• 한국전기전자재료학회논문지
• /
• 제15권11호
• /
• pp.923-932
• /
• 2002

A stoichiometric mixture of evaporating materials for CdIn$\_$2/S$\_$4/ single crystal thin films was prepared from horizontal furnace. To obtain the single crystal thin films, CdIn$\_$2/S$\_$4/ mixed crystal was deposited on thoroughly etched semi-insulating GaAs(100) substrate by hot wall epitaxy(HWE) system. The source and substrate temperatures were 630 $\^{C}$ and 420 $\^{C}$, respectively. The crystalline structure of single crystal thin films was investigated by the photoluminescence and double crystal X-ray diffraction(DCXD). The carrier density and mobility of CdIn$\_$2/S$\_$4/ single crystal thin films measured from Hall effect by van der Pauw method are 9.01$\times$10$\^$16/ cm$\^$-3/ and 219 ㎠/V$.$s at 293 K, respectively. From the optical absorption measurement, the temperature dependence of energy band gap on CdIn$\_$2/S$\_$4/ single crystal thin films was found to be Eg(T) ＝ 2.7116 eV - (7.74 $\times$ 10$\^$-4/ eV) T$\^$2//(T＋434). After the as-grown CdIn$\_$2/S$\_$4/ single crystal thin films was annealed in Cd-, S-, and In-atmospheres, the origin of point defects of CdIn$\_$2/S$\_$4/ single crystal thin films has been investigated by the photoluminescence(PL) at 10 K. The native defects of V$\_$cd/, V$\_$s/, Cd$\_$int/ and S$\_$int/ obtained by PL measurements were classified as donors or accepters type. And we concluded that the heat-treatment in the S-atmosphere converted CdIn$\_$2/S$\_$4/ single crystal thin films to an optical p-type. Also, we confirmed that In in CdIn$\_$2/S$\_$4/GaAs did not from the native defects because In in CdIn$\_$2/S$\_$4/ single crystal thin films existed in the form of stable bonds.

• 한국세라믹학회지
• /
• 제41권2호
• /
• pp.136-142
• /
• 2004

출발물질로 zinc acetate dihydrate(Zn($CH_3$COO)$_2$$.$2$H_2O$)를 사용하였고, 이 물질을 isopropanol(($CH_3$)$_2$CHOH)-monoethanolamine(MEA:H$_2$NCH$_2$C$H_2O$H) 용액에 용해하여 균일하고 안정한 sol을 만들었다. Sol-gel spin-coating 법에 의해 ZnO 박막을 제조시 예열 온도에 따른 박막의 c-축 배향성과 그 물리적 특성을 조사하였다. c-축으로의 성장은 예열 온도의 변화에 따라 차이를 보였으며. 275$^{\circ}C$에서 예열 후 $650^{\circ}C$에서 최종 열처리한 ZnO 박막은 XRD 측정결과 기판에 수직한 (002) 방향으로 강한 배향성을 나타내었다 200∼30$0^{\circ}C$에서 예열 후, $650^{\circ}C$에서 최종 열처리한 ZnO 박막은 UV-vis측정결과 가시광선 영역에서 온도에 따른 투과도의 변화를 보이지만 평균 85% 이상의 높은 투과도를 보였다. 또한 370nm 부근에서 흡수단을 나타내었으며, 광학적 밴드갭은 약 3.22 eV로 나타났다. 발광방출(PL) 측정결과, 황색(620nm, 2.0 eV)발광이 관찰되어, 무기발광 소자로의 응용 가능성을 나타내었다.

