• 제목/요약/키워드: Base Height

검색결과 666건 처리시간 0.026초

격강구(隔薑灸)의 연소(燃燒) 특성(特性)에 관한 실험적(實驗的) 연구(硏究) (Experimental Study on the Characteristics of Combustion in the Indirect Moxibustion with Ginger)

  • 이건목;이건휘;문성재;황병천;국우석;장지연;김양중;장재호;윤주영
    • Journal of Acupuncture Research
    • /
    • 제21권3호
    • /
    • pp.193-214
    • /
    • 2004
  • Objective : The purpose of this study is to investigate the mechanism and effect of moxibustion with ginger objectively, to be used as the quantitative data through the measurement of temperature, and to grasp the thermodynamic characteristics of moxibustion with ginger. Methods : We have selected the indirect moxibustion with ginger among many indirect moxibustions. We produced a slice of ginger to a thickness of 3, 4, 5mm and the moxa cone having a diameter of 8mm, a height of 10mm for making a comparative study of characteristics of moxa cone according to change the density. We have made a comparative study of the thermodynamic characteristics of moxibustion with ginger with or without holes. We measured combustion times and calculated temperatures, temperature gradients in each period during a combustion of moxa. Results : 1. We found out it was not significantly influenced by the existence of the punched holes in a slice of ginger because the punched holes grow smaller immediately. 2. The duration of the preheating period became longer according to thickness of a slice of ginger and was not directly proportional to the density of moxa cone. The duration of the preheating period was extremely short when it burned a 100mg moxa cone. That was influenced by the density of moxa cone. 3. The duration of the heating period became longer according to thickness of a slice of ginger likewise the preheating period bacause the density of moxa cone had effected on the combustion characteristics. The duration of the heating period was extremely long when it burned a 100mg moxa cone. On the other hand the maximum temperature in the heating period was appeared that the combustion with a thin slice of ginger was highest and measured that the large density of moxa cone was higher. But the maximum temperature in the heating period was about $37.8^{\circ}C{\sim}44.2^{\circ}C$respectively lower in others. 4. The duration of the retaining period was some doubling shorter than that of the heating period that is concerned the shape of moxa cone. The temperature measured the close of a retaining period was $36.6^{\circ}C{\sim}41.8^{\circ}C$, that was considerably lower temperature. 5. The mean ascending temperature velocity and the mean descending temperature velocity were $0.042{\sim}0.073^{\circ}C/sec$, $-0.027{\sim}-0.064^{\circ}C/sec$ respectively. Then, the ascending temperature velocity was some faster than the ascending temperature velocity. Conclusions : The quantitative standard for obtaining the effective heating stimulation is that if the slice of ginger made a hole in it, we had to use the needle above 1.5mm diameter. The recommended size of a slice ginger is the 14mm diameter and the 2~3mm thickness. The moxa cone is formed the conical shape that the base diameter was 8mm, the height was 10mm, the density was $600mg/cm^2$.

  • PDF

부정교합 분류에 따른 두경부 위치의 두부방사선 계측학적 연구 (Cephalometric study on head posture according to the Classification of Malocclusion)

  • 황충주;김석현;길재경
    • 대한치과교정학회지
    • /
    • 제27권2호
    • /
    • pp.221-230
    • /
    • 1997
  • 두경부 자세는 생리적 활동의 기능적 요구에 의해 영향을 받으며 두개 안면 골격의 형태학적 발육에 직접 혹은 간접으로 영향을 미치는 것으로 알려져 있다. 대부분의 연구에서 안모형태와 설골의 위치,두경부 자세는 서로 매우 높은 상관 관계를 나타내며, 특히 하악골의 전후방 위치가 두경부 자세와 가장 큰 상관 관계를 가지는 것으로 알려져 있다. 이와같은 연구에서는 대부분 연구대상을 Natural Head Position(NHP)으로 유도하였으며 여러 연구자들에 의해 NHP의 재현성이 매우 높다고 알려져있으나, 교정환자를 위해 통법의 두부방사선 사진을 찍은 경우에는 어떠한 상관관계가 있는지에 대해선 연구가 적은 실정이다. 이에 본 연구에서는 여러 안모 유형의 성인 여자 환자를 대상으로 수직기 준선을 나타내는 수직선 추를 이용하여 통법에 따라 채득한 치료전 측모 두부방사선 사진을 이용하여 Wits와 ANB을 기준으로 골격성 부정교합군을 I, II, III로 분류하였으며 각 군별 20명씩 선택하여 두경부 위치와 설골 위치의 부정교합 분류에 따른 상관성 여부를 알아보아 다음과 같은 결론을 얻었다. 1. 두개저에 대한 설골의 수직적 위치 비교시 Cl II에 비해 C1 III 에서 설골이 더 하방 위치하였다 2. 경추에 대한 설골의 전후방 위치 비교시 Cl II 에 비해 Cl III 에서 설골이 더 전방 위치 하였다. 3. 하악에 대한 설골의 수직적 위치는 Cl I, II, III 간에 통계학적 유의차가 없었다. 4. 악골의 전후방 관계를 나타내는 A N B, Wits 와 설골의 위치 사이에는 통계학적 상관관계를 관찰할 수 없었다. 5. Cl II 에서 나타나는 상대적인 두부 신전 (extension)은 Bjork Sum, ANB와 역상관관계를 나타냈다 6. Cl II 와 Cl III 에서 Post to Ant Facial Height 과 NSL/VER은 순상관관계를 나타냈다.

