• Korean Journal of Remote Sensing
• /
• v.25 no.3
• /
• pp.263-270
• /
• 2009

Noise band removal is a crucial step before spectral matching since the noise bands can distort the typical shape of spectral reflectance, leading to degradation on the matching results. This paper proposes a statistical noise band removal method for hyperspectral data using the correlation coefficient between two bands. The correlation coefficient measures the strength and direction of a linear relationship between two random variables. Considering each band of the hyperspectral data as a random variable, the correlation between two signal bands is high; existence of a noisy band will produce a low correlation due to ill-correlativeness and undirected ness. The unsupervised k-nearest neighbor clustering method is implemented in accordance with three well-accepted spectral matching measures, namely ED, SAM and SID in order to evaluate the validation of the proposed method. This paper also proposes a hierarchical scheme of combining those measures. Finally, a separability assessment based on the between-class and the within-class scatter matrices is followed to evaluate the applicability of the proposed noise band removal method. Also, the paper brings out a comparison for spectral matching measures. The experimental results conducted on a 228-band hyperspectral data show that while the SAM measure is rather resistant, the performance of SID measure is more sensitive to noise.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.64-67
• /
• 2003

This paper presents the design of dual-band VCO using PBG structure for IEEE 802.11A/B. By adding switch circuit to the single-band VCO, we could achieve a dual-band VCO. The center frequencies of dual-band VCO are 5.93GHz(-13dBm) and 2.37GHz (3.50dBm). The phase noise is improved about l0dB by using PBG Structure.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.31 no.6
• /
• pp.485-492
• /
• 2019

The observation system has been developed to investigate the rip currents at Haeundae beach using X-band marine radar. X-band radar system can observe shape, size, and velocity of rip currents, which is difficult to obtain through field observation by conventional device. Algorithms which automatically detect locations, shapes, and magnitudes of rip currents were developed using time averaged X-band radar sea clutter images. X-band sea clutter images are transformed through 3D FFT into 2D wave number spectrum and frequency spectrum. Rip current velocities were estimated using differences in wave-number spectra and wave frequency spectra due to Doppler shift. The algorithm was verified by drift experiments. At Haeundae beach, the radar system exactly located the rip currents and found to be sustained for 1-2 days at fixed locations.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.2 s.117
• /
• pp.227-232
• /
• 2007

In this paper, we propose Triple-band antenna, which is practicable for the transmission and the reception of the frequency band used in mobile broadcast and mobile internet. We choose T-DMB(Band-III), DAB(L-Band) for a mobile broadcast and Wibro for a mobile internet. The size of proposal antenna measures $10{\times}74{\times}0.6[mm^3]$. Although being defective in that T-DMB bandwidth is rather narrow, the antenna, considering the reception environment, has an advantage of a realistic possibility of reception in 8 channel($180{\sim}186$ MHz)and 12 channel($206{\sim}210$ MHz) of T-DMB band, being given broadcast services. Also It has gains similar characteristics of ideal dipole antenna in DAB and Wibro band.

• Journal of the Korean Burn Society
• /
• v.23 no.1
• /
• pp.25-29
• /
• 2020

This paper presents our clinical experiences for reconstruction of the linear depressed postburn scar band by rhombus subcutaneous pedicle skin flap (RSPF). We report new RSPF, it's versatility, and effectiveness for correction of the mild to moderate linear depressed postburn scar band. To correct the postburn scar band, we have newly designed the Rhombus Subcutaneous Pedicle Skin Flap (RSPF), which is made as rhombus-shaped skin flap on the inside of scar band. After excision of burn scar band, the each vertex of RSPF flap is advanced into the skin defects at apex of extended skin incision, which is starting from the upper and lower portion of the removed burn scar band at a near right angle. This flap can add more extra skin to adjacent superior and inferior area of excised scar band. We have experienced 2 cases of RSPF for reconstruction of linear depressed postburn scar band deformities in lower extremity. After 3 weeks to 3 months postoperative follow ups, relatively satisfactory results were obtained in all cases. We had successfully reconstructed the linear depressed postburn scar postburn band of lower extremity using the rhombus subcutaneous pedicle skin flap. For the correction of mild to moderate sized linear depressed postburn scar band deformities in extremity, the RSPF is simple, and very effective without donor morbidity.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.1
• /
• pp.168-175
• /
• 2013

