• Journal of Ubiquitous Convergence Technology
• /
• v.2 no.2
• /
• pp.59-66
• /
• 2008

In this study, Software Defined Radio (SDR) technology-based digital filterbank architecture applicable to a multiple-channel processing system such as a wireless mobile communication system using Code Division Multiple Access (CDMA) technology is proposed. The technique includes a micro-processor to redesign Finite Impulse Response (FIR) filter coefficients according to specific system information and to download the filter coefficients to one digital Band Pass Filter (BPF) to reconfigure another system. The feasibility of the algorithm is verified by computer simulation and by implementing a multiple-channel signal generator that is reconfigurable to other system profiles, including those of a Wideband Code Division Multiple Access (WCDMA) system and a CDMA system.

• Proceedings of the KIPE Conference
• /
• 2004.07b
• /
• pp.764-768
• /
• 2004

This paper proposed Hybrid Filter for harmonics elimilation on the power line. It's control method is very simple, but its performance is better than the results by passive filter. For the harmonics elimination, we improved the performance of the BPF(Band-pass Filter) with the GIC(Generalize Impedance Converter), and the new hysterisys controller.

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.487-488
• /
• 1995

Broadband Microwave Low Noise Amplifier(LNA) is designed. The matching method using the broadband BPF(BandPass Filter) is introduced in this paper. This method is that the filter having the same reflection coefficient of Microwave GaAs FET in the desired bandwidth is located on the input stage of FET. The Simulated results is obtained that the $S_{21}$ and noise figure in 2.5GHz$\sim$9GHz, band are 8.5dB $\pm$ 1.5dB, 2.5dB $\pm$ 0.3dB respectively.

• Journal of information and communication convergence engineering
• /
• v.15 no.3
• /
• pp.175-181
• /
• 2017

This paper describes the upgrade of an existing wave information retrieval algorithm by employing noise reduction in the pixel domain. Several algorithms for collecting wave information parameters from X-band radar image sequences including the wind field and current velocity have been developed over the past three decades. Using these algorithms, a band-pass filter (BPF) is applied to remove the non-wave contribution from the image spectra after the sea surface current velocity has been computed. However, such BPF designs have been both complex and insufficient in removing undesired components in X-band radar images. For this study, to improve the performance of wave information retrieval, an efficient noise reduction algorithm is incorporated into a regular wave information retrieval process. That is, the proposed algorithm was designed for operation in a more proper manner by effectively removing the undesired components in the pixel domain. Experiment results demonstrate that the proposed algorithm produces very close estimates to the buoy data records under undesirable noise conditions.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.12
• /
• pp.2161-2166
• /
• 2008

This paper deals with a Z-source active power filter(Z-AFU) for mitigation voltage THD(total harmonic distortion) due to voltage harmonic propagation(amplification) in 6.6kv power distribution system. Bus voltage harmonic signal is detected by 60Hz butterworth BPF(band pass filter). As an ESS(energy storage system) of the proposed system, PEM fuel cells(Ballard NEXA, 1.2kw) is employed. Test results based on PSIM(power electronics simulation tool) validate the proposed approach.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.122-123
• /
• 2011

본 논문에서는 분산전원시스템에서 계통의 전력품질 향상 및 분산전원과 계통의 전력흐름(Power flow)을 제어 할 수 있는 대역통과필터(BPF: Band Pass Filter)하나만을 사용하는 분산전원용 저가격 순시전력제어기를 제안한다. 제안된 시스템은 1개의 BPF만을 사용하여 무효전력보상 및 전력흐름을 제어함으로써 복잡한 행렬 연산 없이 순시제어가 가능한 장점으로 고성능 연산장치 또는 곱셈기와 같은 부가회로 없이 회로구성을 할 수 있어 저가격으로 회로구현이 가능하다. 제안된 시스템의 유용성을 확인하기 위해 시뮬레이션을 수행하였다.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.59 no.1
• /
• pp.40-46
• /
• 2010

DC link electrolytic capacitors are widely used in various PWM power converter system, such as adjustable speed driver(ASD) or DC/DC converter. Electrolytic capacitors, which is the most of the time affected by aging effect, plays a very important role for the power electronics system quality and reliability. This objective of this paper is to propose a improvement method to detect the rise of equivalent series resistor(ESR) in order to realize the online failure prediction of electrolytic capacitor for DC link of PWM power converter. The ESR detection scheme is based on the determination of the electrolytic capacitor AC losses calculated from voltage/current measurement using AC coupling. Therefore, the preposed online failure prediction method has the merits of easy ESR computation and circuit simplicity compare with BPF method. Simulation results show the veridity of the proposed on-line ESR estimation method.

• Journal of Sensor Science and Technology
• /
• v.25 no.1
• /
• pp.71-78
• /
• 2016

PPG signal measured by pulse oximeter can measure pulse and the oxygen saturation of arterial blood. But the PPG signal is distorted by finger movement or other movement in the body. To detect pulse from the PPG signal with motion artifact, we use band pass filter(BPF), Independent component analysis(ICA) and nonlinear autocorrelation(NAC). BPF is used to remove DC component and high frequency noise in the PPG signal with motion artifacts. ICA is used to separate pulse signal and motion artifact. However, pulse signal separated by ICA have no choice but to accompany signal distortion because pulse signal and motion artifact are not completely independent. So, we use nonlinear autocorrelation to emphasize the pure pulse signal from the distorted signal.

• Journal of Navigation and Port Research
• /
• v.30 no.5 s.111
• /
• pp.363-367
• /
• 2006

The frequency band $10.5GHz\sim10.7GHz$ provides some of the best angular resolutions using many large and accurate radio telescopes. Developing high performance Bandpass Filter is needed for these equipments to receive low power signals from the space. In this paper, suggests Bandpass Filter for Radio Astronomy equipments. Designed by Microstrip Line for good pass characteristic and suppressing not necessary signals cause of using high frequency. Center frequency is 10.6 GHz and band width is 5% of Center frequency. Manufactured Bandpass Filter is suitable for Radio Astronomy Equipments. Bemuse it matches up to the result by simulate.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.06b
• /
• pp.121-125
• /
• 2006

The frequency band $10.5GHz{\sim}10.7GHz$ provides some of the best angular resolutions that using many large and accurate radio telescopes. Developing high-performanced Bandpass Filter is needed for these equipments receive low power signals from the space. In this paper, Bandpass Filter for Radio Astronomy equipments is proposed. It is designed by Microstrip Line for good pass characteristic and suppressing unwanted signals. Center frequency is 10.6 GHz and band width is 5% of Center frequency. Manufactured Bandpass Filter is suitable for Radio Astronomy Equipments. Because the measured results agree well with the simulation results.