• 한국축산시설환경학회지
• /
• 제20권3호
• /
• pp.105-116
• /
• 2014

In this study, we developed a fermented TMR producing system which could a continuous operation of baling and wrapping the mixed TMR. The baling part has fixed chamber of dia. 900 mm and width 900 mm. And the the turn-table type wrapping part is very compact compared to conventional one in market. The test result were: The absorbed power of the prototype in working was 9.0~15.7 kW. The combined baling and wrapping performance was over 20 bales/hr. The leakage in the process was around 1.9 kg for making a 350 kg TMR bale. The diameter of wrapped TMR bale was 900~950 mm, and its weight was 350 kg in average. Therefore the density was $718kg/m^3$, and it was very high density to the inputted TMR. The pH of the fermented TMR was 5.0~5.6 which was similar to the fermented haylage, also the TMR had no butyric acid's odor.

• Journal of Biosystems Engineering
• /
• 제36권6호
• /
• pp.397-406
• /
• 2011

In this study, surveys on operation status of the 73 tractors with rated power of over 75 kW from six provinces in Korea were performed to obtain basic data required for development and efficient use of the high-power and high-performance tractors. And types of tractors and implements, operation crops, types of operations, annual operation areas, annual operation days, annual operation hours, operation speeds and widths, and problems and improvements in use were investigated. Most (91.7%) of the tractor surveyed were operated for forage and silage crops such as rice straw, whole barley, rye grass, reed canary grass, sudan grass, and the remains were operated for upland crops such as ginseng, sweet potato, potato, chinese cabbage, radish. Main operations of the tractors were cutting, baling, and wrapping for forage crops, plow tillage, rotary tillage, and manure spreading. About half (47.9%) of the tractors were used exclusively for forage crop harvesting such as forage crop cutting, forage baling, and bale wrapping, 24.5% of the tractors were used exclusively for plow or rotary tillage, and 27.4% of the tractors were used for both forage crop harvesting, and plow or rotary tillage. For the tractors with power ranges of 75~83, 89~94, 98~101, 113, 124 kW, average annual operation areas per tractor for plow tillage, rotary tillage, forage crop harvesting (cutting, baling, wrapping), and manure spreading operations were analyzed as 112.6. 144.8, 158.9. 390.0. 215.6 ha, respectively. and total average annual operation area per tractor was 171.3 ha. Average annual operation days per tractor for those operations were analyzed as 24.1, 28.9, 38.3, 55.4, 33.4, respectively, and total average annual operation days per tractor was 33.6. Average annual operation hours per tractor for them were analyzed as 260.0, 321.6, 408.1, 664.8, 413.8, respectively, and total average annual operation hours per tractor for the all tractors was 377.1. Ranges of operation widths of plow tillage, rotary tillage, forage crop cutting, forage baling, bale wrapping, and manure spreading operations were shown as 1.5~2.6, 2.3~3.0, 1.8~3.2, 1.8~2.0, 1.8~2.3, 3.1~6.6 m, respectively. Ranges of operation speed of plow tillage, rotary tillage, forage crop cutting, forage baling, bale wrapping, and manure spreading were shown as 6~9, 4~11, 9~16, 8~15, 8~17, 12~16 km/h, respectively.

• 한국초지조사료학회지
• /
• 제15권1호
• /
• pp.73-79
• /
• 1995

A simple conservation technique baled silage making of selected froage materials was discussed in Suwon and in Muan county during 1991 - 1992. Eleven species of forage crops and pasture grasses(maize. sorghum, pearl millet, barnyardgrass, rye, barley, spring oat, Italian ryegrass, orchardgrass, alfalfa and grass-legume pasture mixtures) were harvested at different growth stage from young plant to maturity and baled in a self constructed square baling chamber, and wrapped in a 0.05mm thick polyethylene plastic film. Each bales measured by 90cm long, 60cm wide and 50cm height and weighted between 15~20kg in dry matter basis. physio-molphologcal characteristics of the plants, leaf weight ratio(LWR), leaf area ratio(LAR), stalk ratio (SR), stalk hardness(SH) and other growth parameters, were analysed and were used as a parameter to evaluate the suitability of materials for baling. Italian ryegrass including orchardgrass, alfalfa and pasture mixtures produced high quality baled silage. Silage quality point(F1ieg-point) of Italian ryegrass was improved from 63 point in crushed custom silage to 75 piont in baled silage. Meterial of grass-legume pasture mixtures showed 55 point in crushed silage and 67 point in baled silage. Fodder rye, barley, spring oat and barnyardgrass were also evaluated as a good materials for baled silage making. On the other hand, meize including sorghum and peral millet were evaluated as a not suitable materals for baling due to its high value of SR and SH. Quality of maize was excellent with 88 point in clushed silage and medium with 47 point in baled silage making.