  • PDF

한반도 에어로졸 라이다 네트워크(KALION)의 에어로졸 유형 구분 및 질량 농도 산출 알고리즘 (The KALION Automated Aerosol Type Classification and Mass Concentration Calculation Algorithm)

  • 여희동;김상우;이철규;김덕현;김병곤;김세원;남형구;노영민;박수진;박찬봉;서광석;최진영;이명인;이은혜
    • 대한원격탐사학회지
    • /
    • 제32권2호
    • /
    • pp.119-131
    • /
    • 2016
  • 한반도 에어로졸 라이다 관측 네트워크(Korea Aerosol Lidar Observation Network; KALION)의 라이다 관측자료 처리 및 실시간 표출을 위한 표준 알고리즘을 개발하였다. KALION 표준 알고리즘은 라이다 관측으로부터 얻어진 후방산란강도와 편광소멸도 자료를 이용하여 (1) 에어로졸과 구름 구분, (2) 에어로졸 유형 구분, (3) 에어로졸 소산계수 그리고 (4) 에어로졸 질량농도를 산출하는 단계로 구성이 되어 있다. 에어로졸의 유형은 후방산란강도와 편광소멸도 자료에 근거하여, (대륙 기원) 청정기단 에어로졸(clean continental aerosol), 황사(dust aerosol) 그리고 오염 입자(polluted continental/urban pollution aerosol)로 구별된다. 에어로졸 소산계수에 필요한 라이다 상수는 약 9년간의 라이다와 스카이 라디오미터 자료로부터 도출된 63.31 sr을, 에어로졸 질량소산효율은 약 9년간의 라이다와 기상청 Particulate Matter($PM_{10}$) 질량농도 자료를 이용하여 도출된 $3.36m^2\;g^{-1}$ (황사는 $1.39m^2\;g^{-1}$)을 적용한다. 2015년 3월 28일부터 30일까지 라이다 관측 사례(서울 관악)에서 KALION 표준 알고리즘을 통해 산출된 에어로졸 유형 구분, 특히 황사 판별 결과는 기상청의 황사 보고와 잘 일치하였으며, 2006년 6월부터 약 9년 동안의 라이다 관측자료로부터 산출된 에어로졸 질량농도 역시 지상 $PM_{10}$ 농도와 약 $3{\mu}g\;m^{-3}$ 내에서 잘 일치하였다. 향후 에어로졸의 유형에 따른 서로 다른 라이다 상수 및 에어로졸 질량소산효율 적용 알고리즘, 빙정 구름(ice cloud)과 물방울 구름(water droplet cloud) 구분 알고리즘, 그리고 운저 고도와 혼합고 판별 알고리즘을 개발할 계획에 있다.