• 한국전기전자재료학회논문지
• /
• 제20권10호
• /
• pp.829-838
• /
• 2007

The stochiometric mix of evaporating materials for the $CdGa_2Se_4$ single crystal thin films was prepared from horizontal furnace. To obtain the single crystal thin films, $CdGa_2Se_4$ mixed crystal was deposited on thoroughly etched semi-insulating GaAs(100) substrate by the Hot Wall Epitaxy (HWE) system. The source and substrate temperature were $630^{\circ}C$ and $420^{\circ}C$, respectively. The crystalline structure of single crystal thin films was investigated by the photoluminescence and double crystal X-ray diffraction (DCXD).The carrier density and mobility of $CdGa_2Se_4$ single crystal thin films measured from Hall effect by van der Pauw method are $8.27{\times}10^{17}\;cm^{-3},\;345\;cm^2/V{\cdot}s$ at 293 K. respectively. The temperature dependence of the energy band gap of the $CdGa_2Se_4$ obtained from the absorption spectra was well described by the Varshni's relation, $Eg(T)\;=\;2.6400\;eV\;-\;(7.721{\times}10^{-4}\;eV/K)T^2/(T+399\;K)$. After the as-grown single crystal $CdGa_2Se_4$ thin films were annealed in Cd-, Se-, and Ga -atmospheres, the origin of point defects of single crystal $CdGa_2Se_4$ thin films has been investigated by PL at 10 K. The native defects of $V_{Cd}$, $V_{Se}$, $Cd_{int}$, and $Se_{int}$ obtained by PL measurements were classified as donors or accepters. We concluded that the heat-treatment in the Cd-atmosphere converted single crystal $CdGa_2Se_4$ thin films to an optical p-type. Also, we confirmed that Ga in $CdGa_2Se_4/GaAs$ did not form the native defects because Ga in single crystal $CdGa_2Se_4$ thin films existed in the form of stable bonds.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.50-50
• /
• 2008

ZnO has been extensively studied for optoelectronic applications such as blue and ultraviolet (UV) light emitters and detectors, because it has a wide band gap (3.37 eV) anda large exciton binding energy of ~60 meV over GaN (~26 meV). However, the fabrication of the light emitting devices using ZnO homojunctions is suffered from the lack of reproducibility of the p-type ZnO with high hall concentration and mobility. Thus, the ZnO-based p-n heterojunction light emitting diode (LED) using p-Si and p-GaN would be expected to exhibit stable device performance compared to the homojunction LED. The n-ZnO/p-GaN heterostructure is a good candidate for ZnO-based heterojunction LEDs because of their similar physical properties and the reproducibleavailability of p-type GaN. Especially, the reduced lattice mismatch (~1.8 %) and similar crystal structure result in the advantage of acquiring high performance LED devices with low defect density. However, the electroluminescence (EL) of the device using n-ZnO/p-GaN heterojunctions shows the blue and greenish emissions, which are attributed to the emission from the p-GaN and deep-level defects. In this work, the n-ZnO:Ga/p-GaN:Mg heterojunction light emitting diodes (LEDs) were fabricated at different growth temperatures and carrier concentrations in the n-type region. The effects of the growth temperature and carrier concentration on the electrical and emission properties were investigated. The I-V and the EL results showed that the device performance of the heterostructure LEDs, such as turn-on voltage and true ultraviolet emission, developed through the insertion of a thin intrinsic layer between n-ZnO:Ga and p-GaN:Mg. This observation was attributed to a lowering of the energy barriers for the supply of electrons and holes into intrinsic ZnO, and recombination in the intrinsic ZnO with the absence of deep level emission.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.145-145
• /
• 2008

High-k materials have been paid much more attention for their characteristics with high permittivity to reduce the leakage current through the scaled gate oxide. Among the high-k materials, $ZrO_2$ is one of the most attractive ones combing such favorable properties as a high dielectric constant (k= 20 ~ 25), wide band gap (5 ~ 7 eV) as well as a close thermal expansion coefficient with Si that results in good thermal stability of the $ZrO_2$/Si structure. During the etching process, plasma etching has been widely used to define fine-line patterns, selectively remove materials over topography, planarize surfaces, and trip photoresist. About the high-k materials etching, the relation between the etch characteristics of high-k dielectric materials and plasma properties is required to be studied more to match standard processing procedure with low damaged removal process. Among several etching techniques, we chose the inductively coupled plasma (ICP) for high-density plasma, easy control of ion energy and flux, low ownership and simple structure. And the $BCl_3$ was included in the gas due to the effective extraction of oxygen in the form of $BCl_xO_y$ compounds. During the etching process, the wafer surface temperature is an important parameter, until now, there is less study on temperature parameter. In this study, the etch mechanism of $ZrO_2$ thin film was investigated in function of $Cl_2$ addition to $BCl_3$/Ar gas mixture ratio, RF power and DC-bias power based on substrate temperature increased from $10^{\circ}C$ to $80^{\circ}C$. The variations of relative volume densities for the particles were measured with optical emission spectroscopy (OES). The surface imagination was measured by scanning emission spectroscope (SEM). The chemical state of film was investigated using energy dispersive X-ray (EDX).

