• Korean Journal of Cleft Lip And Palate
• /
• v.5 no.1
• /
• pp.27-42
• /
• 2002

This study was designed to evaluate the morphology and the position of the mandible in the complete unilateral cleft lip and palate patients, Craniofacial skeletal morphology pattern was analyzed on the lateral cephalometric radiographs of the 50 subjects of complete unilateral cleft lip and palate, the 50 normal and 50 class III, Each group was divided into child and adult sub-groups, All the data were tested statistically. The results were as follows: I, In the comparison with the normal group, complete cleft group showed smaller angular, condylar length, clockwisely rotated mandible and larger NMe/SGo(p<0.01). 2, In the comparison with the class III group, the complete cleft group showed significantly smaller angular, condylar, ramal, body length of the mandible(p<0,01). 3. As for the position of the mandibular condyle to the cranial base, the class III group was the most anterior, the normal group was the most posterior and the complete cleft group was in the middle(p<0.05). 4. In the comparison with child group, the normal adult group showed smaller mandibular angle and mandibular plane angle, but not the other two groups. And the complete cleft group and the class III group showed the similar change. The normal and class III group showed increased XiCd/XiPog, but not the complete cleft group(p<0.01).

• Fashion & Textile Research Journal
• /
• v.19 no.5
• /
• pp.579-588
• /
• 2017

This study investigates the wearing behavior and athleisure wear design preferences of women in their twenties as related to the design development of athleisure wear. A questionnaire survey was conducted on 185 women in their 20s. The survey was conducted from September to October 2016. Questionnaire items consisted of respondents' general items, athleisure wear and preference related items, and athleisure wear purchase related items. We collected 185 questionnaires from participants; subsequently, 169 were used as analytical data (except for incomplete questionnaires). The results of the study are as follows. Fit and wear comfort was the most important factor in the selection of athleisure wear. As a result of investigating the popularity of the athletic wear brand, the preference for the total sportswear brand was higher than the professional athletic wear brand. When the preferred colors were examined, the achromatic colors were ranked higher than chromatic colors. An examination of the preferred designs according to items indicated that the bra top preferred the 'U' shaped front plate and the 'Y' base basic type; in addition, T-shirts with the round neckline and the 1/4 length sleeves were preferred as tops. Leggings preferred long length type. It is necessary to develop a brand that matches the preference of the twenties' consumers by adjusting the aged target that can avoid the overheated competition and develop a niche market.

• Journal of Korean Society of Steel Construction
• /
• v.29 no.6
• /
• pp.455-465
• /
• 2017

To figure out the weldability and welded joint performance on the FCAW of SM490TMC 120mm, several specimens were manufactured and 10 kinds of experiments were implemented. The result of the weld zone chemical composition test, weld metal tensile test, weld zone tensile test, and weld zone impact test has satisfied the KS. Especially, the weld zone tensile test result shows the base metal fracture, which means the weld zone performs enough required performance. In addition, the results of the weld zone bending test, hardness test, macroscopic test, microscopic test, and the maximum hardness in HAZ were showing that the FCAW weld zone has fine quality.

• Tribology and Lubricants
• /
• v.24 no.4
• /
• pp.190-195
• /
• 2008

Many researchers have tried to improve the tribological characteristics of lubricant by adding various nano particles in the base lubricant. But the reliability evaluation of the lubricants are rarely performed in its real operation condition. In this study, the physical property and the tribological characteristics of the graphite nano lubricant were evaluated and compared with raw lubricant after thermal degrading. In order to evaluate the tirbological characteristics, the disk-on-disk tribotester was adopted to measure the friction coefficient of the graphite nano lubricants. Also the temperature variations of friction surfaces were measured by the thermocouple installed on the fixed plate in the test chamber of the tribotester. The kinematic viscosity was measured using a capillary viscometer on the temperatures of 40, 60 and $80^{\circ}C$. The results showed that the graphite nano lubricant had lower friction coefficient and less wear on the friction surfaces than raw lubricant. After thermally degrading, the friction coefficients of graphite nano lubricant increased, but the friction coefficients after thermal degradation were still maintained lower than those of raw lubricant.

• Journal of Microbiology and Biotechnology
• /
• v.25 no.9
• /
• pp.1449-1459
• /
• 2015

A novel proteolytic enzyme with fibrinolytic activity, FSP3, was purified from the recently isolated Streptomyces sp. P3, which is a novel bacterial strain isolated from soil. FSP3 was purified to electrophoretic homogeneity by ammonium sulfate precipitation, anion exchange, and gel filtration. FSP3 is considered to be a single peptide chain with a molecular mass of 44 kDa. The maximum activity of the enzyme was observed at 50℃ and pH 6.5, and the enzyme was stable between pH 6 and 8 and below 40℃. In a fibrin plate assay, FSP3 showed more potent fibrinolytic activity than urokinase, which is a clinical thrombolytic agent acting as a plasminogen activitor. The activity was strongly inhibited by the serine protease inhibitor PMSF, indicating that it is a serine protease. Additionally, metal ions showed different effects on the activity. It was significantly suppressed by Mg²⁺ and Ca²⁺ and completely inhibited by Cu²⁺, but slightly enhanced by Fe²⁺. According to LC-MS/MS results, its partial amino acid sequences are significantly dissimilar from those of previously reported fibrinolytic enzymes. The sequence of a DNA fragment encoding FSP3 contained an open reading frame of 1287 base pairs encoding 428 amino acids. FSP3 is a bifunctional enzyme in nature. It hydrolyzes the fibrin directly and activates plasminogen, which may reduce the occurrence of side effects. These results suggest that FSP3 is a novel serine protease with potential applications in thrombolytic therapy.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.620-625
• /
• 2002