지구물리탐사 방법의 석탑지반 안전진단에의 적용 (Application of geophysical exploration methods for safety diagnosis of the basement of stone pagoda)

  • 서만철;오진용;김기현
    • 한국지구물리탐사학회:학술대회논문집
    • /
    • 한국지구물리탐사학회 2004년도 정기총회 및 제6최 특별 심포지움
    • /
    • pp.70-83
    • /
    • 2004
  • 문화유산의 안전진단에 대한 가장 중요한 전제는 비파괴에 있다. 석조문화재에 대하여서도 비파괴진단과 보존을 위한 연구는 필수적이며 주요한 기술적 핵심이다. 비파괴진단 기술로서 지구물리탐사는 석조문화재 지반의 특징을 밝히는 중요한 역할을 하는데, 그 이유는 지반의 특성을 이해하는 것이 안전진단에 필수적이기 때문이다. 탐사사례로 국보급문화재인 경주 불국사의 다보탑(높이 10.4m, 기단폭 7.4m, 하중 123.2 ton)과 석가탑(높이 10.8m, 기단폭 4.4m, 하중 82.3ton)에 대한 지구물리탐사가 이루어졌다. 현재 석탑에서는 풍화는 물론 탑의 기울임 및 지대석의 어긋남 현상들이 관찰된다. 두 탐을 구성하는 석재의 역학적 성질을 위해 초음파 속도 측정을 실시하였고 천부지하구조를 위해 탄성파, 전기비저항, 지하레이더 등의 비파괴 복합 지구물리탐사를 석탑 주변에서 수행하였다. 초음파 속도범위는 석가탑에서는 1217${\~}$4403 m/s이며, 다보탑에서는 584${\~}$5845 m/s이며 이로부터 추정한 일축강도 평균치는 각각 463 kg/$cm^2$, 409 kg/$cm^2$이다. 탄성파 속도 분포에서는 다보탑 지반이 더 큰 속도를 보여 상대적으로 석가탑 지반보다 견고함을 보여준다. 대체로 석탑지반의 전기비저항은 최대 2200 $\Omega$m이며 200 $\Omega$m내외의 외부지반보다 더 높은 값을 보인다. 복합 지구물리탐사 결과를 종합하면 다보탑지반의 형태는 팔각형(한 변은 6 m)으로 그 깊이는 약 4 m 이나, 석가탑지반은 약 8${\times}$10 m의 직사각형 형태로 깊이는 약 3 m 이다. 이는 석탑 건립 당시 약 $8ton/m^2$의 탑 하중을 견디기 위해 구축한 기초구조로 해석한다. 대체로 두 석탑의 북서쪽 부분이 주변지역보다 낮은 탄성파 속도와 낮은 비저항 값이 관찰되는데 이 부분은 연약한 지반으로 판단하며 각 석탑이 북북서쪽 방향으로 기우는 원인으로 판단한다.

  • PDF

삼나무 임분수확량 평가 및 예측 (Assessment and Prediction of Stand Yield in Cryptomeria japonica Stands)

  • 손영모;강진택;황정순;박현;이광수
    • 한국산림과학회지
    • /
    • 제104권3호
    • /
    • pp.421-426
    • /
    • 2015
  • 본 연구는 우리나라 삼나무의 생장 및 수확량 평가와 탄소저장 및 흡수량을 알아보기 위하여 수행되었다. 조사구는 전남, 경남 및 제주지역에 정상적으로 생육하는 삼나무 집단지에서 총 106개 표준지를 선정(이상치를 제외한 92개소 이용)하였다. 그리고 분석을 위하여 Weibull 직경분포 모델을 적용시켰다. 직경분포 추정을 위하여 흉고직경, 흉고단면적, 수고 등 생장인자별 생장 추정식을 도출하고, 이들에 대한 적합성을 검증하였다. 그리고 삼나무에 대한 지역별 임지생산력을 파악할 수 있는 지위지수를 Schumacher 모델로서 개발하였으며, 지위지수 추정의 기준임령은 30년으로 정하였다. 우리나라 삼나무의 지위지수 범위는 10~16에 있는 것으로 나타났으며, 이를 기준으로 임분수확표를 조제하였다. 임분수확표 지위 14에 의하면, 25년생일 때 연평균생장량(MAI)이 $7.6m^3/ha$인 것으로 나타나며, 임목축적 $190.1m^3/ha$이 될 것으로 예측되었다. 이는 편백보다 $20m^3$ 정도 높은 값이었다. 그리고 삼나무의 연간 탄소흡수량은 임령 25년에 2.14 tC/ha/yr, $7.83tCO_2/ha/yr$으로 최대값을 갖는 것으로 나타났다. 이를 타 침엽수와 비교해 보면, 편백($7.5tCO_2/ha/yr$)보다는 약간 높은 수준이나, 잣나무 $10.4tCO_2/ha/yr$, 낙엽송 $11.2tCO_2/ha/yr$ 보다는 낮은 수치였다. 이러한 연구결과를 기반으로 삼나무의 생장 정보 활용 뿐만아니라 목재로서의 이용을 제고할 수 있는 방안 마련이 필요하다고 사료된다.

