• Journal of Institute of Control, Robotics and Systems
• /
• v.3 no.1
• /
• pp.77-88
• /
• 1997

Fieldbus is the lowest level communication network in factory automation and process control systems. Performance of factory automation and process control systems is directly affected by the data delay induced by network traffic. Data generated from several distributed field devices can be largely divided into three categories: sporadic real-time, periodic real-time and non real-time data. Since these data share one fieldbus network medium, the limited bandwidth of a fieldbus network must be appropriately allocated to the sporadic real-time, periodic real-time and non real-time traffic. This paper introduces a new fieldbus design scheme which allocates the limited bandwidth of fieldbus network to several different kinds of traffic. The design scheme introduced in this study not only satisfies the performance requirements of application systems interconnected into the fieldbus but also fully utilizes the network resources. The design scheme introduced in this study can be applicable to cyclic service protocols operated under single-service discipline. The bandwidth allocation scheme introduced in this study is verified using a discrete-event/continuous-time simulation experiment.

• Journal of Broadcast Engineering
• /
• v.23 no.6
• /
• pp.813-823
• /
• 2018

UHD content is characterized by higher bandwidth requirements to provide seamless playback. The existing HTTP adaptive streaming scheme periodically requests video segment of lower quality than the available bandwidth in the steady state. In the steady state, the On-Off pattern is repeated due to the difference of the available bandwidth and the encoding rate of the content. And the repeated Off interval is causing the problem that can not efficiently use the available bandwidth. In the wireless environment where the delay and loss rate are higher with large bandwidth fluctuations, this problem is exacerbated because the available bandwidth is estimated inaccurately. Therefore, in this paper, we propose a segment scheduling scheme for efficient bandwidth utilization of UHD contents streaming in wireless environment. Proposed scheme is a group segment that simultaneously reqeusts multiple segments in one request message in order to reduce frequency of OFF interval. Through simulation, Our scheme improves bandwidth utilization.

• International Journal of Internet, Broadcasting and Communication
• /
• v.12 no.4
• /
• pp.166-172
• /
• 2020

Video streaming application such as YouTube is one of the most popular mobile applications. To adjust the quality of video for available network bandwidth, a streaming server provides multiple representations of video of which bit rate has different bandwidth requirements. A streaming client utilizes an adaptive bit rate scheme to select a proper video representation that the network can support. The download behavior of video streaming client player is governed by several parameters such as maximum buffer size. Especially, the size of the maximum playback buffer in the client player can greatly affect the user experience. To tackle this problem, in this paper, we propose the maximum buffer size optimization according to available network bandwidth and buffer status. Our simulation study shows that our proposed buffer size optimization scheme successfully mitigates playback stalls while preserving the similar quality of streaming video compared to existing ABR schemes.

• Journal of electromagnetic engineering and science
• /
• v.8 no.2
• /
• pp.41-46
• /
• 2008

A bandwidth and power efficient high speed ubiquitous sensor network(USN) for realizing a ubiquitous society is a great challenge for researcher community. In this paper we incorporate a cooperative transmission protocol within a special type of multi-code modulation to meet these requirements. Multi-code(Mc) modulation has been developed for high-speed data transmission over wireless channels. We proposed a new class of orthogonal codes for multi-code modulation which is an orthogonal subset of orthogonal codes(OSOC). Our proposed OSOC structure allows us to use only one relay to cooperate M nodes that effectively reduces the bandwidth and power requirement. This protocol is similar to spread-spectrum(SS) technique that can reduce both broad and narrow band jamming.

• Journal of Information Processing Systems
• /
• v.4 no.2
• /
• pp.41-52
• /
• 2008

In this paper, we discuss a novel reservation-based, asynchronous MAC protocol called 'Multi-rate Multi-hop MAC Protocol' (MMMP) for multi-hop ad hoc networks that provides QoS guarantees for multimedia traffic. MMMP achieves this by providing service differentiation for multirate real-time traffic (both constant and variable bit rate traffic) and guaranteeing a bounded end-to-end delay for the same while still catering to the throughput requirements of non real time traffic. In addition, it administers bandwidth preservation via a feature called 'Smart Drop' and implements efficient bandwidth usage through a mechanism called 'Release Bandwidth'. Simulation results on the QualNet simulator indicate that MMMP outperforms IEEE 802.11 on all performance metrics and can efficiently handle a large range of traffic intensity. It also outperforms other similar state-of-the-art MAC protocols.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2010.11a
• /
• pp.1482-1484
• /
• 2010

