• 해양환경안전학회지
• /
• 제20권3호
• /
• pp.304-311
• /
• 2014

In this study, to apply hydrogen energy to ship engine and to generate effective hydrogen production, we investigated the effects of high temperature $H_2SO_4$ feed rate and cooling water rate to pump parts with fixed frequency needed to reciprocate motion and a simulation was conducted at each condition. In the fixed frequency and cooling water inlet flow rate of 0.5 Hz and 3.9 kg/s, we changed the high temperature $H_2SO_4$ flow rate to 47.46 kg/s (it is 105 % of 45.2 kg/s), 49.72 kg/s (110 %), and 51.98 kg/s (115 %). Also, at 0.5 Hz and 45.2 kg/s of frequency and high temperature $H_2SO_4$ flow, the thermal hydraulic analysis was performed at the condition of 95 % (3.705 kg/s), 90 % (3.51 kg/s), and 85 % (3.315 kg/s). In overall simulation cases, the physical properties of materials are more influential to the temperature increase in the pump part rather than the changes on the feed rate of high temperature $H_2SO_4$ and cooling water. A continuous operation of pump was also capable even if the excess feed of high temperature $H_2SO_4$ of about 15 % or the less feed of cooling water of about 15 % were performed, respectively. When the increasing feed of high temperature $H_2SO_4$ of up to 5 %, 10 %, and 15 % were compared with base flow (45.2 kg/s), the deviation of time period rose to a certain temperature and ranged from 0 to 4.5 s in the same position (same material). In case of cooling water, the deviation of time period rose to a certain temperature and ranged from 0 to 5.9 s according to the decreasing feed changes of cooling water at 5 %, 10 %, and 15 % compared to a base flow (3.9 kg/s). Finally, the additional researches related to the two different materials (Teflon and STS for Pitch and End-plate), which are concerned about the effects of temperature changes to the parts contacting different materials, are needed, and we have a plan to conduct a follow-up study.

• 대한환경공학회지
• /
• 제28권10호
• /
• pp.1009-1015
• /
• 2006

정수 슬러지의 감량화와 탈수장치의 성능향상을 위하여 필터프레스 탈수장치의 각 Plate 사이에 음극판과 양극판을 설치하여 케이크 층에 전기장을 투입하는 전기식 필터프레스 탈수장치(EDFP)를 구축하여 기존의 기계식 필터프레스 탈수장치(MDEF)와의 탈수성 비교, 그리고 EDFP의 탈수성 향상에 따른 경제적인 측면 등을 분석하였다. 동일조건에서 탈수실험을 수행한 결과 EDFP를 통해 배출된 여액량은 43.2 kg으로 MDFP에 비하여 증가하였으며, 케이크 무게는 4 kg으로 MDFP에 비해 2배 증가하였고 탈수 케이크의 함수율은 55 wt%로 MDFP에 비하여 약 20% 감소하였으며 탈수속도는 2.3 $kg/m^2{\cdot}cycle$로 약 30% 증가하였다. 즉 전기탈수(Electrodewatering)의 원리로 구축된 EDFP는 기계탈수(Mechanical Dewatering)에 의한 MDFP 비하여 여액배출량을 증가시키고 저함수율 탈수 케이크를 생산하며 탈수속도를 증가시키는 특성이 있다. EDFP의 소모된 전력량은 400 kwh/DS ton으로, 투입된 전력량과 저함수율 탈수 케이크 생산에 따른 부피 감소로 인한 처리경비 저하의 효과를 서로 고려하여 경제성을 분석한 결과 1 ton(Dry Solid base) 처리하는데 약 20,000원 경제적 절감 효과가 있었다. 이 외 탈수속도가 빨라진 부가적 이점을 감안하면, EDFP는 탈수 성능 면에서 우수할 뿐만 아니라 경제적 타당성이 있는 장치로 평가할 수 있다.

• 대한기계학회논문집B
• /
• 제35권8호
• /
• pp.855-860
• /
• 2011

용존공기부상조의 파일럿실험장치 설계를 위한 사전 검증 작업으로서 부상조의 유동을 이차원 이상유동으로 가정하여 수치적으로 모사하였다. 형상이 변경된 다양한 부상조와 기준부상조와의 간접적인 성능 비교를 위하여 분리조에서의 하강속도를 비교하였다. 해석 결과 기준부상조의 분리조에서는 잘 설계된 High-rate DAF 의 전형적인 유동 패턴이 관찰되었다. 이러한 유동패턴은 Baffle 각도나 접촉조의 폭과 같은 다른 형상 변수와 상관없이 Baffle 이 충분히 높을 때 잘 유지되었다. 그러나 Baffle 높이 및 각도, 접촉조의 폭 및 다공판의 설치유무는 분리조에서 하강속도의 균일성에 영향을 미쳤다. 기준부상조에서 Baffle의 높이를 제외한 다른 형상을 변화시키지 않았을 때, 분리조에서의 하강속도가 균일한 것으로 나타났다. 이것은 기준부상조의 형상최적화가 잘 되어있음을 의미한다.

