• 한국산학기술학회논문지
• /
• 제20권4호
• /
• pp.264-274
• /
• 2019

본 연구는 선호하는 식물성 Base oil에 따른 클렌징 오일이 피부에 미치는 영향에 대해 알아보고자 하였다. 먼저 설문조사(100명)를 통해 세안 습관 실태 및 선호하는 식물성 Base oil를 파악하고, 이를 바탕으로 4종의 클렌징 오일을 제조하여 실험을 진행하였다. 실험은 20~30대 성인여성 10명을 대상으로 선정하여 실험 전 후 수분보유량, 유분보유량, 경피수분손실량(TEWL)을 측정하였고, 실험 후 만족도 설문조사를 실시하여 분석하였다. 그 결과, 클렌징 오일의 식물성 Base oil 종류에 따른 선호도 설문조사에서는 로즈힙 오일, 올리브 오일, 살구씨 오일, 동백 오일 순으로 나타났다. 임상 실험결과, 선호하는 식물성 Base oil에 따른 클렌징 오일(4종)의 클렌징 전 후 수분보유량과 유분보유량의 변화폭은 Base oil에 따라 차이는 있었으나 모두 증가하는 것으로 나타났다(p<0.001, p<0.001). 또한 TEWL의 변화량도 Base oil에 따라 차이는 있었으나 모두 감소하였다(p<0.01). 실험 후 주관적 만족도 설문조사 결과에서는 로즈힙 오일이 함유된 클렌징 오일(RHC)이 세정력 및 주관적인 만족도면에서 가장 높게 나타났다. 결론적으로 선호하는 식물성 Base oil에 따른 클렌징 오일이 피부의 유 수분보유량과 TEWL의 개선에 긍정적인 영향을 미쳐 피부장벽을 보호함으로서 피부개선 효과가 있음을 알 수 있었다. 따라서 개개인마다 피부타입과 선호하는 오일 및 사용감에 따른 만족도는 다르지만 본 연구의 식물성 Base oil에 따른 클렌징 오일은 단순히 세정의 차원을 넘어 피부건조와 피부장벽을 보호하는 피부보호 제품으로서 도움이 될 수 있을 것이다.

• Tribology and Lubricants
• /
• 제31권1호
• /
• pp.28-34
• /
• 2015

This paper addresses the problems of using anti-freeze lubricants for different machines that must function at extremely low temperatures during winter operation in the Republic of Sakha (Yakutia). We discuss the possibility of obtaining anti-freeze base oils from Talakan crude oil, an area with major oil and gas deposits of the Republic of Sakha, and also provide the trade and technological classification of Talakan crude oil. We propose two different schemes for processing Talakan crude oil: the fuel scheme (obtaining light and heavy fractions as a fuel oil) and the base oil scheme (obtaining light fractions and base oils). We investigate the influence of pour point depressants on alkyl-methacrylate base on the low-temperature properties of the fractions obtained from Talakan crude oil and Korean base oils, and establish the optimal concentration of pour point depressants. We compare the properties of these fractions with the low-temperature properties of Korean base oils and find that the commercial oil "Ravenol 0W-40" provides optimistic results. We obtain oil with a pour point of minus $50^{\circ}C$ and a viscosity index greater than 100. The Design of Experiment was used to establish the optimum composition of the pour point depressants and the base oil S-8 to obtain lubricant oil with a kinematic viscosity of 17 cSt, viscosity index of 208, and a pour point of minus $64^{\circ}C$.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1998년도 제28회 추계학술대회
• /
• pp.181-189
• /
• 1998

