}{m}$ in diameter, emerges from a canal located at center of ventral plate of the mamtle, A total of three types of the hair cells are observed. In present artificial infection of the glochidium to the guppy, it took about three to four hours to complete an early cysts, During the period of encystment, The epithelial cells of the host fish actively migrated toward the attached glochidium and covered it.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.1
• /
• pp.1-13
• /
• 1992

The objective of this study is to develop knowledge-based system for the preliminary design and midship section design of bulk carrier and to enhance the applicability of knowledge engineering in the field of Naval Architecture. First, expert system shell called E.1 is developed in C language. E.1 supports backward-chaining, automatic iteration procedure and reiterative inference mechanism for efficient application of knowledge-based system in structural design. Knowledge representation in E.1 includes IF-THEN rules, 'facts'and 'tables'. Second, knowledge bases for the principal particulars and midship section design are developed by experimental formula, design standard and experiential knowlege. Third, hybrid system combined this knowledge-based system with the optimization program of midship section is developed. Finally, the simplified design method utilizing the regression analysis of the optimum results of stiffened plate is developed for facilitating the design process. Using this knowledge-based system, the design process and results for Bulk carrier and stiffened plates are discussed. It is concluded that knowledge-based system is efficient for preliminary design and midship section design of the ship. It is expected that the performance of the CAD system would be enhanced if the better knowledge-base is accumulated in the E.1 tool.

• Journal of Power System Engineering
• /
• v.17 no.5
• /
• pp.78-85
• /
• 2013

A high thermal conductivity material, namely graphene is treated by planetary ball milling machine to transport the heat by increasing the temperature. Experiments were performed to assess the heat transfer enhancement benefits of coating the bottom wall of copper substrate with graphene. It is well known that the graphene is unable to disperse into base fluid without any treatment, which is due to the several reasons such as attachment of hydrophobic surface, agglomeration and impurity. To further improve the dispersibility and thermal characteristics, planetary ball milling approach is used to grind the raw samples at optimized condition. The results are examined by transmission electron microscopy, x-ray diffraction, Raman spectrometer, UV-spectrometer, thermal conductivity and thermal imager. Thermal conductivity measurements of structures are taken to support the explanation of heat transfer properties of different samples. As a result, it is found that the planetary ball milling approach is effective for improvement of both the dispersion and heat carriers of carbon based material. Indeed, the heat transfer of the ground graphene coated substrate was higher than that of the copper substrate with raw graphene.

• Korean Journal of Cleft Lip And Palate
• /
• v.11 no.1
• /
• pp.1-12
• /
• 2008

In cleft palate patient, characteristic of speech disorder is the resonance disorder result from velopharyngeal incompetence. Clinically VPI caused by congenital factor as congenital palatal incompetence, submucosal cleft palate, and caused by acquired factor as CNS damage, tumor, palatal palsy. The clinicians more concerned about the speech disorders after cleft palate surgery rather than language pathologist. The resonance disorder devided for hypernasality, hyponasality and nasal emission, but as a rule, hypernasality is typical phenomenon of the resonance disorder. Traditionally clinicians and language pathologists evaluated four-stage or five-stage of hypernasality by subjective assessment. Although language pathologist is well-trained, results of the language level should be different. In late 1980s, Kay Elemetrics Corp. developed nasometer that objective nasalance identified with well-trained language pathologist and originate from nasometer Tonar I and II were developed by Fletcher. Therefore objective nasalance test was possible, the nasometer used in hospital, collage and speech clinic both and home and abroad. Standardization of the cleft palate speech assessment must be settled without delay because of different character result in different language and different assessment results by dialect in same language. In our study, we provide the data base for the standardization of cleft palate speech assessment which through report of objective assessment method, speech therapy effects and problems result in interdisciplinary teamwork by nasometer use in treatment of cleft palate patient.

• Journal of Welding and Joining
• /
• v.32 no.1
• /
• pp.15-21
• /
• 2014

FCAW(Flux Cored Arc Welding), SAW(Submerged Arc Welding), EGW(Electro Gas Welding), and three-pole SAW are applicable in manufacturing the offshore wind tower. In this paper, mechanical properties of these welded-joints for TMCP steels were evaluated in all above welding processes. The tensile strength of welded-joints for all the welding methods satisfied the standard guideline (KS D 3515). No cracking on weldment was found after the bending test. Changes of weldedments hardness with welding processes were observed. In a weld HAZ (heat-affected zone), a softened HAZ-zone was formed with high heat input welding processes (SAW and EGW). However, the welded-joint fractures were found in the base metal for all cases and small decrease in welded-joint strength was caused by a softened zone. The multi-pole SAW welds exhibited similar mechanical properties comparing to the one with one-pole SAW process.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.29 no.1
• /
• pp.120-127
• /
• 2000

Deep-fat frying is a common cooking practice. There has been considerable concern regarding the mutagenic and carcinogenic potential of thermally oxidized oils. Studies on deep-fried foods so far have revealed not much on the mutagenicity of the oils in the foods. Therefore, in the present study, it was attempted to investigate the mutagenicity ofthe thermally oxidized safflower oil. Oil was heated in a home-fryer at a temperature of 180$\pm$3$^{\circ}C$ for 48 hours. Oil samples were taken at 0, 8, 16, 24, 32, 40 and 48 hours of heating, respectively. Each sample was used to study the changes in peroxide value (POV), acid value (AV), iodine value (IV), conjugated dienoic acid (CDA) content, %, and fatty acid composition. Another series of samples were fractionated into non-polar and polar fractions by column chromatography. The mutagenicity of the samples taken from the thermally oxidized oils, as well as the non-polar and polar fractions of the thermally oxidized oils, was investigated with the Ames test. The Ames test was carried out with and without metabolic activation. Bacterial tester strains used in the present study were the histidine auxotrophic strains of Salmonella typhimurium TA100, TA1535 and TA102 were used for the detection of base pair mutations, and TA98 and TA1537 for frame shift mutations. Each series of samples was dissolved in tetraphydrofuran (inhibitor-free) and tested at doses ranging from 0.05 to 5 mg/plate. None of the oil samples taken during the 48 hour oxidation period showed any mugagenic activity. This was the case, even after the activaton with 59 mix. Also, none of the polar and non-polar fractions showed any mutagenic activity on all the strains tested.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.11
• /
• pp.1741-1751
• /
• 2004