• 한국식품과학회지
• /
• 제32권6호
• /
• pp.1213-1220
• /
• 2000

가열산화된 유지의 산패도와 돌연변이원성과의 관련성을 알아보고자 대두유를 $180{\pm}3^{\circ}C$에서 48시간 동안 가열산화시키면서 0, 8, 16, 24, 32, 40, 48시간 후의 유지시료와 여기서 분획한 산화물 및 비산화물을 대상으로 Salmonella typimurium 변이균주 중 구조이동형(frame shift) 변이균주인 TA98, TA1537과 염기치환형(base-pair substituent) 변이균주인 TA100, TA1535 및 TA102를 사용하여 Ames test를 수행한 결과는 다음과 같다. $180{\pm}3^{\circ}C$에서 48시간 가열산화된 대두유의 가열시간에 따른 돌연변이원성을 조사했을 때 직접법 [-S9] 및 대사활성화법 [+S9] 모두에서 돌연변이원성이 인정되지 않았다. 또한 $180{\pm}3^{\circ}C$에서 가열산화된 대두유를 산화물 및 비산화물로 분리하여 돌연변이원성을 조사한 결과 가열 16시간 및 24시간 후의 산화 물질에서 돌연변이 활성이 나타났다.

• 지구물리
• /
• 제9권3호
• /
• pp.189-197
• /
• 2006

The Korea Plateau is a continental fragment rifted and partially segmented from the Korean Peninsulaat the initial stage of the opening of the East Sea (Japan Sea). We interpreted marine seismic profiles from the South Korea Plateau in conjunction with swath bathymetric to investigate processes of con-tjnental rifting and separation of the southwestern Japan Arc. The SouU-i Korea Plateau preserves funda-mental elements of rift architecture comprising a seaward succession of a rift basin and an uplifted rift flank passing into the slope, typical of a passive continental margin. Two distinguished rift basins (Onnuri and Bandal Basins) in the South Korea Plateau are bounded by major synthetic and smaller antithetic faults, creating wide and symmetric profiles. The large-offset border fault zones of these basins have convex dip slopes and demonstrate a zig-zag arrangement along strike. Rifting was primarily controlled by normal faulting resulting from extension orthogonal to the inferred line of breakup along the base ofthe slope rather U-ian strike-slip deformation. Two extension direcdons for rifdng are recog-nized; U-ie Onnuri Basin was rifted in U-ie EW direction; U-ie Bandal Basin in U-ie EW and NW-SE directions, suggesting two rift stages. We interpret that the E-W direction represents initial rifting at the inner margin; while the Japan Basin widened, rifting propagated repeatedly from the Japan Basin to the southeast toward the Korean margin but could not penetrate the strong continental lithosphere of the Korean Shield and changed direction to the south, resulting in E-W extension to create the rift basins at the Korean margin. The Hupo Basin to the south of the Korea Plateau is estimated to have formed in this process. The NW-SE direction probably represents the direction of rifting orthogonal to the inferred line of breakup along the base of the slope of the South Korea Plateau; after breakup the southwestern Japan Arc separated in the SE direction, indicating a response to tensional tectonics associated with the subduction of the Pacific Plate in the NE direction. We suggest that structural evolution of the eastern Korean margin can be explained by the processes occurring at the passive continental margin.

• 대한치과교정학회지
• /
• 제17권2호
• /
• pp.185-200
• /
• 1987

This paper was undertaken to observe the displacement of craniofacial complex with cervical headgear and to compare narrowing or widening effect of palate by use of contraction or expansion face-bow, respectively. The 3-dimensional finite element method(FEM) was used for a mathematical model composed of 597 nodes and 790 elements and an electrical resistance strain gauge investigation was performed to validate the finite element model. The outer bow of cervical headgear was adjusted to be placed below the occlusal plane by $25^{\circ}$ and met the midsagittal plane by $40^{\circ}$, and was loaded 1kg on each right and left hook toward posterior direction. The results were as follows 1. Generally, the maxillary teeth and facial bone were displaced in posterior, medial and downward direction. 2. It was the maxillary 2nd bicuspid that moved bodily. 3. The craniofacial complex rotated in a clockwise direction around the rotating axis which lay from the most posterior and lowest point connecting nasal crest of maxillary bone and vomer, progressively toward a more posterior, lateral and upward direction, anterior and upper area of pterygomaxillary fissure, base of medial pterygoid plate and laterally to the contact area of zygomatic arch with squamous part of temporal bone. 4. No contraction effect was observed by contraction face-bow when compared to the standard face-bow. 5. In case of expansion face-bow, the areas of maxillary 2nd bicuspid, molars and palate were expanded remarkably.