In order to investigate the effect of base oil composition on the electronic insulating oil's performances, an experimental study has been conducted using different oils. Owing to their properties, like lower pour point and gas absorbing, naphthenic base oils are used more often than paraffmic base oils for the electronic insulating oil application. Naphthenic and paraffinic base oils are significantly different in their aromatic hydrocarbon content. In this paper, PXE(para xylyl ethane), LAB(linear alkylbenzene), C13 aromatic hydrocarbon mixture and C17 aromatic hydrocarbon mixture are investigated regarding their influence on insulating oil's performances. According to present study, breakdown voltage decreased with increasing aromatic lydrocarbon content in a deep dewaxed paraffmic base oil. However, any changing in the dissipation factor was not recognizable at small treated level. Furthermore, the volume resistance was not influenced by aromatic hydrocarbon content. The gassing tendency was found as a highly sensible property, changing with treating aromatic hydrocarbons. The higher benzene ring content in the hydrocarbon, the better gassing tendency.

• KSTLE International Journal
• /
• 제3권1호
• /
• pp.26-29
• /
• 2002

The International Lubricant Standardization and Approval Committee (ILSAC) GF-3 passenger car engine oil specification has been introduced commercially in July 2001. The new specification oil provides superior performance in terms of fuel economy, control of high temperature deposits, and oil consumption. These enhanced performances of GF-3 engine oil need high quality base oil as well as a better additive system. In this paper, the effect of base oil on various performances of ILSAC GF-3 engine oil was investigated. From the GF-3 sequence engine tests, Group III base oil shows better performance in fuel economy retention, oxidation and varnish control than combination of group III and group II or group III and group 1.

• 한국식생활문화학회지
• /
• 제19권1호
• /
• pp.61-69
• /
• 2004

The shelf-life of Yugwa(Busuge) is very short because of the low oxidative stability of soybean oil which is conventionally used as the frying oil of Yugwa base with high porous structures. To identify the possibility of replacing soybean oil with palm oil whose oxidative stability is high, POV(peroxide value), AV(acid value), colorness (L. a and b), hardness and sensory characteristics during storage of the Yugwa base fried with the soybean oil and palm oil stored in the anaerobic packaging or the aerobic packaging at 10 and $30^{\circ}C$ for 75 days were measured. POV and AV of the Yugwa base fried with palm oil were significantly lower than those of Yugwa fried with the soybean oil. Hardness and colorness were not different each other and, sensory evaluation was slightly higher than that fried with soybean oil. Lipid absorption amount was not significantly different between the Yugwa base fried with palm oil and the one fried with soybean oil.

• Tribology and Lubricants
• /
• 제17권2호
• /
• pp.146-152
• /
• 2001

Environmentally adapted synthetic base oils of polyalkylene glycols (PAGs) and polyol esters (POEs) show a high polarity because of their functional groups containing oxygen atom. The lubricating performance of these polar base oils was investigated by using a four-ball tribometer under boundary lubrication condition. Four polyalkylene glycols and five polyol ester base oils were used as sample base oils of high polarity. A mineral oil (MO) and alkylnaphthalene (AN) were used as low polarity base oils. Tricrecylphosphate (TCP) was added to all the base oils, in the range of 10 mmol/L-2000 mmol/L, as an antiwear additive. All the TCP-for-mutated base oils showed optimum concentration characteristics for minimizing wear. The order of optimum concentration of all the base oils was in a good accordance with the order of relative stability of TCP in base oils. The interaction model on solvation between additive and different polar base oils can expect the stability order of TCP. Thus, the model on solvation can explain well the order of optimum concentration of all the base oils, by using the effect of polarity (dielectric constant, $\varepsilon$) and molecular size (molecular weight, MW) of them on stability of TCP in polar base oils. Finally, a good correlation of the optimum concentration for all the base oils was obtained when it was arranged as a function of C∝(M $W_{Base Oil}$/M $W_{TCP}$)$^{-2}$.71/.($\varepsilon$$_{Base Oil}$)$^{3.38}$ by these two parameters.s..

