• 대한화학회지
• /
• 제7권4호
• /
• pp.254-256
• /
• 1963

$KF-BaTiO_3$系와 $TiO_2-BaTiO_3$系에서 각각 成長시킨 $BaTiO_3$의 單結晶中의 중요 不純物을 分光化學分析法으로 定量하여 比較 檢討하였다. 이 分析法은 $SrTiO_3$의 單結晶의 分光化學分析에도 適用된다.

• 한국세라믹학회지
• /
• 제30권12호
• /
• pp.1066-1070
• /
• 1993

When looked upon as a polycrystalline, ceramics have two basic differences from a single crystal. One is that there exist grain boundaries, the other is that the crystal axes of each small crystal are arranged in random directions. But the crystal axes fo small crystals which compose ceramics may be made to have the tendency of being arranged in a specific direction. This is called that the crystal axes are oriented. The degree of the direction arrangement of the crystal axes is called orientation. In order to orient the crystal axes effectively, the fiberous barium titanates were made through KDC method and the ion exchange method. And then they were arranged through pressing, doctor blade, and syringe. As the result of Lotgering evaluation, the sample oriented through syringe showed the highest orientation. After sintering, though the most particles that had been fiberous shaped became global shape viewed through SEM, the orientation of the crystals was reinforced by means of sintering.

• 한국세라믹학회지
• /
• 제33권1호
• /
• pp.56-64
• /
• 1996

A large amount of papers about the cubic-to-tetragonal phase transition the ferroelectric domain structures of the BaTiO3 were already reported but there exist still some needs to observe the domain behaviors directly. In this study the domain structures of the tinned plates prepared from ta single crystal grown by the TSSG technique were observed using a polarizing microscope TE and X-ray topography. The spatial relation be-tween the orientation states of domains was investigated and the effects of external stresses and electric fields on the behaviors of ferroelectric and ferroelastic domains were studied. All the 90$^{\circ}$walls cut off in the crystal are the wedge shaped lamellar domains and all the straight boundaries in the observed domain patte군 can be interpreted as the head-to-tail 90$^{\circ}$walls. The irregular overlapped boundaries commonly observed by using a polarizing microscope and X-ray topography are complex combinations of well-known 90$^{\circ}$walls and are domain walls were predominant and were stabilized after surface polishing. In the paraelectric phase region the domain walls vanished but the residual surface strain patterns could be seen at the same positions of the stabilized 90$^{\circ}$a-a walls in the tetragonal phase region, These stabilized walls resulted from the surface strain had a memory effect in domain formation during the repeated phase transitions and could notr be affected by an external electtric field.

• 한국세라믹학회지
• /
• 제33권2호
• /
• pp.228-234
• /
• 1996

강유전성 BaTiO3의 분역 구조를 이해하는 것은 폴링과정에 있어서 대단히 중요하면 대부분의 BaTiO3 세라믹스에서 흔히 발견되는 구조 쌍정 계면에서의 배향관계는 아직까지 보고된 바 없다. 본 연구에서는 {111} 쌍정을 이루고 있는 길정시편을 이용하여 편광현미경하에서 분역구조를 관찰하고, 열처리에 의하여 상전이되는 동안 {111} 쌍정과 강유전성 분역의 거동을 현미경하에서 직접적으로 관찰하였다. {111} 쌍정면 암측으로 대칭적 분역구조가 발될되며, 그 배열 형태는 'V'자 모양과 수직하게 관통하는 것처럼 직선 모양의 두가지 형으로 분류된다. 열처리에 의하여 새로운 분역구조가 형성될때 {111} 쌍정면 주위에서는 대칭적 관계를 유지하면서 분역이 발달되며, 분역형성에 기인하는 표면변형도 {111} 쌍정에 대하여 항상 대칭적으로 발달된다. 이는 {111} 계면에서도 분극반향이 바뀌어지며 "머리-꼬리"의 전지적 안정성의 배향관계를 유지하는 것으로 설명할 수 있다.