• 제목/요약/키워드: Band gap energy

검색결과 708건 처리시간 0.032초

Hot wall epitaxy(HWE)법에 의한 $AgGaSe_2$ 단결정 박막 성장과 열처리 효과 (Growth and effect of thermal annealing for $AgGaSe_2$ single crystal thin film by hot wall epitaxy)

  • 백승남;홍광준;김장복
    • 한국결정성장학회지
    • /
    • 제16권5호
    • /
    • pp.189-197
    • /
    • 2006
  • [$AgGaSe_2$] 단결정 박막을 수평 전기로에서 합성한 $AgGaSe_2$ 다결정을 증발원으로하여, hot wall epitaxy(HWE) 방법으로 증발원과 기판(반절연성-GaAs(100))의 온도를 각각 $630^{\circ}C,\;420^{\circ}C$로 고정하여 성장하였다. 이때 단결정 박막의 결정성은 광발광 스펙트럼과 이중결정 X-선 요동곡선(DCRC)으로 부터 구하였다. $AgGaSe_2$의 광흡수 스펙트럼으로부터 구한 온도에 의존하는 에너지 밴드갭 $E_g(T)$는 Varshni 공식에 fitting한 결과 $E_g(T)=1.9501eV-(8.79x10^{-4}eV/K)T^2(T+250K)$를 잘 만족하였다. 성장된 $AgGaSe_2$ 단결정 박막을 Ag, Ga, Se 분위기에서 각각 열처리하여 10K에서 photoluminescience(PL) spectrum을 측정하여 점 결함의 기원을 알아보았다. PL 측정으로 부터 얻어진 $V_{Ag},\;V_{Se},\;Ag_{int}$, 그리고 $Se_{int}$는 주개와 받개로 분류되어졌다. $AgGaSe_2$ 단결정 박막을 Ag 분위기에서 열처리하면 p형으로 변환됨을 알 수 있었다. 또한, Ga 분위기에서 열처리하면 열처리 이전의 PL 스펙트럼을 보이고 있어서, $AgGaSe_2$ 단결정 박막에서 Ga은 안정된 결합의 형태로 있기 때문에 자연 결함의 형성에는 관련이 없음을 알았다.

Hot Wall Epitaxy(HWE)법에 의한 Cdln2S4 단결정 박막 성장과 열처리 효과 (The Effect of Thermal Annealing and Growth of Cdln2S4 Single Crystal Thin Film by Hot Wall Epitaxy)

  • 홍광준;이관교
    • 한국전기전자재료학회논문지
    • /
    • 제15권11호
    • /
    • pp.923-932
    • /
    • 2002
  • A stoichiometric mixture of evaporating materials for CdIn$\_$2/S$\_$4/ single crystal thin films was prepared from horizontal furnace. To obtain the single crystal thin films, CdIn$\_$2/S$\_$4/ mixed crystal was deposited on thoroughly etched semi-insulating GaAs(100) substrate by hot wall epitaxy(HWE) system. The source and substrate temperatures were 630 $\^{C}$ and 420 $\^{C}$, respectively. The crystalline structure of single crystal thin films was investigated by the photoluminescence and double crystal X-ray diffraction(DCXD). The carrier density and mobility of CdIn$\_$2/S$\_$4/ single crystal thin films measured from Hall effect by van der Pauw method are 9.01$\times$10$\^$16/ cm$\^$-3/ and 219 ㎠/V$.$s at 293 K, respectively. From the optical absorption measurement, the temperature dependence of energy band gap on CdIn$\_$2/S$\_$4/ single crystal thin films was found to be Eg(T) = 2.7116 eV - (7.74 $\times$ 10$\^$-4/ eV) T$\^$2//(T+434). After the as-grown CdIn$\_$2/S$\_$4/ single crystal thin films was annealed in Cd-, S-, and In-atmospheres, the origin of point defects of CdIn$\_$2/S$\_$4/ single crystal thin films has been investigated by the photoluminescence(PL) at 10 K. The native defects of V$\_$cd/, V$\_$s/, Cd$\_$int/ and S$\_$int/ obtained by PL measurements were classified as donors or accepters type. And we concluded that the heat-treatment in the S-atmosphere converted CdIn$\_$2/S$\_$4/ single crystal thin films to an optical p-type. Also, we confirmed that In in CdIn$\_$2/S$\_$4/GaAs did not from the native defects because In in CdIn$\_$2/S$\_$4/ single crystal thin films existed in the form of stable bonds.

