• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.33 no.3
• /
• pp.69-74
• /
• 2001

Diaper rash is found on the skin inside of babys diaper area. Most diaper rashes are caused by prolonged contact with the moisture, germs, and ammonia of the stool and urine. Some diaper rashes are caused by fungi infection such as candida albicans and Preteus vulgaris. In this study, Candida albicans was used as a test microorganism and experiment was carried out to inhibit diaper rash. Handsheets were treated with chitosan oligosaccharide, bamboo extractives, as well as mixture of monolaurin as an emulsifier and bamboo extractives. Both shake flask method and halo test were applied in order to examine the antimicrobial activity of each sample. It was found from both results of the halo test and shake flask method that handsheets treated with chitisan oligosaccharide or bamboo extractives showed antimicrobial property. In the treatment of bamboo extractives without emulsifier, no distinct difference in antimicrobial effect was found between bamboo branch and bamboo leaves extractives. In case of mixture of bamboo extractives and emulsifier, the result also suggested that bamboo branch showed better syngergistic effect than bamboo leaves. Both chitosan oligosaccharide and bamboo extractive can be used as antifungal agents against Candida albicans for making diaper.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.3
• /
• pp.43-51
• /
• 2011

Chemical composition and contents of carbohydrates, lignin, and extractives in Moso(Phyllostachys pubescens Mazel), Henon(Phyllostachys nigra var. henonis Stapf ex. Rendle), and Timber bamboo(Phyllostachys bambusoides Sieb. et Zucc.) known as economically valuable bamboo species in Korea were analyzed as a function of ages. All of tested bamboo species were composed of fucose, arabinose, rhamnose, galactose, glucose, xylose, and mannose. Glucose was the sugar which showed the highest content followed by xylose. The contents of others were below 3%. Sugar contents of bamboo shoots showed the lowest among the tested bamboo samples, and the constant rates were shown after 50 days of growth. Lignin content increased by the growth of one year, and the increasing rates tended to be constant after the growth of three years. Bamboo shoots have the highest contents of acid-soluble lignin, which turned into insoluble lignin after the growth of 50 days. Bamboo shoots showed the highest content of extractives and tend to be decreased by the growth of 50 days and then the content increased slowly in proportion to the period of bamboo growth. No relationship was found between species and chemical composition of bamboo. However, there were significant difference in chemical composition between bamboo shoots and 50-day old bamboo.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.4
• /
• pp.69-76
• /
• 2012

The bamboo fibers from three Korean bamboo species, Moso, Henon and Timber bamboo, were prepared by disintegration after thermal treatment. The samples were prepared according to the age of growth; bamboo shoots, 20 days and 50 days of growth. The fiber quality was also investigated by morphological and chemical analyses. There was no big difference in the dry mass of fibers among the three bamboo species. However, the dry mass of fibers from 50 days of growth was increased by 34%, whereas it was ranged in 9-20% in the case of fibers from bamboo shoots and 20 days of growth. In the results of morphological analysis, the fibers could be classified as the fibers from metaxylem, the fibers from parenchyma and the fines produced during disintegration. The fibers from 50 days of growth were separated from metaxylem, whereas the fibers from bamboo shoots and 20 days of growth were mainly consisted of fibers from metaxylem and parenchyma. The chemical analysis of fibers showed that the contents of carbohydrates, lignin and extractives were not much affected by thermal treatment.

• Journal of the Korean Wood Science and Technology
• /
• v.25 no.3
• /
• pp.8-15
• /
• 1997

The ultrasonic velocity and dynamic MOE of acetylated bamboos were investigated using PUNDIT, a transit time measuring device for longitudinal ultrasonic propagation. Bamboo specimens were boiled in acetic anhydride for 2, 4 and 6 hours, and the maximum average WPG (Weight Percentage Gain) of 19% was obtained at 6 hours. The volumes of acetylated bamboos increase with boiling time and WPG, while as WPG increases their oven-dry densities generally increase with a concave around 5% WPG. This oven-dry density pattern likely influences the trends of ultrasonic velocity and dynamic MOE. which generally decrease with a convex around 5% WPG. It is postulated that during boiling extractives in a bamboo move and aggregate at its surfaces transiently, resulting in the increase of ultrasonic velocity and dynamic MOE. To explain the fact that ultrasonic velocity varies with WPG a simple model was proposed and some ultrasonic properties of a transmitted wave were examined.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.41 no.4
• /
• pp.1-7
• /
• 2009