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.399-399
• /
• 2008

Synthesis and characterization of ZnO structure such as nanowires, nanorods, nanotube, nanowall, etc. have been studied to multifunctional application such as optical, nanoscale electronic and chemical devices because it has a room-temperature wide band gap of 3.37eV, large exiton binding energy(60meV) and various properties. Various synthesis methods including chemical vapor deposition (CVD), physical vapor deposition, electrochemical deposition, micro-emulsion, and hydrothermal approach have been reported to fabricate various kinds of ZnO nanostructures. But some of these synthesis methods are expensive and difficult of mass production. Wet chemical method has several advantage such as simple process, mass production, low temperature process, and low cost. In the present work, ZnO nanorods are deposited on ITO/glass substrate by simple wet chemical method. The process is perfomed by two steps. One-step is deposition of ZnO seeds and two-step is growth of ZnO nanorods on substrates. In order to form ZnO seeds on substrates, mixture solution of Zn acetate and Methanol was prepared.(one-step) Seed layers were deposited for control of morpholgy of ZnO seed layers by spin coating process because ZnO seeds is deposited uniformly by centrifugal force of spin coating. The seed-deposited samples were pre-annealed for 30min at $180^{\circ}C$ to enhance adhesion and crystallinnity of ZnO seed layer on substrate. Vertically well-aligned ZnO nanorods were grown by the "dipping-and-holding" process of the substrates into the mixture solution consisting of the mixture solution of DI water, Zinc nitrate and hexamethylenetetramine for 4 hours at $90^{\circ}C$.(two-step) It was found that density and morphology of ZnO nanorods were controlled by manipulation of ZnO seeds through rpm of spin coating. The morphology, crystallinity, optical properties of the grown ZnO nanostructures were carried out by field-emission scanning electron microscopy, high-resolution electron microscopy, photoluminescence, respectively. We are convinced that this method is complementing problems of main techniques of existing reports.

• 전자공학회논문지
• /
• 제51권6호
• /
• pp.71-77
• /
• 2014

본 연구에서는 radio frequency(rf) 마그네트론 스퍼터링 기술을 이용하여 Corning 유리 기판에 증착된 InGaZnO (IGZO) 박막의 광 투과도 특성에 고 에너지 전자빔 조사(high-energy electron beam irradiation (HEEBI))이 미치는 영향을 연구하였다. 저온에서 증착된 IGZO 박막은 공기 중 과 상온 조건에서 0.8 MeV의 전자빔 에너지와 $1{\times}10^{14}-1{\times}10^{16}electrons/cm^2$ dose를 사용하여 HEEBI 처리 되었다. IGZO 박막의 광 투과도는 utraviolet visible near-infrared spectrophotometer (UVVIS)로 측정되었다. HEEBI 처리 된 IGZO/유리 이중층의 총 광 투과도에서 HEEBI 처리된 IGZO 단일막 만의 광 투과도를 분리하는 방법을 상세히 연구하였다. 실험 결과로부터 $1{\times}10^{14}electrons/cm^2$의 적절한 dose로 처리된 HEEBI가 IGZO 박막의 투명도를 극대화시킴을 알 수 있었다. 또한 이렇게 적절한 dose로 처리된 HEEBI가 광학 밴드갭($E_g$)을 3.38 eV에서 3.31 eV로 감소시킴을 알 수 있었다. 이러한 $E_g$의 감소는 적절한 dose로 공기 중 상온에서 처리된 HEEBI가 진공 중 고온에서 처리된 열적 annealing 효과와 유사함을 제시하고 있다.