예열 온도 변화에 따른 Sol-Gel 법에 의해 제작된 ZnO 박막의 물리적 특성 연구 (Physical Properties of ZnO Thin Films Grown by Sol-Gel Process with Different Preheating Temperatures)

  • 김익주;한호철;이충선;송용진;태원필;서수정;김용성
    • 한국세라믹학회지
    • /
    • 제41권2호
    • /
    • pp.136-142
    • /
    • 2004
  • 출발물질로 zinc acetate dihydrate(Zn($CH_3$COO)$_2$$.$2$H_2O$)를 사용하였고, 이 물질을 isopropanol(($CH_3$)$_2$CHOH)-monoethanolamine(MEA:H$_2$NCH$_2$C$H_2O$H) 용액에 용해하여 균일하고 안정한 sol을 만들었다. Sol-gel spin-coating 법에 의해 ZnO 박막을 제조시 예열 온도에 따른 박막의 c-축 배향성과 그 물리적 특성을 조사하였다. c-축으로의 성장은 예열 온도의 변화에 따라 차이를 보였으며. 275$^{\circ}C$에서 예열 후 $650^{\circ}C$에서 최종 열처리한 ZnO 박막은 XRD 측정결과 기판에 수직한 (002) 방향으로 강한 배향성을 나타내었다 200∼30$0^{\circ}C$에서 예열 후, $650^{\circ}C$에서 최종 열처리한 ZnO 박막은 UV-vis측정결과 가시광선 영역에서 온도에 따른 투과도의 변화를 보이지만 평균 85% 이상의 높은 투과도를 보였다. 또한 370nm 부근에서 흡수단을 나타내었으며, 광학적 밴드갭은 약 3.22 eV로 나타났다. 발광방출(PL) 측정결과, 황색(620nm, 2.0 eV)발광이 관찰되어, 무기발광 소자로의 응용 가능성을 나타내었다.

Hot Wall Epitaxy(HWE)법에 의한 CdGa2Se4 단결정 박막 성장과 열처리 효과 (The Effect of Thermal Annealing and Growth of CdGa2Se4 Single Crystal Thin Film by Hot Wall Epitaxy)

  • 홍명석;홍광준
    • 한국전기전자재료학회논문지
    • /
    • 제20권10호
    • /
    • pp.829-838
    • /
    • 2007
  • The stochiometric mix of evaporating materials for the $CdGa_2Se_4$ single crystal thin films was prepared from horizontal furnace. To obtain the single crystal thin films, $CdGa_2Se_4$ mixed crystal was deposited on thoroughly etched semi-insulating GaAs(100) substrate by the Hot Wall Epitaxy (HWE) system. The source and substrate temperature were $630^{\circ}C$ and $420^{\circ}C$, respectively. The crystalline structure of single crystal thin films was investigated by the photoluminescence and double crystal X-ray diffraction (DCXD).The carrier density and mobility of $CdGa_2Se_4$ single crystal thin films measured from Hall effect by van der Pauw method are $8.27{\times}10^{17}\;cm^{-3},\;345\;cm^2/V{\cdot}s$ at 293 K. respectively. The temperature dependence of the energy band gap of the $CdGa_2Se_4$ obtained from the absorption spectra was well described by the Varshni's relation, $Eg(T)\;=\;2.6400\;eV\;-\;(7.721{\times}10^{-4}\;eV/K)T^2/(T+399\;K)$. After the as-grown single crystal $CdGa_2Se_4$ thin films were annealed in Cd-, Se-, and Ga -atmospheres, the origin of point defects of single crystal $CdGa_2Se_4$ thin films has been investigated by PL at 10 K. The native defects of $V_{Cd}$, $V_{Se}$, $Cd_{int}$, and $Se_{int}$ obtained by PL measurements were classified as donors or accepters. We concluded that the heat-treatment in the Cd-atmosphere converted single crystal $CdGa_2Se_4$ thin films to an optical p-type. Also, we confirmed that Ga in $CdGa_2Se_4/GaAs$ did not form the native defects because Ga in single crystal $CdGa_2Se_4$ thin films existed in the form of stable bonds.