It is commonly requested that the steam generator tubes wall-thinned in excess of 40% should be plugged. However, the plugging criterion is known to be too conservative for some locations and types of defects and its application is limited to a single crack in spite of the fact that the occurrence of multiple through-wall cracks is more common in general. The objective of this research is to propose the optimum failure prediction models for two adjacent through-wall cracks in steam generator tubes. The conservatism of the present plugging criteria was reviewed using the existing failure prediction models for a single crack, and six new failure prediction models for multiple through-wall cracks have been introduced. Then, in order to determine the optimum ones among these new local or global failure prediction models, a series of plastic collapse tests and corresponding finite element analyses for two adjacent through-wall cracks in thin plate were carried out. Thereby, the reaction force model, plastic zone contact model and COD (Crack-Opening Displacement) base model were selected as the optimum ones for assessment of steam generator tubes with multiple through-wall cracks. The selected optimum failure prediction models, finally, were used to estimate the coalescence pressure of two adjacent through-wall cracks in steam generator tubes.

• Journal of Ginseng Research
• /
• v.42 no.3
• /
• pp.304-311
• /
• 2018

Background: Ginseng black spot disease resulting from Alternaria panax Whuetz is a common soil-borne disease, with an annual incidence rate higher than 20-30%. In this study, the bacterial strains with good antagonistic effect against A. panax are screened. Methods: A total of 285 bacterial strains isolated from ginseng rhizosphere soils were screened using the Kirby-Bauer disk diffusion method and the Oxford cup plate assay. We analyzed the antifungal spectrum of SZ-22 by confronting incubation. To evaluate the efficacy of biocontrol against ginseng black spot and for growth promotion by SZ-22, we performed pot experiments in a plastic greenhouse. Taxonomic position of SZ-22 was identified using morphology, physiological, and biochemical characteristics, 16S ribosomal DNA, and gyrB sequences. Results: SZ-22 (which was identified as Brevundimonas terrae) showed the strongest inhibition rate against A. panax, which showed 83.70% inhibition, and it also provided broad-spectrum antifungal effects. The inhibition efficacies of the SZ-22 bacterial suspension against ginseng black spot reached 82.47% inhibition, which is significantly higher than that of the 25% suspension concentrate azoxystrobin fungicide treatment (p < 0.05). Moreover, the SZ-22 bacterial suspension also caused ginseng plant growth promotion as well as root enhancement. Conclusion: Although the results of the outdoor pot-culture method were influenced by the pathogen inoculum density, the cropping history of the field site, and the weather conditions, B. terrae SZ-22 controlled ginseng black spot and promoted ginseng growth successfully. This study provides resource for the biocontrol of ginseng black spot.

• Korean Journal of Cleft Lip And Palate
• /
• v.4 no.2
• /
• pp.69-78
• /
• 2001

Alveolar cleft exists in 75% of cleft patients, In alveolar cleft patients, alar base is widening, palatal fistular formation, maxillary growth disturbance & tooth loss of adjacent area is raised, Alveolar bone grafting, especially iliac bone grafting, is a general treatment method. As operation timing, bone grafting is classified with primary, early secondary, secondary, & late secondary, Here we report cleft width, marginal bone height, bone resorption rate, grafted shape & bone densities after secondary iliac bone grafting was done in the Dept. of oral and maxillofacial surgery of chonbuk national university hospital. We compared cleft width to bone resorption rate and grafted shape. Also, alveolar bone densities of grafted and contralateral site was compared with Emago 3 package? (Oral Diagonostic System, The Netherlands), The data obtained were analyzed using Spearman's rho coefficients and sign test with SPSS for window, The results were obtained as follows. 1. As alveolar cleft width is increase, bone resorption rate is, too. This relation showed significant difference(P<.01). 2, In proximal & distal area, alvolar cleft width and bone graft contour after bone grafting had a reverse proportional difference. It was not significant difference(P>.05). 3. After 3 month, in bone density results by using Emago 3 package? with periapical standard view, occlusal view & panoramic view, differences between grafted bone and alveolar bone of contralateral site didn't show a significant difference(P>.05). Thus, differences of bone densities in the alveolar bones didn't exist.

• Korean Journal of Cleft Lip And Palate
• /
• v.11 no.2
• /
• pp.71-75
• /
• 2008

The outcome of primary surgery for cleft lip is judged by its effects on the quality of oro-facial function and development. Many surgical techniques have been tried to obtain better results, however, Delaire introduced a technique of functional closure of the lip and nose, based on the findings of no true hypoplasia in the tissues either side of the cleft. In a seven-month-old Asian male patient with unilateral incomplete cleft lip, we carried out the primary closure by modified Delaire's technique. With no alveolar bone graft, the vertical incision on the nasal base was omitted in this patient because of his acceptable symmetry of nose. Also, a small Z plasty was added on the non-cleft side. The V-shaped incisions, whose notch was located on each side of the red vermilion, were designed and beveled incisions were performed for the rehabilitation of lip length and thickness, considering the postoperative wound contracture. We assured that this modification of Delaire's technique could be applied for various cases of primary closure of incomplete cleft lip.