• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.75-76
• /
• 2007

Poly-Si Schottky barrier Thin Film Transistor (SB-TFT) is manufactured with erbium silicided source/drain. High quality poly-Si film was obtained by crystallizing the amorphous Si film with Excimer laser annealing (ELA) method. The fabricated poly-Si SB-TFT devices showed low leakage current and large on/off current ratio. Moreover, the electrical characteristics were considerably improved by 3% $H_2/N_2$ gas annealing, which is attributed to the reduction of trap states at the grain boundaries and interface trap states at gate oxide/poly-si channel.

• Transactions on Electrical and Electronic Materials
• /
• v.18 no.4
• /
• pp.225-228
• /
• 2017

In this study, zinc tin oxide (ZTO) films were prepared on indium tin oxide (ITO) glasses and annealed at different temperatures under vacuum to investigate the correlation between the Ohmic/Schottky contacts, electrical properties, and bonding structures with respect to the annealing temperatures. The ZTO film annealed at $150^{\circ}C$ exhibited an amorphous structure because of the electron-hole recombination effect, and the current of the ZTO film annealed at $150^{\circ}C$ was less than that of the other films because of the potential barrier effect at the Schottky contact. The drift current as charge carriers was similar to the leakage current in a transparent thin-film device, but the diffusion current related to the Schottky barrier leads to the decrease in the leakage current. The direction of the diffusion current was opposite to that of the drift current resulting in a two-fold enhancement of the cut-off effect of leakage drift current due to the diffusion current, and improved performance of the device with the Schottky barrier. Hence, the thin film with an amorphous structure easily becomes a Schottky contact.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1699-1702
• /
• 2007

We will discuss encapsulation of OLEDs on both flexible and rigid glass substrates. Accelerated testing at 6CC/90RH and 85C/85RH is compared and acceleration factors for OLED and Calcium test samples are discussed.We have tested the stability and performance of our barrier coating to much higher temperatures: up to 140 C. Water Vapor Transmission rates at temperatures from 60 to 140 C are presented. Rates and methods for low cost manufacturing on a large scale are analysed

• Journal of the Korean Graphic Arts Communication Society
• /
• v.7 no.1
• /
• pp.16-30
• /
• 1989

The anodixed aluminium film by sulfuric acid - method has many pores, the inner, called barrier layers, is active. They have strong absorption of dye. on be other, the absorption of dye is lost by Sealing, the surface is not dyed. We make IMAGE FORMATION on the film by the chemical behavior. This study made sure whether ion absorption is not in the barrier layer by IRRS and ESCA, considerated the mechanism of inage formation.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1722-1725
• /
• 2007

We will discuss and compare the different ways to manufacture high performance Barix coated barrier films as a substrate for displays: R2R vs Batch. It will be shown that the barrier performance of the Barix coating on plastic can be as good as on glass substrates. More then 1000 hrs of testing at 60C/90RH can be passed without degradation of Ca samples

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.303.1-303.1
• /
• 2016

Polymer-like amorphous carbon films were deposited on polyethylene naphthalate (PEN) substrate by plasma-enhanced chemical vapor deposition (PECVD) and their water vapor transmission rates (WVTR) were tested. propane was used as precursors. To make a polymer-like amorphous carbon film the deposition rate, surface roughness, light transmittance, and WVTR of the films were characterized as a function of the precursor feed ratio and plasma power. The water vapor transmission rates of bare PEN film and single layer PAC on PEN substrate were 6.95 g/m2/day and 0.3 g/m2/day, respectively. The superior property the water vapor permeability of thin layers of PAC was attributed to uniform coverage and good adhesion between PAC film and PEN substrate.

• Journal of Ceramic Processing Research
• /
• v.13 no.spc2
• /
• pp.241-245
• /
• 2012

The barrier rib on plasma display panel (PDP) is a typical 3D-patterned thick film with thickness of 120 ㎛ and it is hard to measure its dielectric constant in this state of the product. Because the porosity of ceramic thick film influenced the mechanical and dielectric characteristics, it was expected that there was the relationship between two properties. Therefore, the correlation analysis between porosity, hardness and dielectric constant of the barrier rib was studied and the exponential curve between porosity and hardness, and the quadratic curve between porosity and dielectric constant were drawn. The dielectric constant was well related to hardness by K400kHz = 0.5672 + 5.695 ln(Hv). The hardness was measured at five points on two real panels which sintered by two types of profiles and then dielectric constants and deviation were estimated by the above equation.

• Polymer(Korea)
• /
• v.37 no.3
• /
• pp.373-378
• /
• 2013

The interfacial adhesion strength is very important in $SiO_x$ deposited PC film for the barrier enhanced polycarbonate (PC) flexible substrate. In this study, PC films were treated by undercoating, UV/$O_3$ and low temperature plasma and then the effect of physical and chemical surface modifications on the interfacial adhesion strength between PC film and $SiO_x$ barrier layer were studied. It was found that untreated PC film shows significantly low interfacial adhesion strength due to the smooth surface and low surface free energy of PC. Low temperature plasma treatments resulted in the increase of both surface roughness and surface free energy due to etching and the appearance of polar molecules on the PC surface. However, UV/$O_3$ treatment only shows the increase of surface free energy by developed polar molecules on the surface. These surface modifications caused the enhancement of surface interfacial strength between PC film and $SiO_x$ barrier. In the case of undercoating, it was found that the increase of surface interfacial strength was achieved by adhesion between various acrylic acid on acrylate coated surface and $SiO_x$ without increase of polar surface energy. In addition, the barrier property is also improved by organic-inorganic hybrid multilayer structure.

• Food Science of Animal Resources
• /
• v.21 no.3
• /
• pp.235-245
• /
• 2001

This study was conducted to evaluate the usefulness of Second-Heat-Seal film(SHS) as an alternative material to PVDC/EVA shrink film(VSP) being currently used by domestic meat packer for vacuum-packaging of fresh meat. The samples from pork loin and beef striploin and round were stored at 2$^{circ}C$ for 5 weeks and measured for the changes of microbial counts, color, pH, volatile basic nitrogen(VBN), purge loss and sensory parameters. The pork loins packed with SHS showed higher spermine contents during the whole storage period at 2$^{circ}C$, and lower counts in total microbes and lactic acid bacteria after 28 days storage at 2$^{circ}C$ than those packed with SHS tended to be lower than those packed with VSP over the storage time. Nevertheless, no significant differences were observed between two packaging treatments in the other quality parameters evaluated. It is therefore concluded that SHS film might have a possibility to substitute for VSP film for vacuum-packaging of fresh meat at least from a materials point of view.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.2
• /
• pp.467-470
• /
• 2009