This paper presents compact dual-band WLAN filter and filter module. They were developed by embedding all of the passive lumped elements into a LTCC substrate. In order to reduce the size/volume of the filter and avoid EM parasitic couplings between the passive elements, the proposed filter was designed using a 3rd order Chebyshev circuit topology and J-inverter transformation technology. The 3rd order Chebyshev bandpass filter was firstly designed for the band-selection of the 802.11b and was then transformed using finite transmission zeros technologies. Finally, the dual-band filter was realized by adding two notch resonators to the 802.11b filter circuit for the band-selection of the 802.11a/g. The maximum insertion losses in the lower and higher passbands were better than 2.0 and 1.3 dB with minimum return losses of 15 and 14 dB, respectively. Furthermore, the filter was integrated with a diplexer to clearly split the signals between 2 and 5 GHz. The maximum insertion and minimum return losses of the fabricated module were 2.2 and 14 dB at 2.4 - 2.5 GHz, and 1.6 and 19 dB at 5.15 - 5.85 GHz, respectively. The overall volume of the fabricated filter was $2.7{\times}2.3{\times}0.59mm^3$.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.12C
• /
• pp.759-763
• /
• 2011

In this paper, a dual-band T-shaped microstrip monopole antenna with a pair of slits for 2.4/5.2/5.8-GHz wireless local area networks (WLANs) is proposed. A pair of T-shaped slits is loaded on a T-shaped monopole antenna fed by microstrip line in order to obtain dual-band operation as well as to reduce the antenna size. It is demonstrated from experimental results that the proposed antenna can cover all the required bands for WLAN. The measured impedance bandwidth for VSWR<2 is about 5.7% (2.37-2.51GHz) in the lower frequency band and about 28.8% (4.76-6.35GHz) in the higher frequency band. The measured peak gains are about 1.33 dBi to 1.66 dBi in the 2.4GHz band, 3.50 dBi to 3.95 dBi in the 5.25GHz band, and 2.06 dBi to 2.34 dBi in the 5.8GHz band.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.11
• /
• pp.2518-2525
• /
• 2015

In this paper, we propose a UWB(Ultra Wide Band) antenna with CPW(Coplanar Waveguide) structure notched the 802.11a(5.15 ~ 5.825 GHz) band by using the U shaped slot. The proposed antenna not only shows Ultra-Wideband characteristic(3.1 ~ 10.6 GHz) suitable for UWB communications but has partially notched-band characteristic to reject 5 GHz WLAN band(5.15 ~ 5.825 GHz). The antenna is designed on an FR-4 substrate of which the dielectric constant is 4.4, and its overall size is $30mm(W){\times}20mm(L){\times}1mm(t)$. Fabricated antenna satisfied $VSWR{\leq}2$ in 3.1 ~ 10.6 GHz except for the band rejection of 5.15 ~ 5.825 GHz. And measured results of gain and radiation patterns characteristics displayed determined for operating bands.

• Korean Journal of Plant Tissue Culture
• /
• v.25 no.5
• /
• pp.309-313
• /
• 1998

RAPD (Random Amplified Polymorphic DNA) analysis was conducted to Schisandra nigra plants in order to select the specific markers for monoecious and dioecious individuals. RAPD results using eighty random 10-mer primers revealed that S. nigra had a different banding pattern from S. chinensis and Kadsura japonica. When DNA isolated from leaves of monoecious and dioecious plants were used as PCR template, only five primers, OPA-17, OPA-19, OPB-03, OPB-09 and OFB-16, showed polymorphic band patterns. No variation in banding profiles within male or female individuals was observed when these five primers were used whereas three monoecious plants (No 1, No 2 and No 3) showed different banding patterns one another, A 750 bp segment was amplified by primer OPB-3 from male individuals. On the other hand, two segments, 950 bp and 1690 bp, with OPA-19 and 700 bp of segment with OPB-3 were amplified in female individuals. These result indicate that the specific buds of male and female S. nigra could be used as genetic markers for the early discrimination of male and female individuals.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.3 s.118
• /
• pp.288-297
• /
• 2007

The novel internal monopole chip antenna of penta-band operation for GSM850/GSM900/DCS/USPCS/WCDMA bands for mobile phones is proposed. This antenna occupies a small volume $8\times3.2\times20mm^3$ and is suitable to be embedded in a mobile phone as an internal antenna. The minimization of the proposed antenna was realized by using spiral line structure and meander line structure on FR-4 of dielectric$(\varepsilon_r=4.4)$. The designed antenna has the wide-band operation in the upper band by overlapping high order resonances. The measured bandwidth of this antenna (VSWR>3) is 150MHz$(1,030\sim1,180\;MHz)$ in the lower band operation and 650 MHz$(1,760\sim2,410\;MHz)$ in higher band operation. The measured radiation efficiency within bandwidth(VSWR 3:1) is over 50 %. The antenna has been designed by a commercial software HFSS.