A new TCP protocol can succeed for large bandwidth delay product when it meets network bandwidth utilization efficiency and fair sharing. We introduce a novel congestion control algorithm which employs queueing delay information in order to calculate the amount of congestion window increment in increase phase, and reduces congestion window to optimal estimated bound as packet loss occurs. Combination of such methods guarantees that the proposal utilizes fully network bandwidth, recovers quickly from packet loss in wireless link, and preserves fairness for competing flows mixed short RTT and long RTT. Our simulations show that features of the proposed TCP meet the desired requirements.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.6
• /
• pp.1433-1442
• /
• 1997

Algorithm design is needed to optimized bandwidth which satisfy quality of service(QoS) requirements of vary traffic classes for Multimedia service in ATM networks. The diverse flow characteristics e.g., burstiness, bit rate and burst length, have to guarantee the different quality of service(QoS) requirements in Asynchronous Transfer Mode(ATM). The QoS parameter may be measured in terms of cell loss probability and maximum cell dely. In this paper, we consider the ATM networks which the virtual path(vip) concept is implemented by applying the Markov Modulated Deterministic Process method. We develop an efficient algorithm to computer the minimum capacity required to satisfy all the QoS requirements when multiple classes of on-off source are multiplexed on single VP. Using above the result, we propose a simple algorithm to determine the VP combination to achieve the near optimum of total capacity required for satisfying the individual QoS requirements. Numerical results are also presented to demonstrate the performance of the algorithm, when compared to the optimal total capacity required.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.1B
• /
• pp.64-72
• /
• 2004

Multiprotocol Label Switching (MPLS) has been developed as a key technology to enhance the reliability, manageability and overall quality of service of core If networks with connection-oriented tunnel LSP and traffic engineering such as constraint-based routing, explicit routing, and restoration. In this paper, we propose a control bandwidth borrowing scheme that maximizes the utilization of tunnel LSPs or physical links by an extension to the RSVP-TE label distribution protocol. MPLS-based core switching network and VPN services rely on the establishment of connection-oriented tunneled LSPs that are configured or predefined by network management systems. The mechanism of network management system varies from (i) a relatively static LSP establishment accounting, to (ii) a dynamic QoS routing mechanisms. With the use of hierarchical LSPs, the extra bandwidth that is unused by the trunk (outer) LSPs should be fully allocated to their constituent end-to-end user traffic (inner) LSPs in order to maximize their utilization. In order to find out the unused extra bandwidth in tunnel LSP or physical link and redistribute these resources to constituent LSPs, we expend the functionality of RSVP-TE and the found unused extra bandwidth is redistributed with a weight-based recursive redistribution scheme. By the extended RSVP-TE and proposed recursive redistributed scheme, we could achieve the instantaneous maximized utilization of tunnel LSP or physical link suffering from the potential under-utilization problem and guarantee the end-to-end QoS requirements. With the proposed scheme, network manager can manage more effectively the extra available bandwidth of hierarchical LSPs and maximize the instantaneous utilization of the tunneled LSP resources.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.2
• /
• pp.228-235
• /
• 2002

Differentiated services network (DiffServ) aims to provide the same service to a group of connections that have similar Quality of Service requirements. One of the essential function to realize DiffServ is the traffic conditioning mechanisms to support the required services. The paper proposes the enhanced traffic conditioning mechanism which alleviates a bias against reserved bandwidth size. The simulation results show that the new mechanism is rather insensitive of size of reserved bandwidth, and performs better both in terms of throughput assurance and fair distribution of excess bandwidth in case of well-provisioned and over-provisioned network environment.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1998.11a
• /
• pp.408-413
• /
• 1998

Electromagnetic wave absorbers for anechoic chamber are needed to broaden the useful frequency bandwidth, reduce the thickness, and decrease the weight. There are various absorbers proposed for the above conditions, but they could not decisively solve it the alone requirements. The Electromagnetic wave absorber made by a conventional ferrite tile has, for example, broadened the useful frequency bandwidth by the way of forming air layer(practically use urethane foam, etc.) on the ferrite tile. Therefore, an air layer is formed between a reflection plate and a sintered Ni-Zn ferrite tile of 7 mm in thickness, which has reflectivity less than -20 dB from 30 MHz to 600 MHz in bandwidth. Accordingly, in this paper, a broadened electromagnetic wave absorber will be designed, which has the reflection characteristics less than -20 dB from 30 MHz to 6000 MHz in the bandwidth. Then we will design a super broadband electromagnetic wave absorber by inserting square Ferrite Cylinders Type with the thickness less than 11 m and with the frequency band from 30 MHz to 6000 MHz under the above tolerance limits. The purpose of this research is on the development of a universal anechoic chamber for measuring radiated electromagnetic wave or immunity of electronic equipments, GTEM-cell, wall material for prevention TV ghost, etc.