III급 부정교합자의 이부형태와 두개안면형태의 연관성 (The relationship between the morphology of mandibular symphysis and the craniofacial morphology in class III malocclusion)

  • 김상두;권오원;성재현
    • 대한치과교정학회지
    • /
    • 제26권5호
    • /
    • pp.509-522
    • /
    • 1996
  • 하악골 성장양상이 진단과 치료, 치료후 예후에 특히 중요한 III급 부정교합자에 있어 그 성장양상을 예측하는데 도움을 주고자 사춘기 전으로 생각되는 남자 10-12세군(G1군)과 악골성장이 거의 끝난 것으로 생각되는 성인으로 남자 20세 이상군(G2군)에 대하여 각각 이부비율에 따라 다시 3군으로 분류하고 이부형태와 두개안면형태의 연관성을 연구 한 결과 다음과 같은 결론을 얻었다. 1. 평균 이부비율에 있어 G2군이 G1군에 비해 통계학적으로 유의성 있게 크게 나타났다(p<0.05). 2. G1군과 G2군 모두 이부비율과 두개저 계측항목과는 상관성이 없었다(P>0.05). 3. 상하악골의 수평적 관계 계측항목에서 G1군과 G2군 모두 이부비율과 상악골 계측항목과는 상관성이 없었다(p>0.05). 또한 G1군과 G2군 모두 L, A, S군간 하악의 전후적 위치는 뚜렷한 차이가 없고, 단지 G1군의 Y-axis angle에서 L군이 S군에 비해 크고 G2군은 Pog to Na perp.에서 S군이 L군에 비해 통계학적으로 유의성 있게 크게 나타났다(p<0.05). 4. 하악골의 형태 계측항목에서 gonial angle은 G1군과 G2군 모두 이부비율이 클 수록 수치적으로 증가하나 통계학적인 유의성은 없었다(p>0.05). Lower genial angle과 chin angle은 G1군에서 L군과 A군이 S군보다 통계학적으로 유의성 있게 크게 나타났다(p<0.05). 5. 안면의 수직적 관계 계측항목에서 G1군은 L군이 S군에 비해 전안면고경, 전하안면고경이 통계학적으로 유의성 있게 크며(p<0.05) 하악골이 하방성장한 경향을 보여주었다. 6. 치아의 위치 및 경사도 계측항목에서 G1군은 하방성장을 많이 한 L군이 S군에 비해 상하악 치아들이 정출되어 있는 경향을 보여주었지만 G2군은 단지 하악치아 만이 그러한 경향이 있었다. 7. 이부비율과 다른 계측항목과의 상관분석에서 G1군은 chin angle, PP/MP angle, ANS-Me등 많은 계측항목에서 G2군은 단지 MP-LIT와 MP-LMMC에서 통계학적으로 유의성 있는 상관성을 보였다(p<0.05, p<0.01). 이상을 종합하면 어린 남자군인 G1군에서는 이부비율이 큰 군(L군)과 작은 군(S군)사이에 수평적 골격관계는 차이가 없으나 수직적 골격관계는 L군이 S군에 비해 하악골이 하방으로 많이 성장한 경향을 보여주었다. 하지만 성인 남자군인 G2군에서는 이부비율에 따른 안면골격의 뚜렷한 형태적 차이를 보여주지 않았다.