• Asian-Australasian Journal of Animal Sciences
• /
• 제28권6호
• /
• pp.807-815
• /
• 2015

The present study aimed at evaluating the intensity of Tifton 85 conditioning using a mower conditioner with free-swinging flail fingers and storage times on dehydration curve, fungi presence, nutritional value and in vitro digestibility of Tifton 85 bermudagrass hay dry matter (DM). The dehydration curve was determined in the whole plant for ten times until the baling. The zero time corresponded to the plant before cutting, which occurred at 11:00 and the other collections were carried out at 8:00, 10:00, 14:00, and 16:00. The experimental design was randomised blocks with two intensities of conditioning (high and low) and ten sampling times, with five replications. The high and low intensities related to adjusting the deflector plate of the free iron fingers (8 and 18 cm). In order to determine gas exchanges during Tifton 85 bermudagrass dehydration, there were evaluations of mature leaves, which were placed in the upper middle third of each branch before the cutting, at every hour for 4 hours. A portable gas analyser was used by an infrared IRGA (6400xt). The analysed variables were photosynthesis (A), stomatal conductance (gs), internal $CO_2$ concentration (Ci), transpiration (T), water use efficiency (WUE), and intrinsic water use efficiency (WUEi). In the second part of this study, the nutritional value of Tifton 85 hay was evaluated, so randomised blocks were designed in a split plot through time, with two treatments placed in the following plots: high and low intensity of cutting and five different time points as subplots: cutting (additional treatment), baling and after 30, 60, and 90 days of storage. Subsequently, fungi that were in green plants as well as hay were determined and samples were collected from the grass at the cutting period, during baling, and after 30, 60, and 90 days of storage. It was observed that Tifton 85 bermudagrass dehydration occurred within 49 hours, so this was considered the best time for drying hay. Gas exchanges were more intense before cutting, although after cutting they decreased until ceasing within 4 hours. The lowest values of acid detergent insoluble nitrogen were obtained with low conditioning intensity after 30 days of storage, 64.8 g/kg DM. The in vitro dry matter of Tifton 85 bermudagrass did not differ among the storage times or the conditioning intensities. There was no fungi present in the samples collected during the storage period up to 90 days after dehydration, with less than 30 colony forming units found on plate counting. The use of mower conditioners in different intensities of injury did not speed up the dehydration time of Tifton 85.

• 농업과학연구
• /
• 제42권1호
• /
• pp.53-61
• /
• 2015

Development of highly efficient and energy-saving tractors has been one of the issues in agricultural machinery. For design of such tractors, measurement and analysis of load on major power transmission parts of the tractors are the most important pre-requisite tasks. Objective of this study was to perform pre-processing procedures before effective analysis of load data of agricultural tractors (30, 75, and 82 kW) during major field operations such as plow tillage, rotary tillage, baling, bale wrapping, and to select the suitable pre-processing method for the analysis. A load measurement systems, equipped in the tractors, were consisted of strain-gauge, encoder, hydraulic pressure, and radar speed sensors to measure torque and rotational speed levels of transmission input shaft, PTO shaft, and driving axle shafts, pressure of the hydraulic inlet line, and travel speed, respectively. The entire sensor data were collected at a 200-Hz rate. Plow tillage, rotary tillage, baling, wrapping, and loader operations were selected as major field operations of agricultural tractors. Same or different farm works and driving levels were set differently for each of the load measuring experiment. Before load data analysis, pre-processing procedures such as outlier removal, low-pass filtering, and data division were performed. Data beyond the scope of the measuring range of the sensors and the operating range of the power transmission parts were removed. Considering engine and PTO rotational speeds, frequency components greater than 90, 60, and 60 Hz cut off frequencies were low-pass filtered for plow tillage, rotary tillage, and baler operations, respectively. Measured load data were divided into five parts: driving, working, implement up, implement down, and turning. Results of the study would provide useful information for load characteristics of tractors on major field operations.

• 농업과학연구
• /
• 제37권2호
• /
• pp.309-314
• /
• 2010

Bale is an operation of collecting livestock feed materials from field crop residue, and mechanization demand on the operation has been increased. Bailers imported from foreign countries such as Japan and European countries have been used, but those models showed improper performance in Korean situations. In recent years, a steel-roller type round baler attachable to medium size tractors(40 to 60 HP) for effective bale operation in Korea was developed. This study was conducted to evaluate field performance of the baler. For proper baling operation, engine speed was greater than 1,800rpm, average traction force and PTO torque were about 4kN and in a range of 380-671Nm, and maximum values were about 7kN and 3,000Nm, respectively. Performance evaluation tests for sudan grass, rice straw, and blue barley showed that field capacity was 0.59ha/h for blue barley and 0.99ha/h for sudan grass and rice straw. Bale weight, diameter, width, and bulk density were in ranges of 176.1~418.4kg, 1.07~1.12m, 1.02~1.04m, and 175.3~454.1kg/$m^3$. Noise sound level during the baling operation was 4dB greater than idle operation condition, which was considered to be ignorant.