Considering the fuel consumption of car, a light structure of aluminum alloys is desired for car body nowadays. However, fusion welding of aluminum alloys has some problems of reduction of joint efficiency, porosity formation and hot cracking. ill the present work, investigation to improve the joint performance of laser welded joint has been carried out by addition of Cu, Ni, and Zr to A6N01 alloy welds. Aluminum alloy plate of 2.0mm in thickness with filler metal bar was welded by twin beam Nd:YAG laser facility (total power:5kW). The filler metals were prepared by changing the chemical compositions for adding the elements into the weld metal. Thirteen filler metal bars were prepared and pre-placed into the base metal before welding. Ar gas shielding with a flow rate of 10 l/min was used. The defocusing distance is kept at 0 mm. At travel speeds of 3 to 9 m/min and at laser power of 5kW (front beam 2kW rear beam 3kW), full penetration welds were obtained, whereas at travel speeds of 12 to 18 m/min and same power, partial penetration was observed. The joint efficiency of laser-welded joint was improved by the addition of Cu, Ni, and Zr due to the solid solution hardening, grain refining and precipitation hardening. The type of hardening has been further considered by metallurgical examination.

• Journal of Welding and Joining
• /
• v.28 no.6
• /
• pp.63-69
• /
• 2010

The pre-heat free consumables for GMAW, SAW and FCAW processes that matche with the Cu-bearing PFS-700 steel which has yield strength over 700MPa were developed and evaluated to see the suitability in military such as submarine and battle ship. Explosion Bulge Test underwater was developed and applied to see the reliability of welded structure. All welding was conducted without pre-heat before welding, the interpass temperature was below $150^{\circ}C$ for all welding conditions. Tensile strength for the weld metal in GMAW, SAW and FCAW process is 887MPa, 875MPa and 813MPa, respectively, these values are similar to the base metal of PFS-700 steel of 838MPa. EBT results in GMAW, SAW and FCAW show 14.0%, 14.02% and 15.9% reduction of thickness without generation of crack, respectively and stand-off distance was set up properly to have over 14.0% reduction of thickness. Through EBT results, the developed new consumables are applicable to the weapon systems such as submarine and battle ship.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2290-2295
• /
• 2005

In this paper, it is developed simulator system of 3 D.O.F parallel robot for educate of expertness. This simulator system is composed of three parts ? 3 D.O.F parallel robot, controller (hardware) and software. First, basic structure of the robot is 3 active rotary actuator that small geared step motor with fixed base. An input-link is connected to this actuator, and this input-link can connect two ball joints. Thus, two couplers can be connected to the input-link as a pair. An end-plate, which is jointed by a ball joint, can be connected to the opposite side of the coupler. A sub-link is produced and installed to the internal spring, and then this sub-link is connected to the upper and bottom side of the coupler in order to prevent a certain bending or deformation of the two couplers. The robot has the maximum diameter of 230 mm, 10 kg of weight (include the table), and maximum height of 300 mm. Hardware for control of the robot is composed of computer, micro controller, pulse generator, and motor driver. The PC used in the controller sends commands to the controller, and transform signals input by the user to the coordinate value of the robot by substituting it into equations of kinematics and inverse kinematics. A controller transfer the coordinate value calculated in the PC to a pulse generator by transforming it into signals. A pulse generator analyzes commands, which include the information received from the micro controller. A motor driver transfer the pulse received from the pulse generator to a step motor, and protects against the over-load of the motor Finally, software is a learning purposed control program, which presents the principle of a robot operation and actual implementation. The benefit of this program is that easy for a novice to use. Developed robot simulator system can be practically applied to understand the principle of parallel mechanism, motors, sensor, and various other parts.

• Journal of the Korean Geographical Society
• /
• v.45 no.3
• /
• pp.414-429
• /
• 2010

With regard to Ieodo, South Korea and China argue that Ieodo belongs to their territory respectively, considering its history. However, both parties haven't suggested concrete evidence to support their argument. Even if they suggest corroborative facts, they are distorted or exaggerated like myth. Therefore, it is important by what side primitive title and effective control are exercised in settling the problem of Ieodo. The issue was to suggest coherence logic by finding concrete geographical facts in the East China Seat the time of applying a method of boundary decision followed by the marine act, namely principle of median line and principle of equidistance. China has argued that China should occupy most of continental shelf in the East China Sea on the basis of silt, a deposit of the continent. However, the base of the East China Sea is a part of Eurasian Plate. In addition, a geographical contribution to formation of the continent shelf by the Korean Peninsula is equal to the Chinese Continent. Ieodo is 'Island of mythos' in China, but is 'Island of legend' suggested by concrete facts in South Korea. Therefore, its cultural titile and primitive title are belonged to South Korea, before its historical title.

• Korean Journal of Ichthyology
• /
• v.23 no.1
• /
• pp.80-84
• /
• 2011

Redescription of the Hawaiian ladyfish Elops hawaiensis was carried out based on four specimens collected from Busan and Gwangyang between 2008 and 2010. This species has a gular plate between the symphysis and isthmus, and the entire premaxillary tooth band is exposed when the mouth is closed. Our Korean specimens of E. hawaiensis are characterized by having 65~67 vertebrae, 14 anal fin rays and 95~101 lateral line scales, which values differed slightly from those given in previous studies. Molecular analysis using 4S0 base pairs of mitochondrial DNA cytochrome b sequences showed that our four specimens corresponded well with E. hawaiensis (99.8~100.0%). Therefore, our results suggest that there may exist regional differences in vertebrae and anal fin ray counts for E. hawaiensis.