  • PDF

꿀샘식물 아까시나무의 지위지수 도출 및 직경분포 변화 (Development of Diameter Distribution Change and Site Index in a Stand of Robinia pseudoacacia, a Major Honey Plant)

  • 김소라;송정은;박천희;민수희;홍성희;윤준혁;손영모
    • 한국산림과학회지
    • /
    • 제111권2호
    • /
    • pp.311-318
    • /
    • 2022
  • 본 연구는 꿀샘식물인 아까시나무의 적지적수 조림을 위해 판정기준인 지위지수를 도출하고, 도출된 지위지수별 경급별 분포 변화를 알아보기 위하여 수행되었다. 아까시나무 임분의 지위지수를 추정하기 위하여 적용한 모델은 Chapman-Richards식이었다. 도출된 식에 따르면, 우리나라 아까시나무의 지위지수는 기준임령이 30년 일 때 16~22 범위 내에 분포하는 것으로 나타났다. 그리고 지위지수 추정 모델의 적합성은 약 37%정도로 낮았으나, 식의 잔차분포가 한쪽으로 치우지지 않아(bias -0.0030) 활용에는 문제가 없는 것으로 판단된다. 아까시나무 생장에 따른 지위별 직경분포를 구명하기 위해서는 Weibull 직경분포함수를 이용하였다. 직경의 분포를 나타내는 인자로 평균직경과 우세목 수고를 설명변수로 하였으며, 이들은 Weibull 직경분포함수의 모수를 추정하고 복구하는 단계를 거쳤다. 최종적으로는 아까시나무 임분의 평균직경과 우세목 수고로서 직경급별 분포를 나타낼 수 있었으며, 분포 추정에 대한 설명력은 약 80.5%인 것으로 나타났다. 지위지수별 직경분포를 30년생 기준으로 도식화한 결과, 지위지수가 높을수록 직경분포 곡선이 오른쪽으로 이동함을 알 수 있었다. 즉 적지적수를 고려하여 지위지수가 높은 곳에 조림한다면 아까시나무의 생장이 왕성해져 용재생산 뿐만아니라 꿀 생산도 많아질 것임을 유추할 수 있었다. 따라서 본 아까시나무 지위지수분류표와 곡선이 꿀샘식물인 아까시나무를 조성 및 관리함에 있어 의사결정의 기준이 되기를 기대한다.

논벼 장.단간품종의 증발산제계수와 건물량과의 관계에 대한 연구(I) (Studies on Relations between Various Coeffcients of Evapo-Transpiration and Quantities of Dry Matters for Tall-and Short Statured Varieties of Paddy Rice)