• 한국초지조사료학회지
• /
• 제16권1호
• /
• pp.87-92
• /
• 1996

The quality of silages, made from whole crop barley, rye, spring oat, Italian ryeglass, orchardgrass, alfalfa and grass-legume pasture mixtures, were evaluated under two different conservation techniques in baled silage making (BS) and conventional silages(CS). Crops materials were harvested at the stage of the greatest dry matter accumulation(hard dough for barley, soft dough for rye and oat, late bloom for Italian ryegrass and others pasture species), and baled in a self constructed square baling chamber weighted by 25~30kg in dry matter basis. Each bales were wrapped with 0.05mm thick polyethylen plastic film and stored six months long in stack silos. Barley, rye, oat and Italian ryegrass including of pasture crops produced higher quality silages in the baled silage making, due to better organic acid fermentation and lower nutrient losses during the period of storage than those in the conventional silages. TDN contents of barley silages were 65.3% in BS and 63.7% in CS, NEL value of barley silages was improved hum 6.48MJ(CS) to 6.61MJ/kg(BS) in dry matter basis. Silage quality of rye, oat and pasture crops were also improved markedly in the baled silage utilization.

• 농업과학연구
• /
• 제40권1호
• /
• pp.53-59
• /
• 2013

Analysis of load data during field operations is highly important for optimum design of power drive lines for agricultural tractor. Objective of the paper was to analyze field load data using FFT to determine frequency and the energy levels of meaningful cyclic patterns. Rotary tillage, plowing, baling, and wrapping operations were selected as major field operations of agricultural tractor. An agricultural tractor with power measurement system was used. The tractor was equipped with strain-gauge sensors to measure torque of four driving axles and a PTO axle, speed sensors to measure rotational speed of the driving axles and an engine shaft, pressure sensors to measure pressure of hydraulic pumps, an I/O interface to acquire the sensor signals, and an embedded system to calculate power requirement. In rotary tillage, calculated frequency was decreased as travel speed increased. In baler operation, calculated frequency was increased as PTO speed was increased. The calculated peak frequency levels and expected levels were similar. Results of the study would provide information on power utilization patterns and on better design of power drive lines.

• The Plant Pathology Journal
• /
• 제37권3호
• /
• pp.243-257
• /
• 2021

Bacillus pumilus is the causal agent of trunk bulges disease affecting rubber and rubberwood quality and yield production. In this study, B. pumilus and other closely related species were included in B. pumilus group, as they shared over 99.5% similarity from 16S rRNA analysis. Multilocus sequence analysis (MLSA) of five housekeeping genes and repetitive elements-based polymerase chain reaction (rep-PCR) using REP, ERIC, and BOX primers conducted to analyze the diversity and systematic relationships of 20 isolates of B. pumilus group from four rubber tree plantations in Peninsular Malaysia (Serdang, Tanah Merah, Baling, and Rawang). Multi rep-PCR results revealed the genetic profiling among the B. pumilus group isolates, while MLSA results showed 98-100% similarity across the 20 isolates of B. pumilus group species. These 20 isolates, formerly established as B. pumilus, were found not to be grouped with B. pumilus. However, being distributed within distinctive groups of the B. pumilus group comprising of two clusters, A and B. Cluster A contained of 17 isolates close to B. altitudinis, whereas Cluster B consisted of three isolates attributed to B. safensis. This is the first MLSA and rep-PCR study on B. pumilus group, which provides an in-depth understanding of the diversity of these rubber-pathogenic isolates in Malaysia.

• 한국염색가공학회지
• /
• 제3권1호
• /
• pp.37-45
• /
• 1991

면직물의 Embossing 가공은 의류, 종이, 가죽 제품 등에 수요가 상당히 많고, Moire 및 Schreiner 가공은 의류에 이용되고 있다. 原布(grey)$\rightarrow$(2) 檢布(cloth inspection).標識(marking)$\rightarrow$((3) 節取(knotting), 修正(mending), 汚染빼기(stain removing)$\rightarrow$((4) 필이음(cloth sewing).rolling$\rightarrow$((5) 燒毛(singeing)v(6) 糊拔(desizing)$\rightarrow$((7) 水洗(washing)$\rightarrow$((8) 精練(scouring)$\rightarrow$((9) 水洗(washing)$\rightarrow$((10) 漂白(bleaching)$\rightarrow$((11) 水洗(washing)$\rightarrow$((12) 酸處理(souring)$\rightarrow$((13) 水洗(washing)$\rightarrow$((14) 打布(scutching)$\rightarrow$((15) 脫鹽素處理(dechlorination).水洗 (16) 螢光漂白(optical bleaching). 乾燥(drying)$\rightarrow$((17) Mercerizing.水洗.乾燥$\rightarrow$((18) 染色(dyeing).捺染(printing).水洗.乾燥$\rightarrow$((19) 樹脂液 padding 및 豫備乾燥$\rightarrow$((20) Embossing calendering(또는 moire calendering, schreiner miendering)$\rightarrow$((21) 熱處理(curing)$\rightarrow$((22) Soaping$\rightarrow$((23) 乾燥$\rightarrow$((24) 給混 (damping)$\rightarrow$((25) 幅내기$\rightarrow$((26) 最終檢布(final inspection)$\rightarrow$((27) 천접기(holding) $\rightarrow$((28) 整布(1필씩 짜르기)$\rightarrow$((29) 천감기(1필씩 또는 1권으로)$\rightarrow$((30) 商標붙이기(marking).包裝(packing).荷造(baling).出荷(forward)