One commercial Xuanji and five traditional paper which were made in south china were collected and its chemical, physical, optical properties were investigated and compared to those of Hanji. Extractives(cold, hot, 1% NaOH and Alcohol-benzene) of bamboo paper had higher contents compared with other papers. Strength properties had been highest Hanji, but had been lowest Xuanji 1 and 2. Brightness of all paper were decreased as following order; Xuanji, Hanji, Thai paper, bast paper 1, bast paper 2, Dongpa paper, bamboo paper.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.6
• /
• pp.872-882
• /
• 2017

The objective of this study was to evaluate the properties of bamboo oriented strand board (B-OSB) from andong (Gigantochloa psedoarundinacea) and betung (Dendrocalamus asper) with and without steam treatment. Strands were steam-treated at $126^{\circ}C$ for 1 h under 0.14 MPa pressure. The extractive content of bamboo strands before and after steam treatment were determined according to a standard (TAPPI T 204 om-88). Three-layer B-OSB with the core layer perpendicular to the surface and back layers were formed and binded with 8% of phenol formaldehyde (PF) resin with the addition of 1% of wax. The evaluation of physical and mechanical properties of the boards were conducted in accordance with the JIS A 5908:2003 standard. The results showed that steam treatment of bamboo strands significantly reduced the extractive content. Steam treatment tended to increase the dimensional stability and mechanical properties of B-OSB from andong and betung. The results showed that the dimensional stability and bending strength of B-OSB from betung was higher than those of andong. The internal bond strength of B-OSB from andong was higher than betung owing to a greater amount of extractives dissolved during the steam treatment.

• Journal of the Korean Wood Science and Technology
• /
• v.49 no.1
• /
• pp.14-22
• /
• 2021

The objective of this study was to investigate the effect of alkali-washing with different sodium hydroxide concentrations on the chemical compositions of steam-treated Betung bamboo strand. Strands were subjected to steam treatment at 126 ℃ for 1 h under 0.14 MPa pressure and followed by washing with 1-5% sodium hydroxide solution for 30 sec. The alteration of structural and non-structural chemical components content of bamboo strands was evaluated. Steam and washing treatments with various concentrations of sodium hydroxide solution considerably reduced the extractive content of bamboo strands, and the cell wall chemical components of the strand in the small degree. FTIR analysis showed noticeable changes in peaks related to hemicellulose and lignin. The relative crystallinity increased significantly after steam and washing treatment with sodium hydroxide up to 3% concentration. SEM Images showed smooth and clean strands surface after washing with 3% sodium hydroxide.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.1
• /
• pp.135-146
• /
• 2016

Three fiber sources including Russian spruce (Picea jezoensis) and larix (Larix leptolepis), and Myanmar bamboo (Phyllostachys bambusoides) for thermomechanical pulp were explored to replace domestic pine (Pinus densiflora) pulp that has some limitations in an aspect of supply and pitch trouble. Thermomechanical pulps were manufactured under the identical condition, and then compared with their representative pulp properties and pulping process. Both Russian larix and Myanmar bamboo contained large amounts of extractives that would negatively affect mechanical pulping processes. Russian spruce showed the least contents in shives and pitch. Russian spruce and domestic pine reached an optimum freeness level within a short pulp processing time, which consumed less amount of refining energy compared to larix and bamboo. In particular, the spruce wood showed the highest brightness level which might lead to a less consumption of bleaching chemicals. It was expected that Russian spruce could be replaced with the domestic pine wood in respect of both pulping process and pulp quality.