산화아연 나노핵의 조작을 통한 산화아연 나노로드의 제어 (Artificial Control of ZnO Nanorods via Manipulation of ZnO Nanoparticle Seeds)

  • 신경식;이삼동;김상우
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
    • /
    • pp.399-399
    • /
    • 2008
  • Synthesis and characterization of ZnO structure such as nanowires, nanorods, nanotube, nanowall, etc. have been studied to multifunctional application such as optical, nanoscale electronic and chemical devices because it has a room-temperature wide band gap of 3.37eV, large exiton binding energy(60meV) and various properties. Various synthesis methods including chemical vapor deposition (CVD), physical vapor deposition, electrochemical deposition, micro-emulsion, and hydrothermal approach have been reported to fabricate various kinds of ZnO nanostructures. But some of these synthesis methods are expensive and difficult of mass production. Wet chemical method has several advantage such as simple process, mass production, low temperature process, and low cost. In the present work, ZnO nanorods are deposited on ITO/glass substrate by simple wet chemical method. The process is perfomed by two steps. One-step is deposition of ZnO seeds and two-step is growth of ZnO nanorods on substrates. In order to form ZnO seeds on substrates, mixture solution of Zn acetate and Methanol was prepared.(one-step) Seed layers were deposited for control of morpholgy of ZnO seed layers by spin coating process because ZnO seeds is deposited uniformly by centrifugal force of spin coating. The seed-deposited samples were pre-annealed for 30min at $180^{\circ}C$ to enhance adhesion and crystallinnity of ZnO seed layer on substrate. Vertically well-aligned ZnO nanorods were grown by the "dipping-and-holding" process of the substrates into the mixture solution consisting of the mixture solution of DI water, Zinc nitrate and hexamethylenetetramine for 4 hours at $90^{\circ}C$.(two-step) It was found that density and morphology of ZnO nanorods were controlled by manipulation of ZnO seeds through rpm of spin coating. The morphology, crystallinity, optical properties of the grown ZnO nanostructures were carried out by field-emission scanning electron microscopy, high-resolution electron microscopy, photoluminescence, respectively. We are convinced that this method is complementing problems of main techniques of existing reports.

  • PDF

산화티타늄 피막의 광 전기분해 특성에 관한 연구 (A Study of Photoelectrolysis of Water by Use of Titanium Oxide Films)

  • 박성용;조병원;주재백;윤경석;이응조
    • 공업화학
    • /
    • 제3권1호
    • /
    • pp.88-99
    • /
    • 1992
  • 광 전기분해시 양극으로 사용되는 산화티타늄 반도체 전극의 안정성을 증대시키고 효율향상을 위해서 순수한 티타늄 전극을 양극 산화법, 전기로 산화법, 불꽃 산화법으로 산화 피막을 제조하였으며 In을 Ti와 $TiO_2$소지에 전기도금을 한 후 전기로 산화법으로 혼합 산화물을 제조하였다. 또한 $Al_2O_3$ 와 NiO는 진공증착 방법을 이용하여 Ti 소지위에 증착시킨 후 전기로 산화법을 이용하여 혼합 산화물을 제조하였다. 에너지변환 효율(${\eta}$)은 인가전위에 따라서 다른 값을 갖는데 0.6V로 계산하여 보면 $1200^{\circ}C$의 불꽃으로 2분간 산화시킨 전극이 0.98%로 가장 큰 값을 가졌으며 양극 산화법으로 제조한 전극의 ${\eta}$는 0.14%로 작은 값을 보여 주었다. 한편 $800^{\circ}C$ 전기로에서 10분간 산화시킨 전극의 ${\eta}$는 0.57%로 띠간 에너지는 2.9eV로 나타났다. 한편 In을 Ti 및 $TiO_2$ 소지위에 전기도금시킨 전극의 ${\eta}$는 0.8%였으며 인가전위가 증가함에 따라서 ${\eta}$는 증가하였다. 그러나 $Al_2O_3$와 NiO를 Ti소지위에 진공증착시킨 전극의 ${\eta}$는 다른 전극들에 비해서 가장 낮은 값을 나타내었다.

