• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.2B
• /
• pp.144-156
• /
• 2003

Internet/Intranet has been continuously enhanced by new emerging IP technologies such as differentiate service(DiffServ), IPSec(IP Security) and MPLS(Multi-protocol Label Switching) traffic engineering. According to the increased demands of various real-time multimedia services, ISP(Internet Service Provider) should provide enhanced end-to-end QoS(quality of service) and security features. Therefore, Internet and Intranet need the management functionality of sophisticated traffic engineering functions. In this paper, we design and implement the performance management functionality for the guaranteed end-to-end QoS provisioning on MPLS-based VPLS(Virtual Private LAN Service). We propose VPLS OAM(Operation, Administration and Maintenance) for efficient performance management. We focus on a scheme of QoS management and measurement of QoS parameters(such as delay, jitter, loss, etc.) using VPLS OAM functions. The proposed performance management system also supports performance tuning to enhance the provided QoS by re-adjusting the bandwidth of LSPs for VPLS. We present the experimental results of performance monitoring and analysis using a network simulator.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.1
• /
• pp.331-337
• /
• 2015

A novel fully-printed microstrip antenna with negative first resonance and dual polarization is proposed. The radiator is printed on the 1-layer substrate instead of multilayers. The -1st resonance results from a composite right- and left-handed(CRLH) structure that has a circumferentially interlocked gap capacitively coupling a patch with a shorted-ring. This compact antenna is provided with a dual-polarization capability by creating two orthogonal linear polarizations in one body with coaxial feeds. The design is carried out by doing full-wave EM field simulation which is compared with the measurement of the fabricated antenna prototype. The measured results give the gain of 5 dBi and the efficiency of 78% at the -1st resonance mode as the center frequency of a downlink channel of the bandwidth over 20 MHz with 29 dB polarization isolation for mobile communication.

• Proceedings of the IEEK Conference
• /
• 2003.07c
• /
• pp.2753-2756
• /
• 2003

A convenient, tunable loop-gain negative impedance circuit that increases input impedance of a front-end in a bioimpedance measurement has been proposed. Since the proposed circuit comprises wide-band operational amplifiers, selecting operational amplifiers is easy, while an operational amplifier of proper bandwidth should be chosen to use conventional circuit. Also, since loop-gain can be controlled by a feedback resistor connected serially with a feedback capacitor, loop-gain is tunable with a potentiometer. The input impedance of the proposed circuit is two times larger than that of the conventional circuit. Furthermore, closed loop phase response of the proposed circuit is better than that of the conventional circuit or without a negative capacitance circuit. The implemeted, proposed circuit showed stable operation and a zero input capacitance.

• International journal of advanced smart convergence
• /
• v.3 no.2
• /
• pp.14-17
• /
• 2014

Precision agriculture relies on information technology, whose precondition is providing real-time and accurate information. It depends on various kinds of advanced sensors, such as environmental temperature and humidity, wind speed, light intensity, and other types of sensors. Currently, it is a hot topic how to collect accurate information, the main raw data for agricultural experts, monitored by these sensors timely. Most existing work in WSNs addresses their fundamental challenges, including power supply, limited memory, processing power and communication bandwidth and focuses entirely on their operating system and networking protocol design and implementation. However, it is not easy to find the self-localization capability of wireless sensor networks. Because of constraints on the cost and size of sensors, energy consumption, implementation environment and the deployment of sensors, most sensors do not know their locations. This paper provides maximum likelihood estimators for sensor location estimation when observations are time-of arrival (TOA) range measurement.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2005.11a
• /
• pp.35-38
• /
• 2005

In this paper, a wideband balun of tapered structure using planar microstrip is desigde ad analyzed. The balun structure was fabricated on a Teflon substrate with a thickness of 0.8mm and relative dielectric constant ${\varepsilon}_r$ of 2.5. Two back-to back CPW-to-CPS transitions were simulated and optimized using HFSS. A movel plaar balun using tapered structure of microstip to CPW is suggested and designed. The measurement result, the bandwidth for a reflection coefficient better than -10dB of the balun is 2GHz to 8GHz. The planar balun can improved the performance of wide band spiral antenna.

