• Wind and Structures
• /
• v.34 no.3
• /
• pp.275-290
• /
• 2022

Mobile sand barriers are a new type sand-retaining structure that can be moved and arranged according to the engineering demands of sand control. When only used for sand trapping, mobile sand barriers could be arranged in single row. For the dual purposes of sand trapping and sand stabilization, four rows of mobile sand barriers can be arranged in a staggered form. To reveal the effect of plane layout, the included angle between sand barrier direction and wind direction on the characteristics of flow fields and the sand control laws of mobile sand barriers, numerical computations and wind tunnel tests were conducted. The results showed that inflows deflected after passing through staggered arrangement sand barriers due to changes in included angle, and the sand barrier combination exerted successive wind resistance and group blocking effects. An analysis of wind resistance efficiency revealed that the effective protection length of staggered arrangement sand barriers approximately ranged from the sand barrier to 10H on the leeward side (H is sand barrier height), and that the effective protection length of single row sand barriers roughly ranged from 1H on the windward side to 20H on the leeward side. The distribution of sand deposit indicated that the sand interception increased with increasing included angle in staggered arrangement. The wind-breaking and sand-trapping effects were optimal when included angle between sand barrier direction and wind direction is 60°-90°.

• Fire Science and Engineering
• /
• v.20 no.4 s.64
• /
• pp.98-104
• /
• 2006

The Fire Protection Regulatory documents require the fire-resistive rating of fire barrier penetration seals be same as that of fire barriers. Pilot application of penetration seal evaluation for K nuclear plant, built before penetration seal requirements were made, was done. In this evaluation, visual inspection and estimating fire rating by comparing installed configuration with tested configuration of penetration seals, called bounding approach method, were applied. Further improvements for retrofit and maintenance are recommended with penetration seal evaluation results also. The practical use of the methodology adopted in this study and the evaluation result of K nuclear plant will be anticipated for other plant's penetration seal evaluation.

• International Journal of Highway Engineering
• /
• v.17 no.4
• /
• pp.63-68
• /
• 2015

PURPOSES : A study on the efforts to minimize the road traffic noise has been underway. An attempt has been made to measure the noise level using a noise map; however, the attempt is limited to certain areas only. In general, a noise barrier is employed to prevent road traffic noise; however, unplanned noise barriers developed without considering the surrounding environment, including excessively high walls, cause problems such as infringement on prospect right. Noise ceiling at daytime in Korea is 68 dB(A), which is relatively higher than in other countries. METHODS: The noise barrier used mainly for road noise reduction was analyzed to estimate the optimal height. Related variables such as road width, the height of the upper part, distance to the building, and angle (for instance, $30^{\circ}$). RESULTS : A formula to calculate the optical height of the noise barrier, considering the road environment (i.e., parameters such as road width and distance to building), was developed in this study in an attempt to mitigate the noise generated from the road. CONCLUSIONS : The formula to calculate the noise barrier is expected to lead to cost saving, accurate installation of barriers, and protection of the right of prospect.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.15 no.1
• /
• pp.119-132
• /
• 2012

In order to connect eco-corridor and to harmonize with natural environment, it is necessary to construct small debris barrier. Therefore, we will evaluate applicability of small debris barrier which made of tetrapod utilized in construction of seashore protection facilities and breakwater. From result compared with the adaptation processes in fields, tetrapod were stabilized to critical tractive force. Stability evaluation method on sliding and overturn of tetrapod debris barrier was developed, and hereafter could be applied to similar debris barriers. According to results analyzed to continuity on sediment supply in debris barrier, boulders were deposited in upstream and gravels were deposited in downstream. Therefore, tetrapod debris barrier will be able to prevent in the long-term the erosion of river bed in down-stream, and the maintenance is easy because dredging is not necessary. Current were formed in between the tetrapod provided eco-corridors for fishes and shellfishes.

• Journal of Korean Society of Disaster and Security
• /
• v.16 no.4
• /
• pp.137-145
• /
• 2023

Accidents involving deaths of children and pedestrians continue to occur in child protection zones, also known as school zones. Over the three years from 2019 to 2021, 11 child deaths occurred in school zones in Korea. In December 2022, a fatal accident occurred among an elementary school student in a school zone near an elementary school in Gangnam-gu, Seoul. In April 2023, an accident occurred in which an elementary school student died in a school zone near Seo-gu Middle School in Daejeon and an elementary school in Yeongdo-gu, Busan. Until recently, child deaths continued to occur on sidewalks in child protection zones. It is time to closely review the status of safety facilities installed in school zones and related regulations. We investigated and analyzed the current status of safety facilities and related regulations installed on sidewalks in child protection zones in Korea, and identified matters necessary for institutional improvement regarding safety facilities for sidewalks in child protection zones.