• 대한치과교정학회지
• /
• 제35권3호
• /
• pp.238-249
• /
• 2005

악골부조화가 심할수록 기능향상을 위해 악골 및 치아 치조부에서의 보상반응이 현저해진다. 대표적인 현상으로 하악과두의 변위와 상악교합평면의 변화 등을 들 수 있다. 이러한 상하악골에서의 적응성 변화는 안모의 심미성과 교합의 기능 향상을 위해, 술후 안정성을 높이기 위해서 악교정수술을 통해 반드시 수정해야 할 요소이다 적절한 상악골 수술을 위해서 통상적으로 model surgery를 시행하여 왔으나 이의 단점을 보완하기 위해 Surgical Jaw Relator를 고안하였으며 이는 교합기의 mounting plate 대신에 부착함으로써 상하악 모형의 삼차원적 이동과 회전이 가능하도록 설계되어 있으며 기존의 모든 종류(Panadent. Sam, Denar, Hanau 등)의 교합기에 손쉽게 부착하여 수술용 스프린트의 제작 시간을 대폭 줄일 수 있는 장점이 있다 상악골 상방 이동이 필요한 하악전돌 증례와 상악골 하방 이동이 요구되는 하악후퇴 증례 등에 본 기구를 적용한 결과 양호한 수술 결과를 얻었으며, 이로써 정교한 상악 수술을 요하거나 명확한 수술 계획이 설정된 증례 등에서 본 기구를 적절하게 사용할 경우 수술용 스프린트를 효율적으로 제작하는데 다소 도움이 될 것으로 생각된다.

• 동력기계공학회지
• /
• 제13권6호
• /
• pp.95-101
• /
• 2009

The generator for gas turbine power generation consists of the rotor which generates magnetic field, the winding coil which is the path for the field current and the wedge and retaining ring which prevents the radial movement of the coil. Relatively severe deformation was observed at the coil end section during the inspection of the generator for peaking-load operation, and the thermal-electricity and the centrifugal force were evaluated by the simple modeling of the windings to find the cause. But the simulation stress was not sufficient to induce the coil plastic deformation. The analysis result seems to be applicable to the base-load generators which runs continuously without shut down up to a year, but there had been more deformation than simulated for the generator which is started up and shut down frequently. The cause of the coil deformation was the restriction of the expansion and shrinkage. The restriction occurs when the winding coil shrinks, and the stress overwhelms the yield stress and cause the plastic deformation. The deformation is accumulated during the start-ups and shut-downs and the thermal growth occurs. The factors which induce the coil restriction during the expansion and shrinkage should be reduced to prevent the unallowable deformation. The resolutions are cutting off the field current earlier during the generator shut-down, modifying the coil end section to remove the stress concentration and making the insulation plate inserted between the coil end section and the retaining ring have the constant thickness.

• Journal of Microbiology and Biotechnology
• /
• 제10권6호
• /
• pp.764-769
• /
• 2000

The lipase gene(lip) from Bacillus stearothermophilus was recombined in vitro by utilizing the DNA shuffling technique. After four rounds of shuffling, transformation, and screening based on the initial rate of clear zone formation on a tricaprylin plate, a clone (M10) was isolated, the cell extract of which showed about 2.8-fold increased lipase activity. The DNA sequence of the mutant lipase gene (m10) showed 3 base changes, resulting in two cryptic mutations and one amino acid substitution: S113($AGC{\rightarrow}AGT$), L252 ($TTG{\rightarrow}TTA$), and G275E ($GGA{\rightarrow}GAA$). SDS-PAGE analysis revealed that the increased enzyme activity observed in M10 was partly caused by high expression of the m10 lipase gene. The amount of the expressed G275E lipase was estimated to comprise as much as 41% of the total soluble proteins of the cell. The maximum velocity ($V_{max}$) of the purified mutant enzyme for the hydrolysis of olive oil was measured to be 3,200 U/mg, which was 10% higher than that of the parental (WT) lipase (2,900 U/mg). Its optimum temperature for the hydrolysis of olive oil was $68^{\circ}C$ and it showed a typical $Ca^{2+}$-dependent thermostability, properties fo which were the same as those of the WT lipase. However, the mutant enzyme exhibited a high enantiospecificity towards (S)-naproxen compared with the WT lipase. In addition, it showed increased hydrolytic activity towards triolein, tricaprin, tricaprylin, and tricaproin.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제33권2호
• /
• pp.180-184
• /
• 2011

The mucocele is a mucus extravasation cyst arising from the salivary gland. Although it is a common?lesion of the minor salivary gland, it is uncommon when it originated from the submandibular gland. The ranula is a form of mucocele which specifically occurs in the floor of the mouth and the sublingual gland is generally accepted as the origin of ranula. They can be classified into two types based on extent: simple ranula are confined to the sublingual space and plunging ranula extend into the adjacent space. It is difficult to differentiate the submandibular gland mucocele from the plunging ranula because both of them can occupy the submandibular space. A 37-year old male visited our clinic with the chief complaint of left facial swelling. The patient's history revealed that he had suffered from a cystic lesion on the left side of the floor of the mouth 10 months previously. He supposed the cystic lesion had come from trauma at other dental clinics. Using CT and MRI, we diagnosed a simple ranula on the sublingual space and a submandibular gland mucocele. We then excised the mucocele with the submandibular gland by an extraoral approach and the sublingual gland by an intraoral approach under general anesthesia. We report a rare case of an enormous submandibular gland mucocele which extended into the pterygoid plate and parapharyngeal space with good surgical results.