  • PDF

광발광 측정법에 의한 $AgGaS_2$ 단결정 박막의 점결함 연구 (Study on Point Defect for $AgGaS_2$ Single Crystal Thin film Obtained by Photoluminescience Measurement Method)

  • 홍광준;김경석
    • 비파괴검사학회지
    • /
    • 제25권2호
    • /
    • pp.117-126
    • /
    • 2005
  • [ $AgGaS_2$ ] 단결정 박막을 수평 전기로에서 합성한 $AgGaS_2$ 다결정을 증발원으로하여, hot wall epitaxy(HWE) 방법으로 증발원과 기판 (반절연성 -GaAs (100))의 온도를 각각 $590^{\circ}C,\;440^{\circ}C$로 고정하여 성장하였다. 이때 단결정 박막의 결정성은 광발광 스펙트럼과 이중결정 X-선 요동곡선 (DCRC)으로 부터 구하였다. $AgGaS_2$의 광흡수 스펙트럼으로부터 구한 온도에 의존하는 에너지 밴드갭 $E_g(T)$는 Varshni. 공식에 fitting한 결과 $E_g(T)=2.7284 eV-(8.695{\times}10^{-4}eV/K)T^2/T(T+332K)$를 잘 만족하였다. 성장된 $AgGaS_2$, 단결정 박막을 Ag, Ga, S분위기에서 각각 열처리하여 10K에서 photoluminescience(PL) spectrum을 측정하여 점 결함의 기원을 알아보았다. PL 측정으로부터 얻어진 $V_{Ag},\;V_s,\;Ag_{int}$, 그리고 $S_{int}$는 주개와 받개로 분류되어졌다. $AgGaS_2$ 단결정 박막을 Ag분위기에서 열처리하면 n형으로 변환됨을 알 수 있었다. 또한, Ca 분위기에서 열처리하면 열처리 이전의 PL스펙트럼을 보이고 있어서, $AgGaS_2$ 단결정 박막에서 Ga은 안정된 결합의 형태로 있기 때문에 자연 결함의 형성에는 관련이 없음을 알았다.

Sol-gel 법으로 제작한 Al-doped ZnO 박막의 도핑 농도 및 열처리 온도에 따른 광학적 및 전기적 특성 (Optical and Electrical Properties of Al-doped ZnO Thin Films Fabricated by Sol-gel Method with Various Al Doping Concentrations and Annealing Temperatures)

  • 신현호;강성준;윤영섭
    • 대한전자공학회논문지SD
    • /
    • 제44권5호
    • /
    • pp.1-7
    • /
    • 2007
  • Sol-gel 법으로 quartz 기판 위에 Al 도핑 농도와 열처리 온도에 따른 AZO 박막을 제작하였다. 1 % Al 이 도핑되고 550 $^{\circ}C$ 에서 열처리한 ZnO 박막에서 가장 우수한 (002) 배향성과 가장 평탄한 박막 (1.084 nm) 이 제작되었다. 모든 박막은 가시광 영역에서 약 80 % 이상의 투과율을 보였으며, Al 농도가 증가할수록 에너지 밴드 갭이 넓어지는 Burstein-Moss 효과가 관찰되었다. Hall 측정 결과, 순수한 ZnO 박막보다 Al 이 도핑된 ZnO 박막에서 캐리어 농도의 증가와 비저항 값의 감소가 나타났다. 또, Al 의 도핑 농도가 증가함에 따라 segregation 효과로 인한 캐리어 농도의 감소와 비저항 값의 증가가 관찰되었다. 1% Al 이 도핑되고 550 $^{\circ}C$ 에서 열처리한 ZnO 박막에서 가장 큰 캐리어 농도 ($1.80{\times}10^{19}\;cm^{-3}$) 와 가장 낮은 비저항 (0.84 ${\Omega}cm$) 값을 나타내었다.

Structural and Electrical Properties of Fluorine-doped Zinc Tin Oxide Thin Films Prepared by Radio-Frequency Magnetron Sputtering