• Journal of Ginseng Research
• /
• v.45 no.2
• /
• pp.354-360
• /
• 2021

Background: Protopanaxatriol (PPT) is a secondary intestinal metabolite of ginsenoside in ginseng. Although the effects of PPT have been reported in various diseases including cancer, diabetes and inflammatory diseases, the skin protective effects of PPT are poorly understood. Methods: HaCaT cells were treated with PPT in a dose-dependent manner. mRNA and protein levels which related to skin barrier and hydration were detected compared with retinol. Luciferase assay was performed to explore the relative signaling pathway. Western blot was conducted to confirm these pathways and excavated further signals. Results: PPT enhanced the expression of filaggrin (FLG), transglutaminase (TGM)-1, claudin, occludin and hyaluronic acid synthase (HAS) -1, -2 and -3. The mRNA expression levels of FLG, TGM-1, HAS-1 and HAS-2 were suppressed under NF-κB inhibition. PPT significantly augmented NF-κB-luc activity and upregulated Src/AKT/NF-κB signaling. In addition, PPT also increased phosphorylation of the mitogen-activated protein kinases (MAPKs) ERK, JNK and p38 and upstream MAPK activators (MEK and MKK). Furthermore, transcriptional activity of AP-1 and CREB, which are downstream signaling targets of MAPK, was enhanced by PPT. Conclusion: PPT improves skin barrier function and hydration through Src/AKT/NF-κB and MAPK signaling. Therefore, PPT may be a valuable component for cosmetics or treating skin disorders.

• Journal of the Korean Ceramic Society
• /
• v.51 no.5
• /
• pp.481-486
• /
• 2014

Environmental barrier coatings (EBCs) are used to protect SiC-based ceramics or composites from oxidation and corrosion due to reaction with oxygen and water vapour at high temperatures above $1000^{\circ}C$. Mullite ceramics have been studied for environmental barrier coatings for Si-based ceramics. More recently, rare earth silicate ceramics have been identified as more water vapour-resistant materials than mullite for environmental barrier coatings. In this study, we fabricate mullite and yttrium silicate ceramics by an atmospheric plasma spray coating method using spherical granules fabricated by spray drying. As a result, EBCs with thicknesses in the range of $200-300{\mu}m$ are successfully fabricated without any macroscopic cracks or interfacial delamination. Phase and microstructure analysis are conducted, and the basic mechanical properties, such as hardness and indentation load-displacement curves are evaluated.

• Journal of Radiation Protection and Research
• /
• v.6 no.1
• /
• pp.34-40
• /
• 1981

The logical development of an optimum structural shielding design and the computation of protective barriers for high energy radiation therapy room, Toshiba 13 MeV. are presented. We obtained following results by comparison in between the precalculating values and actual survey after complete installation of radiogenerating units. 1. The calculating formula for the protective barrier written in NCRP report #34(1970) was the most ideal and economic calculating methods for the construction of barrier and to determine thickness for the meeting requirements of the number of patients of 80-100 in daily treatment. 2. The precalculating values of protective barrier are 5 times more protective than that of actual measurement. It is depending on radiation workload and utilization the datas most sequrely. 3. The dose rate during exposure are 2-10 mR/hr at out of the door and the controll room. 4. The foul smelling and ozone gas production from long exposure of cancer patients cannot be eliminated when the room is ill ventilated.

• Fibers and Polymers
• /
• v.4 no.2
• /
• pp.54-58
• /
• 2003

Previous research on healthcare workers’ protection has concentrated on liquid barrier protection by providing impermeable personal articles such as latex gloves. This property is of high importance but since most blood-borne pathogen transmissions in the healthcare industry are caused by needle-stick injuries, protection from sharp invasive instruments should also be of high concern. And since latex and alike provide no protection against needle-stick injuries, new protective systems need to be developed and evaluated. This part of the study provides a review regarding the current practice of protection and the serious problems that arise from needle-flick injuries. Additionally, the development of new protective system is described. In part II of the study, evaluation of the new system will be provided.

• The Journal of Information Systems
• /
• v.25 no.3
• /
• pp.1-30
• /
• 2016

Purpose The purpose of this study is to grasp the factors influencing domestic SNS users' privacy protection behavior and verify their relationship through self-efficacy and responsiveness. Thus, this study tries to suggest efficient and effective measures for SNS personal information protection. Design/methodology/approach To this end, with main variables of the protection motivation theory based on the assumption that when users are exposed to the threat to their health, they would have protection motivation and change their behavior of protecting their health, a research model was suggested. In addition, in order to empirically verify the research model, a survey was performed targeting general college students having the experience of using SNS. Findings As a result of the analysis, first, perceived effectiveness and self-efficacy had a positive effect on responsiveness. Second, perceived barrier had a positive effect on self-efficacy. Third, self-efficacy and responsiveness had a positive effect on privacy protection behavior. This study is expected to contribute to establishing an effective guideline for measures that could induce SNS users' privacy protection behavior.