• 제목/요약/키워드: Bar Cutting

검색결과 90건 처리시간 0.022초

초고압수에 의한 화강석절삭에 대한 연구 (A study on the slot cutting in granite by high speed water jet)

  • 선우춘;최병희
    • 터널과지하공간
    • /
    • 제4권2호
    • /
    • pp.92-101
    • /
    • 1994
  • Water jet has been employed in extraacton of minerals for many years but the applications of low pressure jent s ar emodfined to some fields. With increasing strength of equipment it is possible to consider the use of high speed water jets for cutting hard rock. The high speed water jet technology is applied to various engineering fiels such as precessing rocks, quarrying rocks, mechanical fracturing as wel as rock excavation under the sea. For slot cutting in rocks with high speed water jets it is necessary to establish the empirical formula for estiamation of the cutting depth. The cutting depth is influenced by cutting parameters such as driving pressure, traverse speed, standoff distance, and shape and diameter of nozzel. Tests were carried out with a variety of cutting parameters on three types of granite. Nozzle pressures ranged from 1,200 to 2,800 bar, traverse speeds from 0.45 to 10.38 cm/min, standoff distances from 4.5 to 13.5 mm, and three types of nozzle diameter were used.

  • PDF

취성재료의 가공시 절삭날이 표면거칠기에 미치는 영향 (The Effect of Cutting Edge on the Surface Roughness In Cutting Brittle Materials)

  • 김주현
    • 한국정밀공학회지
    • /
    • 제13권1호
    • /
    • pp.53-61
    • /
    • 1996
  • A clear understanding of the surface formation mechanism due to cutting is very important to help produce a good quality surface. Much of the roughness along the length of a bar being cut in a lathe can be explained in terms of macroscopic tool shape and feed rate. However, the roughness along the direction of cutting requires a different explanation. The formation of surface roughness is a problem in flow and fracture of materials in the vicinity of the tool edge. On a microscopic scale the cutting edge is rounded because it is impossible to grind a perfectly sharp cutting edge. Even if a perfectly sharp cutting edge were obtained it would soon become dull as a result of rapid breakdown and wear of the cutting edge. A research project is proposed in which in the main object is to model the surface formation mechanism due to cutting. The tool was assumed to be dull, that is, its edge has a finite radius. In order to study the effect of the radius of cutting edge on the surface formation, tools having different cutting edges were used. For orthogonal cutting experiment, cast iron and glass were chosen as brittle materials. Plowing forces acting in the cutting edge were estimated and its effect on the surface roughness was studied by observing the machined surface using optical microscope.

  • PDF

전기분전반용 블록형 부스 바의 구조 설계 연구 (The Structural Design of the Bus-bar block type of electrical switch boards)

  • 권영민;황찬규;김근호;한희
    • 한국산학기술학회논문지
    • /
    • 제17권2호
    • /
    • pp.378-385
    • /
    • 2016
  • 전기 분 배전반의 내부 회로 인 부스 바는 충전부의 노출로 인해 전기 사고의 원인이 되며 이로 인한 감전 사고와 단락 사고가 발생된다. 또한 동물 및 이물질 침투로 인한 전기 화재 사고가 발생되는 원인이 되기도 한다. 또한 확장이 불가능한 구조로 무리하게 연결하여 사용하므로 접촉 저항 증가 발생으로 과열 사고를 유발시키기도 하며, 절단과 절곡 등의 제조 공정상의 어려움을 가지고 있기 때문에 주문생산방식을 택할 수밖에 없는 현실이며, 긴급전기 사고 발생시 복구하는데 지연되는 원인이 되기도 한다. 본 논문에서는 이와 같은 문제점을 개선하기 위해서 분 배전반의 모선을 절단하여 개별 블록으로 절연 난연 케이스와 격벽 구조화로 안전성을 높여 모듈 블록화 하였으며, 확장성과 유연성을 구현하였으며, 쉽게 확장이 가능한 구조이며, 또한 쉽게 분 배전반을 조립할 수 있다는 것이며, 이와 같이 전기적 위험 요소를 제거한 전기 분 배전반의 내부 구조는 블록형 부스 바 구조를 가지고 메인차단기와 분기차단기간의 회로 형성 구현 방식의 분 배전반를 제안하고 공인시험기관의 시험을 통해 그 유용성을 입증 하였다.