  • 류한열;김철기
    • 한국농공학회지
    • /
    • 제16권2호
    • /
    • pp.3361-3394
    • /
    • 1974
  • The purpose of this thesis is to disclose some characteristics of water consumption in relation to the quantities of dry matters through the growing period for two statured varieties of paddy rice which are a tall statured variety and a short one, including the water consumption during seedling period, and to find out the various coefficients of evapotranspiration that are applicable for the water use of an expected yield of the two varieties. PAL-TAL, a tall statured variety, and TONG-lL, a short statured variety were chosen for this investigation. Experiments were performed in two consecutive periods, a seedling period and a paddy field period, In the investigation of seedling period, rectangular galvanized iron evapotranspirometers (91cm${\times}$85cm${\times}$65cm) were set up in a way of two levels (PAL-TAL and TONG-lL varieties) with two replications. A standard fertilization method was applied to all plots. In the experiment of paddy field period, evapotanspiration and evaporation were measured separately. For PAL-TAL variety, the evapotranspiration measurements of 43 plots of rectangular galvanized iron evapotranspirometer (91cm${\times}$85cm${\times}$65cm) and the evaporation measurements of 25 plots of rectangular galvanized iron evaporimeter (91cm${\times}$85cm${\times}$15cm) have been taken for seven years (1966 through 1972), and for TONG-IL variety, the evapotranspiration measurements of 19 plots and the evaporation measurements of 12 plots have been collected for two years (1971 through 1972) with five different fertilization levels. The results obtained from this investigation are summarized as follows: 1. Seedling period 1) The pan evaporation and evapotranspiration during seedling period were proved to have a highly significant correlation to solar radiation, sun shine hours and relative humidity. But they had no significant correlation to average temperature, wind velocity and atmospheric pressure, and were appeared to be negatively correlative to average temperature and wind velocity, and positively correlative to the atmospheric pressure, in a certain period. There was the highest significant correlation between the evapotranspiration and the pan evaporation, beyond all other meteorological factors considered. 2) The evapotranpiration and its coefficient for PAL-TAL variety were 194.5mm and 0.94∼1.21(1.05 in average) respectively, while those for TONG-lL variety were 182.8mm and 0.90∼1.10(0.99 in average) respectively. This indicates that the evapotranspiration for TONG-IL variety was 6.2% less than that for PAL-TAL variety during a seedling period. 3) The evapotranspiration ratio (the ratio of the evapotranspiration to the weight of dry matters) during the seedling period was 599 in average for PAL-TAL variety and 643 for TONG-IL variety. Therefore the ratio for TONG-IL was larger by 44 than that for PAL-TAL variety. 4) The K-values of Blaney and Criddle formula for PAL-TAL variety were 0.78∼1.06 (0.92 in average) and for TONG-lL variety 0.75∼0.97 (0.86 in average). 5) The evapotranspiration coefficient and the K-value of B1aney and Criddle formular for both PAL-TAL and TONG-lL varieties showed a tendency to be increasing, but the evapotranspiration ratio decreasing, with the increase in the weight of dry matters. 2. Paddy field period 1) Correlation between the pan evaporation and the meteorological factors and that between the evapotranspiration and the meteorological factors during paddy field period were almost same as that in case of the seedling period (Ref. to table IV-4 and table IV-5). 2) The plant height, in the same level of the weight of dry matters, for PAL-TAL variety was much larger than that for TONG-IL variety, and also the number of tillers per hill for PAL-TAL variety showed a trend to be larger than that for TONG-IL variety from about 40 days after transplanting. 3) Although there was a tendency that peak of leaf-area-index for TONG-IL variety was a little retarded than that for PAL-TAL variety, it appeared about 60∼80 days after transplanting. The peaks of the evapotranspiration coefficient and the weight of dry matters at each growth stage were overlapped at about the same time and especially in the later stage of growth, the leaf-area-index, the evapotranspiration coefficient and the weight of dry matters for TONG-IL variety showed a tendency to be larger then those for PAL-TAL variety. 4) The evaporation coefficient at each growth stage for TONG-IL and PAL-TALvarieties was decreased and increased with the increase and decrease in the leaf-area-index, and the evaporation coefficient of TONG-IL variety had a little larger value than that of PAL-TAL variety. 