• Tribology and Lubricants
• /
• 제20권1호
• /
• pp.33-40
• /
• 2004

This study represents the newly advanced formulation of hydraulic fluids for extended drain interval and introduces the performance results of used oil samples from various excavators. The used oil samples, in this paper, show that there is a sharp change in viscosity drop and moderate additive depletion when viscosity index of hydraulic oil is very high. For the extension of hydraulic fluid life, it is necessary to improve the stability of viscosity and oxidation. New target properties from the used oil analysis were proposed for extended life. Performance of newly developed hydraulic oil based on used oil analysis is compared with previously used one. The properties of new formulation are the viscosity index of 140 and improved thermal stability consists of VHVI base oil. Field test results showed the possibility of extension of fluid life. Additionally, for development of high performance product, new required propertied and performances were discussed.

• 한국식품조리과학회지
• /
• 제19권6호
• /
• pp.729-736
• /
• 2003

This study was performed to improve the quality and extend the shelf life of Yukwa and Salyeotgangjung, traditional Korean cookies, by using fine hot salt instead of oil as the popping medium. Yukwa and Salyeotgangjung were popped with fine salt, and the size, sensory evaluation, color values and textural properties were then compared with those popped in oil. The results showed that the Yukwa base with salt was popped the most at 140C and the rice was popped at 240C. The Yukwa base in salts was smaller in size and larger in density than in oil but the popped rice in salts had a similar size and a smaller density than that popped in oil. In the sensory test, the Yukwa base and popped rice expanded in the salts were preferred to those popped in oil but there was little difference in only popped rice. In terms of color, there was a difference between those popped in salt and in oil. In terms of texture, only popped rice expanded in the salts was harder than in oil, and the Yukwa popped in oil was more cohesive than in the salts. In brittleness, there were no differences between in salt and in oil.

• 아태비즈니스연구
• /
• 제11권3호
• /
• pp.243-260
• /
• 2020

Purpose - This paper aims to investigate the properties of crude oil based derivative security (DLS) focusing on step-down type for comprehensive understanding of its risk. Design/methodology/approach - Kernel estimation is conducted to figure out statistical feature of the process of oil price. We simulate oil price paths based on kernel estimation results and derive probabilities of hitting the barrier and early redemption. Findings - The amount of issuance for crude oil based DLS is relatively low when base prices are below $40 while it is high when base prices are around $60 or $100, which is not consistent with kernel estimation results showing that oil futures prices tend to revert toward $46.14 and the mean-reverting speed is faster as oil price is lower. The analysis based on simulated oil price paths reveals that probability of early redemption is below 50% for DLS with high base prices and the ratio of the probability of early redemption to the probability of hitting barrier is remarkably low compared to the case for DLS with low base prices, as the chance of early redemption is deferred. Research implications or Originality - Empirical results imply that the level of the base price is a crucial factor of the risk for DLS, thus introducing a time-varying knock-in barrier, which is similar to adjust the base price, merits consideration to enhance protection for DLS investors.

• KSTLE International Journal
• /
• 제3권1호
• /
• pp.30-37
• /
• 2002

There have been significant improvements in base oil quality in order to satisfy recent market needs. In particular requirements of passenger car motor oils have been leading the trend. Now, high quality base oils such as VHVI base oils and PAOs are to be formulated in order to meet the tight volatility specifications. The severe hydrocracking, hydro-isomerized dewaxing and hydro-finishing process with noble-metal based catalysts (named UCO lube process) developed by SK corporation has been introduced as one of economic hydroprocessing routes to produce high quality VHVI base oils and food grade white mineral oils from fuels hydrocracker residue. Product quality of UCO lube process is similar to PAO in. general performances and therefore provides satisfactory performance far all straightforward applications in general lubricants. However, when applied to specialty lubricants like transformer oils, spray oils and coning oils, severely hydrocracked base oils are known to have various compatibility problems with gas or surfactants formulated in them. These problems are related to the difference in their composition; inherent high paraffin contents and lack of dissolving ability, Fortunately, it was found that excellent specialty lubricants could be made by carefully selecting and formulating adequate additives and/or aromatic compounds. Moreover, these specialties with high quality VHVI base oils ofter various advantages over conventional base oil based products.