시뮬레이션과 실험에 의한 산소절단기 절단시 철근의 수열온도 분포 (Heated temperature and Range of the Oxy-acetylene Cutting Reinforcing Bar by Simulation and Experiment)

  • 김봉주;김재훈;조병후
    • 한국방재학회 논문집
    • /
    • 제8권2호
    • /
    • pp.1-5
    • /
    • 2008
  • 본 연구는 상온에서 산소절단기로 철근의 절단시 절단부위로 부터의 고온수열범위와 수열온도를 측정하고 시뮬레이션 결과와 비교함으로써 현장에서 산소절단기를 사용한 철근절단의 가능성을 파악하는 것을 목적으로 하며 그 결과는 다음과 같다. 1. 산소절단기로 철근을 절단하는 경우 절단 부위로부터 1 cm 떨어진 위치의 수열온도는 $700^{\circ}C{\sim}1000^{\circ}C$의 범위에 있으나, 절단부위로부터 2cm떨어진 위치의 수열온도는 200$^{\circ}C$를 넘지 않는 것으로 나타났다. 2 각 직경, 종류별로 철근의 수열온도 분포를 시뮬레이션한 결과 산소 절단시험와 유사한 절단 거리에 따른 온도 분포를 보임으로서 철근 절단 거리에서 2cm 정도의 여유를 갖고 절단할 경우에는 고온 수열에 따른 취성변화가 발생되지 않는다.

복합재료 보링바의 동적 특성에 관한 연구 (A Study on the Dynamic Characteristics of the Composite Boring Bar)

  • 황희윤;김진국;이대길
    • 한국복합재료학회:학술대회논문집
    • /
    • 한국복합재료학회 2003년도 춘계학술발표대회 논문집
    • /
    • pp.206-210
    • /
    • 2003
  • Machining of deep holes with conventional boring bars frequently induce chatter vibration because of their low dynamic stiffness which is defined as the product of static stiffness and damping of conventional boring bar materials. In addition, the specific stiffness ($E/{\rho}g$) of boring bars is more important than the static stiffness to increase the fundamental natural frequency of boring bars in high speed machining. Therefore, boring bar materials should have high static stiffness and high damping as well as high specific stiffness. The best way to meet requirements is to employ fiber reinforced composite materials for high speed boring bars because composite materials have high static stiffness, high damping and high specific stiffness compared to conventional boring bar materials. In this study, the dynamic characteristics of carbon fiber epoxy composite boring bars were investigated. From the metal cutting test, it was found that the chatter was not initiated up to the ratio of length to diameter of 10.7 at the rotating speed of 2,500 rpm.

  • PDF

BIM 기반 형상코드를 이용한 기둥 철근길이 자동 산정 기초 연구 (A Basic Study of Automatic Rebar Length Estimate Algorithm of Columns by Using BIM-Based Shape Codes Built in Revit)

  • 오진혁;김선국
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2023년도 봄 학술논문 발표대회
    • /
    • pp.21-22
    • /
    • 2023
  • In reinforced concrete constructions, reinforcing bar generates more CO2 per unit weight than other construction materials. In particular, cutting and bending rebar is the main source of rebar waste in the construction industry. Rebar-cutting waste is inevitable during the construction of a reinforced concrete structure since the rebar is not manufactured as designed. Large amounts of waste can be avoided by utilizing optimal cutting patterns and schedules. This research provides a fundamental analysis of the automatic calculation of column rebar length using BIM-based shape codes to minimize cutting waste to near zero. By employing this approach in practice, it is possible to minimize the rate of rebar-cutting waste, reduce costs, shorten construction duration, and reduce CO2 emissions. In addition, the development of this research will serve as a clue for the development of BIM-based rebar layout automation algorithms.