5) Meteorological factors (especially pan evaporation) had a considerable influence to the evapotranspiration, the evaporation and the transpiration. Under the same meteorological conditions, the evapotranspiration (ET) showed a increasing logarithmic function of the weight of dry matters (x), while the evaporation (EV) a decreasing logarithmic function of the weight of dry matters; 800kg/10a x 2000kg/10a, ET=al+bl logl0x (bl>0) EV=a2+b2 log10x (a2>0 b2<0) At the base of the weight of total dry matters, the evapotranspiration and the evaporation for TONG-IL variety were larger as much as 0.3∼2.5% and 7.5∼8.3% respectively than those of PAL-TAL variety, while the transpiration for PAL-TAL variety was larger as much as 1.9∼2.4% than that for TONG-IL variety on the contrary. At the base of the weight of rough rices the evapotranspiration and the transpiration for TONG-IL variety were less as much as 3.5% and 8.l∼16.9% respectively than those for PAL-TAL variety and the evaporation for TONG-IL was much larger by 11.6∼14.8% than that for PAL-TAL variety. 6) The evapotranspiration coefficient, the evaporation coefficient and the transpiration coefficient and the transpiration coefficient were affected by the weight of dry matters much more than by the meteorological conditions. The evapotranspiratioa coefficient (ETC) and the evaporation coefficient (EVC) can be related to the weight of dry matters (x) by the following equations: 800kg/10a x 2000kg/10a, ETC=a3+b3 logl0x (b3>0) EVC=a4+b4 log10x (a4>0, b4>0) At the base of the weights of dry matters, 800kg/10a∼2000kg/10a, the evapotranspiration coefficients for TONG-IL variety were 0.968∼1.474 and those for PAL-TAL variety, 0.939∼1.470, the evaporation coefficients for TONG-IL variety were 0.504∼0.331 and those for PAL-TAL variety, 0.469∼0.308, and the transpiration coefficients for TONG-IL variety were 0.464∼1.143 and those for PAL-TAL variety, 0.470∼1.162. 7) The evapotranspiration ratio, the evaporation ratio (the ratio of the evaporation to the weight of dry matters) and the transpiration ratio were highly affected by the meteorological conditions. And under the same meteorological condition, both the evapotranspiration ratio (ETR) and the evaporation ratio (EVR) showed to be a decreasing logarithmic function of the weight of dry matters (x) as follows: 800kg/10a x 2000kg/10a, ETR=a5+b5 logl0x (a5>0, b5<0) EVR=a6+b6 log10x (a6>0 b6<0) In comparison between TONG-IL and PAL-TAL varieties, at the base of the pan evaporation of 343mm and the weight of dry matters of 800∼2000kg/10a, the evapotranspiration ratios for TONG-IL variety were 413∼247, while those for PAL-TAL variety, 404∼250, the evaporation ratios for TONG-IL variety were 197∼38 while those for PAL-TAL variety, 182∼34, and the transpiration ratios for TONG-IL variety were 216∼209 while those for PAL-TAL variety, 222∼216 (Ref. to table IV-23, table IV-25 and table IV-26) 8) The accumulative values of evapotranspiration intensity and transpiration intensity for both PAL-TAL and TONG-IL varieties were almost constant in every climatic year without the affection of the weight of dry matters. Furthermore the evapotranspiration intensity appeared to have more stable at each growth stage. The peaks of the evapotranspiration intensity and transpiration intensity, for both TONG-IL and PAL-TAL varieties, appeared about 60∼70 days after transplanting, and the peak value of the former was 128.8${\pm}$0.7, for TONG-IL variety while that for PAL-TAL variety, 122.8${\pm}$0.3, and the peak value of the latter was 152.2${\pm}$1.0 for TONG-IL variety while that for PAL-TAL variety, 152.7${\pm}$1.9 (Ref.to table IV-27 and table IV-28) 9) The K-value in Blaney & Criddle formula was changed considerably by the meteorological condition (pan evaporation) and related to be a increasing logarithmic function of the weight of dry matters (x) for both PAL-TAL and TONG-L varieties as follows; 800kg/10a x 2000kg/10a, K=a7+b7 logl0x (b7>0) The K-value for TONG-IL variety was a little larger than that for PAL-TAL variety. 10) The peak values of the evapotranspiration coefficient and k-value at each growth stage for both TONG-IL and PAL-TAL varieties showed up about 60∼70 days after transplanting. The peak values of the former at the base of the weights of total dry matters, 800∼2000kg/10a, were 1.14∼1.82 for TONG-IL variety and 1.12∼1.80, for PAL-TAL variety, and at the base of the weights of rough rices, 400∼1000 kg/10a, were 1.11∼1.79 for TONG-IL variety and 1.17∼1.85 for PAL-TAL variety. The peak values of the latter, at the base of the weights of total dry matters, 800∼2000kg/10a, were 0.83∼1.39 for TONG-IL variety and 0.86∼1.36 for PAL-TAL variety and at the base of the weights of rough rices, 400∼1000kg/10a, 0.85∼1.38 for TONG-IL variety and 0.87∼1.40 for PAL-TAL variety (Ref. to table IV-18 and table IV-32) 11) The reasonable and practicable methods that are applicable for calculating the evapotranspiration of paddy rice in our country are to be followed the following priority a) Using the evapotranspiration coefficients based on an expected yield (Ref. to table IV-13 and table IV-18 or Fig. IV-13). b) Making use of the combination method of seasonal evapotranspiration coefficient and evapotranspiration intensity (Ref. to table IV-13 and table IV-27) c) Adopting the combination method of evapotranspiration ratio and evapotranspiration intensity, under the conditions of paddy field having a higher level of expected yield (Ref. to table IV-23 and table IV-27). d) Applying the k-values calculated by Blaney-Criddle formula. only within the limits of the drought year having the pan evaporation of about 450mm during paddy field period as the design year (Ref. to table IV-32 or Fig. IV-22).

