• Proceedings of the IEEK Conference
• /
• 2003.07e
• /
• pp.2144-2147
• /
• 2003

Objective quality measurement schemes that incorporate properties of the human auditory system. The basilar membrane (BM) acts as a spectrum analyzer, spatially decomposing the signal into frequency components. Filterbanks were used to complementing the linearity of BM. Each filterbank is an implementation or the Equivalent rectangular Bandwidth (ERB), gammachirp function. This filterbank is level-dependent asymmetric compensation filters. And for the validation of the auditory model, we calculate the calculated perceived difference(CPD).

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.444-446
• /
• 1995

This paper deals with semisphere-type sensor fo measuring the electric field waveforms by lightning discharges. The theoretical principle and design rule of the device are introduced, and also the calibration and application investigations are carried out. From the calibration experiments, the frequency bandwidth of the semisphere-type electric field measuring device ranges from 200 [Hz] to 1.56 [MHz], and the sensitivity of sensor is 0.96 [mV/V/m]. The electric field waveforms produced by lightning discharges were observed for June and August 1995. It is shown that the electric field waveforms produced at the distance of more than 50 [km] include only radiation component.

• Proceedings of the KSME Conference
• /
• 2000.11a
• /
• pp.693-698
• /
• 2000

Aspects of classical information theory, such as rate distortion theory, investigate how to encode and decode information from an independently identically distributed source so that the asymptotic distortion rate between the source and its quantized representation is minimized. However, in most natural dynamics, the source state is highly corrupted by disturbances, and the measurement contains the noise. In recent coder-estimator sequence is developed for state estimation problem based on observations transmitted with finite communication capacity constraints. Unlike classical estimation problems where the observation is a continuous process corrupted by additive noises, the condition is that the observations must be coded and transmitted over a digital communication channel with finite capacity. However, coder-estimator sequence does not provide such a quantitative analysis as a variance for estimation error. In this paper, under the assumption that the estimation error is Gaussian distribution, a variance for coder-estimation sequence is proposed and its fitness is evaluated through simulations with a simple example.

• Proceedings of the KAIS Fall Conference
• /
• 2006.05a
• /
• pp.294-297
• /
• 2006

Measurement of network traffic have shown that the self-similarity is a ubiquitous phenomenon spanning across diverse network environments. In previous work, we have explored the feasibility of exploiting the long-range correlation structure in a self-similar traffic for the congestion control. we show that a multiple time scale TCP endows the underlying feedback control with proactivity by bridging the uncertainty gap associated with reactive controls which is exacerbated by the high delay-bandwidth product in broadband wide area networks. Third, we investigate the influence of the three traffic control dimensions-tracking ability, connection duration, and fairness-on performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.9A
• /
• pp.2165-2172
• /
• 1998

Existing premises telecommucation wiring ad been installed for efficient telephone service. But premises wiring is currently ready to be reused as media for wideband digital services and Fiber-to-the-curb architecture. Electrical properties of premises wiring link have not characateized above frequencies for voice service. Accurte measurement of these characteristics are exssential for studies fof wideband ditital transmission system. On the other hand, the transmission qualities of premises wiring have been known to be worst in telecommunications access networks. So the knowledge of premises wiring sturucture as well as electrical properties is needed to improve the performance of premises wiring. In this paper, the structure of premises wiring is described in detail and electrical characteristics (characteristic impedance, SRL, attnuation, NEXT) about premises cables and stelecommucations link of representative apartment complex sare measured and naalyzed ove r16MHz range which is UTP Cat3 bandwidth.

• Journal of electromagnetic engineering and science
• /
• v.11 no.2
• /
• pp.122-127
• /
• 2011

A general analysis of an aperture-coupled vertically mounted strip antenna is presented to examine its circuit characteristics. Based on the present analysis, an equivalent circuit model is developed, and an analytic or semi-analytic evaluation of the related circuit element values is described. The effects of structure parameters on the antenna characteristics were studied with the developed equivalent circuit, and the design curves were obtained. To check the validity of the proposed analysis and design theory, two C-band antennas (5.0 GHz and 4.5 GHz) were designed and fabricated. Their computed characteristics, derived from the proposed network analysis, were compared with the measurement and simulation results. The error of the current model in predicting the operating center frequency was less than 0.50 %. In addition, the observed bandwidth was found to be comparable to the conventional microstrip antennas. All the results fully validated the efficiency and accuracy of the proposed analysis and network model.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.12
• /
• pp.1075-1078
• /
• 2002

This paper describes on the design structure and development of temperature stable strip-line function isolator operating In above resonance mode. Temperature characteristics of isolator depend on magnet, YIG(Yttium Iron Garnet) ferrite, and conductor etc. These require temperature stability and possible methods of compensation for the temperature dependent effects. In this paper, the analysis and measurement of the temperature characteristics were carried out for the material isolator prototype. The bandwidth of isolator was expended and the frequency shift at center was reduced in the temperature range of -20∼80$\^{C}$.

• Journal of the Optical Society of Korea
• /
• v.13 no.4
• /
• pp.423-427
• /
• 2009

The results of the experimental and theoretical studies conducted on terahertz filtering using two parallel-plate waveguides (PPWGs) are presented herein. The first PPWG with 355 ${\mu}m$ plate separation generates 4 THz bandwidth TM modes ($TM_0,\;TM_2,\;and\;TM_4$), whereas the second PPWG with 100 ${\mu}m$ plate separation operated the THz filter for the generated TM modes with 1.5 THz cutoff frequency. The outgoing THz wave of the two PPWGs was truncated until 1.5 THz, and the system was operated using a high-pass THz filter. The absorption and dispersion of the combined TM and TE modes for the filtering system were calculated. The theoretical calculation and measurement results for the cutoff and oscillation frequency in the spectrum domain agreed well.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.841-847
• /
• 2009

This paper describes the propagation characteristics of acoustic signals as a function of distance from the location of partial discharge(PD) occurrence to analyze correlation between discharge magnitude and acoustic signal in insulation oil. To measure small acoustic signals produced by PD, we fabricated an amplifier and simulated PD at a needle-plane electrode system set in insulation oil. The amplifier has the gain of 40 dB and the frequency bandwidth of 1.6 kHz$\sim$1.6 MHz. These are enough characteristics for the measurement of acoustic signals. After a comparative calibration experiment by a standard pulse generator and a coupling capacitor, we analyzed the propagation characteristics of acoustic signals in insulation oil.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.4 no.1
• /
• pp.33-36
• /
• 2009

Incremental converters provide a solution for such measurement applications, as they retain most of the advantages of conventional ${\Delta}{\Sigma}$ converters, and yet they are capable of offset-free and accurate conversion. Most of the previous research on incremental converters was for single-channel and dc signal applications, where they can perform extremely accurate data conversion with more than 20-bit resolution. In this paper, a design technique for implementing multi-channel incremental data converters to convert narrow bandwidth ac signals is discussed. It incorporates the operation principle, topology, and digital decimation filter design. The theoretical results are verified by simulation results.