• Journal of electromagnetic engineering and science
• /
• v.13 no.1
• /
• pp.34-37
• /
• 2013

This paper presents a novel ultra-wideband (UWB) antenna that rejects narrow and broad bands and is suitable for wireless communications. The base of the proposed antenna has a circular patch that can cover the UWB frequency range (3.1~10.6 GHz). The interference issues caused by co-existence within the UWB operation frequency are overcome by a design that uses a parallel-coupled asymmetric dual-line with a circular monopole antenna. The proposed antenna showed a stable radiation pattern, realized gain and reflection coefficient lower than -10 dB across the UWB operation bandwidth except for 5.15~5.85 GHz and 7.25~8.4 GHz. The fabrication, simulation, and measurement results obtained for the proposed antenna were in good agreement with the expected values.

• Journal of electromagnetic engineering and science
• /
• v.16 no.4
• /
• pp.241-247
• /
• 2016

This paper proposes the design and measurement of a 6-18 GHz front-end receiver module that has been combined into a one- channel output from a two-channel input for electronic warfare support measures (ESM) applications. This module includes a limiter, high-pass filter (HPF), power combiner, equalizer and amplifier. This paper focuses on the design aspects of reducing the noise figure (NF) and matching the phase and amplitude. The NF, linear equalizer, power divider, and HPF were considered in the design. A broadband receiver based on a combined configuration used to obtain low NF. We verify that our receiver module improves the noise figure by as much as 0.78 dB over measured data with a maximum of 5.54 dB over a 6-18 GHz bandwidth; the difference value of phase matching is within $7^{\circ}$ between ports.

• Journal of electromagnetic engineering and science
• /
• v.18 no.1
• /
• pp.46-51
• /
• 2018

In this paper, a planar printed hybrid short/open-ended slot antenna with capacitive coupling feed strips is proposed for hepta-band mobile applications. The proposed antenna is comprised of a slotted ground plane on the top plane and two capacitive coupling feed strips with a chip inductor on the bottom plane. At the low frequency band, the short-ended long slot fed by strip 1 generates its half-wavelength resonance mode, whereas the T-shaped open ended slot fed by strip 2 generates its quarter-wavelength resonance mode for the high frequency band. The antenna provides a wide bandwidth covering GSM850/GSM900/DCS/PCS/UMTS/LTE2300/LTE2500 operation bands. Moreover, the antenna occupies a small volume of $15mm{\times}50mm{\times}1mm$. The operating principle of the proposed antenna and the simulation/measurement results are presented and discussed.

• MALSORI
• /
• no.49
• /
• pp.63-75
• /
• 2004

Most existing telephone speech transmitted in current public networks is band-limited to 0.3-3.4 kHz. Compared with wideband speech(0-8 kHz), the narrowband speech lacks low-band (0-0.3 kHz) and high-band(3.4-8 kHz) components of sound. As a result, the speech is characterized by the reduced intelligibility and a muffled quality, and degraded speaker identification. Bandwidth extension is a technique to provide wideband speech quality, which means reconstruction of low-band and high-band components without any additional transmitted information. Our new approach considers to exploit harmonic synthesis method for reconstruction of low-band speech over the CELP coded speech. A spectral distortion measurement and listening test are introduced to assess the proposed method, and the improvement of synthesized speech quality was verified.

• Proceedings of the Korean Information Science Society Conference
• /
• 2008.06a
• /
• pp.170-173
• /
• 2008

가용 대역폭을 개인이 점유할 수 있는 P2P 환경에서는 고용량의 멀티미디어 데이터를 실시간으로 전송할 수 있다. 실시간 전송에서 가장 중요한 것은 가용 대역폭을 빠르고 정확하게 측정하는 것이며, 이를 제대로 측정하지 못 할 경우 네트워크에서 혼잡이 발생하여 멀티미디어 품질에 큰 영향을 미치게 된다. 본 논문에서는 자가 혼잡 유발을 이용한 대역폭 측정 방법인 Pathload를 개선하여 실제 네트워크 환경에서 빠르고 정확하게 가용 대역폭을 측정하는 기법을 제안한다. 실시간 전송의 특징을 감안하여 대역폭이 떨어지는 순간을 빠르고 정확하게 측정하여 끊어짐 없이 전송할 수 있도록 하였다.