  • PDF

유지구 설계가 주조연결강도에 미치는 영향에 관한 삼차원 유한요소법적 연구 (Three-dimensional finite element analysis for the effect of retentive groove design on joint strength of casting connection)

  • 김정우;정창모;전영찬;윤미정
    • 대한치과보철학회지
    • /
    • 제47권1호
    • /
    • pp.29-38
    • /
    • 2009
  • 연구목적: 본 연구에서는 주조연결부의 하중 전달기전과 함께 연결강도를 증진시킬 수 있는 기계적 유지구 설계 방법을 주조연결한 3-unit 고정성 국소의치의 삼차원 유한요소 모형으로 응력분포를 비교 관찰하여 알아보고자 하였다. 연구 재료 및 방법: 10개의 유한요소 모형을 형성하였다. (모형 A: 1개의 유지구, 모형 B: 2개의 유지구, 모형 C: 3개의 유지구, 모형 D: 4개의 유지구, 모형 E: 1개의 수평구와 2개의 수직구, 모형 F: 2개의 수평구와 1개의 수직구, 모형 G: 크기가 증가된 1개의 유지구, 모형 H: 크기가 증가된 2개의 유지구, 모형 I: 높이가 증가된 1개의 유지구, 모형 J: 기저부 너비가 증가된 1개의 유지구). 하악 제 1대구치에서 이차 주조체 양측의 근심와와 원심와에 수직하중을 가하였다. 결과: 일차 주조체와 이차 주조체 간의 유지력과 유지구 형성 후에 남아 있는 일차 주조체 연결부의 두께가 주조연결부의 강도에 영향을 주는 주요소였다. 유 지구의 개수나 크기 증가에 따른 유지력 증가는 응력을 분산시키는 효과를 나타냈으나 경우에 따라서는 상대적으로 일차 주조체의 연결부 두께를 감소시켜 응력 값이 증가하는 결과를 초래하였으며, 주조연결부의 기계적 실패는 이차 주조체보다는 일차 주조체에서 일어날 가능성이 높았다. 결론: 주조연결을 위한 유지구 형성 시에는 일차 주조체 연결부의 잔존 금속 두께를 고려하여 유지구의 개수를 제한하고, 이와 함께 일차 주조체와 이차 주조체간의 유지력을 최대화하기 위하여 유지구의 기저면보다는 깊이를 증가시키는 유지구 설계가 바람직한 방법으로 생각된다.

백제 한성기 토성의 축조기술 (Construction Techniques of Earthen Fortifications in the Hanseong Period of Baekje Kingdom)

  • 이혁희
    • 헤리티지:역사와 과학
    • /
    • 제55권2호
    • /
    • pp.168-184
    • /
    • 2022
  • 이 글은 삼국시대 토성 가운데 가장 많은 조사가 이루어진 백제 한성기 토성을 대상으로 축조기술을 살펴보기 위해 작성되었다. 이를 위해 토성의 축조공정을 '입지선정과 기저부 조성', '체성 축조', '공정의 마무리와 증축 및 보수'로 나누어 검토하였다. 백제 한성기 토성의 축조에는 다양한 기술이 동원되었음이 분명하게 확인된다. 지형조건에 따라 알맞은 기초보강기술이 적용되었으며, 본격적인 체성의 축조에도 여러 가지 기술을 활용하였다. 특히 체성축조 기술의 경우 성토기법과 판축기법으로 뚜렷하게 구분할 수 있다. 성토기법(A식)은 2000년대부터 본격적으로 인식된 기술로, 판축에 비해 고식적인 기술로 추정된다. 판축구조물을 사용하지 않은 기술로, 복잡한 토층선, 교호성토 방식, 토제 및 토괴 활용, 타원형 성토단위의 연접 등을 특징으로 꼽을 수 있다. 성토기법은 삼국시대 성토구조물 사이의 적극적인 기술 공유와 응용을 이해할 수 있게 하는 기술이기도 하다. 판축기법(B식)은 판축구조물을 이용하여 성벽을 구축하는 기술로, 판축구조물의 높이와 규모, 확장방식을 기준으로 B1식과 B2식으로 구분이 가능하다. B1식이 선행하며, 한성기 말기에 B2식이 도입된 것으로 보인다. 판축기법은 서울 풍납토성을 시작으로 하여 남한지역 각지로 확산된 것으로 판단된다. 성토기법과 판축기법은 등장시점부터 공존하였으며, 점차 판축토성 위주로 변화하였다. 성토기법과 판축기법은 토층 양상이 판이하며 축조 순서 또한 정반대이다. 따라서 양자는 기술 계통이 서로 달랐던 것으로 추정된다. 백제 한성기부터 시작된 토성의 축조기술은 웅진·사비기에도 계승 및 발전하였으며, 그 과정에서는 다른 국가와의 활발한 상호작용이 있었을 것이다. 최근 남부지역을 중심으로 토성 조사사례가 증가하는 추세이므로, 백제를 포함한 주변 국가와의 비교·분석이 입체적으로 이루어질 것으로 기대한다.