  • PDF

고변형률 압축 하중에서 쾌삭 황동과 황동의 동적 변형 거동 특성 (Dynamic Compressive Deformation Characteristics of Free-Cutting Brass And Yellow Brass at High Strain Rates)

  • 이억섭;김경준;이종원
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2003년도 춘계학술대회
    • /
    • pp.107-112
    • /
    • 2003
  • Mechanical properties of the materials used for transportations and industrial machinery under high strain rate loading conditions such as high impact loading are required to provide appropriate safety assessment to varying dynamically loaded mechanical structures. The Split Hopkinson Pressure Bar(SHPB) technique with a special experimental apparatus can be used to obtain the material behavior under high strain rate loading conditions. In this paper, the dynamic deformation behavior of a brass under both high strain rate compressive loading conditions has been determined using the SHPB technique.

  • PDF

철근 가스압접의 접합조건에 대한 연구 (A Study on the Weld Condition of Gas Pressure Welding in Steel Bars)

  • 이철구;서성원;채병대;남복현
    • 한국공작기계학회논문집
    • /
    • 제10권6호
    • /
    • pp.57-62
    • /
    • 2001
  • Recently, it has increased that the importance of gas pressure weldment of steel bars in large construction bars. But there has hardly been any studies about it. Therefore we need more research. SD40 steel bar (32mm in diameter) which has been practically used at construction sites are tested about tension, bonding, fatigue, a macro structure and micro structure at foil gitudinal section and hardness to fed out the mechanical property and best welding ranges in some cases of mechanical cut and gas cut before gas pressure welded. It is that a gas-pressure welded zone of steel bar where was cleaned of impurities in way of two-upsetted method is more excellent bending and tension property than the regulation of KD D 0244. Also gas cut bars gained hardness from the heat affected zone so. In conclusion, to improve the weldability of steel bars, it is considered best to clean mechanically cut sutra- faces and then weld them by a method of 2 step upset way.

  • PDF

연속계 해석에 의한 보오링바의 비선형 동적 거동

  • 박수길;강명창;김정석
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 1993년도 춘계학술대회 논문집
    • /
    • pp.137-141
    • /
    • 1993
  • In the case of a boring bar, the vibration amplitude is generallylarge due to its high slenderness. The boring bat is then modelled as a cantilever with dynamic force acting at the free end and a generalized model of nonlinear continous system is obtained. The Analysis of model is conducted for the specific case with a zero side cutting edge angle. The dynamic behaviour is investigated for machining processes in which the the overlap factor of regenerative effect is considered. The vibration characteristics of boring bar depth of cut rather than feed rate in given slenderness.

Outgas 분석을 통한 MLCC Bar 변형률 측정 (Experimental Study on the Deformation of MLCC Compressed Bar by Quantitative Analysis for Outgas)

  • 김민주;김종윤;정기호;박창식
    • 한국전기전자재료학회논문지
    • /
    • 제23권6호
    • /
    • pp.458-463
    • /
    • 2010
  • MLCC (multi-layer ceramic capacitor) is usually fabricated by lamination of predetermined number of single layers. Often, the state of MLCC before sintering is called the green state, whose strength comes from the adhesion between the dielectric material and the polymer binder. Therefore the lamination of a single layer before sintering can be easily deformed by environment due to the relatively lower strength. After the compression process, which helps single sheets cohereto with adjacent sheets, the MLCC green bar is preheated to resolve the probable internal stress. Unfortunately, unexpected deformation after preheating resulted in problems during cutting of the MLCC green bar. In this study, one of 2 primary hypotheses which were proposed to resolve the unexpected deformation after preheating was examined by quantitative experiment with GC/MS (gas chromatograpy/mass spectrometer). The proportion of deformation caused by DOP evaporation, which was primarily evaporated componet during preheating, to the total deformation of the MLCC green bar was found to be 53%.