• 공업화학
• /
• 제24권5호
• /
• pp.537-543
• /
• 2013

본 연구에서는 유기박막태양전지로 적용 가능한 push-pull 구조의 고분자를 합성하여 그 특성을 확인하였다. 전자주개 물질로는 benzodithiophene 유도체를 도입하였고, 전자받개물질은 benzothiadiazole 유도체를 사용하여 Stille coupling 반응으로 poly{4,8-didodecyloxybenzo[1,2-b;3,4-b]dithiophene-alt-5,6-bis(octyloxy)-4,7-di(thiophen-2-yl)benzo[c][1,2,5]-thiadiazole} (PDBDT-TBTD)를 합성하였다. 각 합성 단계별 단량체의 확인은 $^1H-NMR$과 GC-MS를 통해 이루어졌으며, 합성된 conjugated polymer는 GPC, TGA, UV-Vis, cyclic voltammetry를 이용하여 물리적, 광학적 및 전기화학적 특성을 확인하였다. PDBDT-TBTD의 수평균 분자량은 6200이였으며, 초기 분해온도(5% weight loss temperature, $T_d$)값은 $323^{\circ}C$로 측정 되었다. 박막형태에서의 최대 흡수파장은 599 nm이며, 광학적 밴드갭(${E_g}^{opt}$)은 1.70 eV으로 확인되었다. 유기박막태양전지 소자는 ITO/PEDOT : PSS/PDBDT-TBTD : $PC_{71}BM/BaF_2/Ba/Al$ 구조로 제작하였으며, PDBDT-TBTD와 $PC_{71}BM$를 1 : 2 (w/w)의 비율로 블렌딩하여 광활성층으로 사용하였다. 제작된 소자는 solar simulator으로 광전변환효율을 확인하였고, 최대 광전변환효율은 2.1%이었다.

• 공업화학
• /
• 제3권1호
• /
• pp.88-99
• /
• 1992

광 전기분해시 양극으로 사용되는 산화티타늄 반도체 전극의 안정성을 증대시키고 효율향상을 위해서 순수한 티타늄 전극을 양극 산화법, 전기로 산화법, 불꽃 산화법으로 산화 피막을 제조하였으며 In을 Ti와 $TiO_2$소지에 전기도금을 한 후 전기로 산화법으로 혼합 산화물을 제조하였다. 또한 $Al_2O_3$ 와 NiO는 진공증착 방법을 이용하여 Ti 소지위에 증착시킨 후 전기로 산화법을 이용하여 혼합 산화물을 제조하였다. 에너지변환 효율(${\eta}$)은 인가전위에 따라서 다른 값을 갖는데 0.6V로 계산하여 보면 $1200^{\circ}C$의 불꽃으로 2분간 산화시킨 전극이 0.98%로 가장 큰 값을 가졌으며 양극 산화법으로 제조한 전극의 ${\eta}$는 0.14%로 작은 값을 보여 주었다. 한편 $800^{\circ}C$ 전기로에서 10분간 산화시킨 전극의 ${\eta}$는 0.57%로 띠간 에너지는 2.9eV로 나타났다. 한편 In을 Ti 및 $TiO_2$ 소지위에 전기도금시킨 전극의 ${\eta}$는 0.8%였으며 인가전위가 증가함에 따라서 ${\eta}$는 증가하였다. 그러나 $Al_2O_3$와 NiO를 Ti소지위에 진공증착시킨 전극의 ${\eta}$는 다른 전극들에 비해서 가장 낮은 값을 나타내었다.

• 비파괴검사학회지
• /
• 제25권2호
• /
• pp.117-126
• /
• 2005

[ $AgGaS_2$ ] 단결정 박막을 수평 전기로에서 합성한 $AgGaS_2$ 다결정을 증발원으로하여, hot wall epitaxy(HWE) 방법으로 증발원과 기판 (반절연성 -GaAs (100))의 온도를 각각 $590^{\circ}C,\;440^{\circ}C$로 고정하여 성장하였다. 이때 단결정 박막의 결정성은 광발광 스펙트럼과 이중결정 X-선 요동곡선 (DCRC)으로 부터 구하였다. $AgGaS_2$의 광흡수 스펙트럼으로부터 구한 온도에 의존하는 에너지 밴드갭 $E_g(T)$는 Varshni. 공식에 fitting한 결과 $E_g(T)=2.7284 eV-(8.695{\times}10^{-4}eV/K)T^2/T(T+332K)$를 잘 만족하였다. 성장된 $AgGaS_2$, 단결정 박막을 Ag, Ga, S분위기에서 각각 열처리하여 10K에서 photoluminescience(PL) spectrum을 측정하여 점 결함의 기원을 알아보았다. PL 측정으로부터 얻어진 $V_{Ag},\;V_s,\;Ag_{int}$, 그리고 $S_{int}$는 주개와 받개로 분류되어졌다. $AgGaS_2$ 단결정 박막을 Ag분위기에서 열처리하면 n형으로 변환됨을 알 수 있었다. 또한, Ca 분위기에서 열처리하면 열처리 이전의 PL스펙트럼을 보이고 있어서, $AgGaS_2$ 단결정 박막에서 Ga은 안정된 결합의 형태로 있기 때문에 자연 결함의 형성에는 관련이 없음을 알았다.