  • Pandey, Rina;Cho, Se Hee;Hwang, Do Kyung;Choi, Won Kook
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
    • /
    • pp.335-335
    • /
    • 2014
  • Over the past several years, transparent conducting oxides have been extensively studied in order to replace indium tin oxide (ITO). Here we report on fluorine doped zinc tin oxide (FZTO) films deposited on glass substrates by radio-frequency (RF) magnetron sputtering using a 30 wt% ZnO with 70 wt% SnO2 ceramic targets. The F-doping was carried out by introducing a mixed gas of pure Ar, CF4, and O2 forming gas into the sputtering chamber while sputtering ZTO target. Annealing temperature affects the structural, electrical and optical properties of FZTO thin films. All the as-deposited FZTO films grown at room temperature are found to be amorphous because of the immiscibility of SnO2 and ZnO. Even after the as-deposited FZTO films were annealed from $300{\sim}500^{\circ}C$, there were no significant changes. However, when the sample is annealed temperature up to $600^{\circ}C$, two distinct diffraction peaks appear in XRD spectra at $2{\Theta}=34.0^{\circ}$ and $52.02^{\circ}$, respectively, which correspond to the (101) and (211) planes of rutile phase SnO2. FZTO thin film annealed at $600^{\circ}C$ resulted in decrease of resistivity $5.47{\times}10^{-3}{\Omega}cm$, carrier concentration ~1019 cm-3, mobility~20 cm2 V-1s-1 and increase of optical band gap from 3.41 to 3.60 eV with increasing the annealing temperatures and well explained by Burstein-Moss effect. Change of work function with the annealing temperature was obtained by ultraviolet photoemission spectroscopy. The increase of annealing temperature leads to increase of work function from ${\phi}=3.80eV$ (as-deposited FZTO) to ${\phi}=4.10eV$ ($600^{\circ}C$ annealed FZTO) which are quite smaller than 4.62 eV for Al-ZnO and 4.74 eV for SnO2. Through X-ray photoelectron spectroscopy, incorporation of F atoms was found at around the binding energy of 684.28 eV in the as-deposited and annealed FZTO up to 400oC, but can't be observed in the annealed FZTO at 500oC. This result indicates that F atoms in FZTO films are loosely bound or probably located in the interstitial sites instead of substitutional sites and thus easily diffused into the vacuum from the films by thermal annealing. The optical transmittance of FZTO films was higher than 80% in all specimens and 2-3% higher than ZTO films. FZTO is a possible potential transparent conducting oxide (TCO) alternative for application in optoelectronics.

  • PDF

Hot Wall Epitaxy(HWE)법으로 성장된 CuGaSe$_2$ 단결정 박막 성장의 열처리 효과 (The Effect of Thermal Annealing for CuGaSe$_2$ Single Crystal Thin Film Grown by Hot Wall Epitaxy)

  • 박창선;홍광준
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
    • /
    • pp.352-356
    • /
    • 2003
  • A stoichiometric mixture of evaporating materials for $CuGaSe_2$ single crystal am films was prepared from horizontal electric furnace. Using extrapolation method of X-ray diffraction patterns for the polycrystal $CuGaSe_2$, it was found tetragonal structure whose lattice constant $a_0$ and $c_0$ were $5.615\;{\AA}\;and\;11.025\;{\AA}$, respectively. To obtain the single crystal thin films, $CuGaSe_2$ mixed crystal was deposited on thoroughly etched semi-insulating GaAs(100) substrate by the hot wall epitaxy (HWE) system. The source and substrate temperatures were $610^{\circ}C$ and $450^{\circ}C$, respectively, The crystalline structure of the single crystal thin films was investigated by the photoluminescence and double crystal X-ray diffraction (DCXD). The carrier density and mobility of $CuGaSe_2$ single crystal thin films measured with Hall effect by van der Pauw method are $9.24{\times}10^{16}\;cm^{-3}$ and $295\;cm^2/V{\cdot}s$ at 293 K, respectively. The temperature dependence of the energy band gap of the $CuGaSe_2$ obtained from the absorption spectra was well described by the Varshni's relation, $E_g(T)\;:\;1.7998\;eV\;-\;(8.7489\;{\times}\;10^{-4}\;eV/K)T^2(T\;+\;335\;K)$. After the as-grown $CuGaSe_2$ single crystal thin films was annealed in Cu-, Se-, and Ga-atmospheres, the origin of point defects of $CuGaSe_2$ single crystal thin films has been investigated by the photoluminescence(PL) at 10 K. The native defects of $V_{CU}$, $V_{Se}$, $CU_{int}$, and $Se_{int}$, obtained by PL measurements were classified as a donors or accepters type. And we concluded that the heat-treatment in the Cu-atmosphere converted $CuGaSe_2$ single crystal thin films to an optical n-type. Also, we confirmed that Ga in $CuGaSe_2/GaAs$ did not form the native defects because Ga in $CuGaSe_2$ single crystal thin films existed in the form of stable bonds.

  • PDF