• Journal of Power Electronics
• /
• 제14권2호
• /
• pp.315-323
• /
• 2014

An optimized space vector pulse width modulation (SVPWM) method with common mode voltage elimination and neutral point potential balancing is proposed for an open-end winding induction motor. The motor is fed from both of the ends with two neutral point clamped (NPC) three-level inverters. In order to eliminate the common mode voltage of the motor ends and balance the neutral point potential of the DC link, only zero common mode voltage vectors are used and a balancing control factor is gained from calculation in the strategy. In order to improve the harmonic characteristics of the output voltages and currents, the balancing control factor is regulated properly and the theoretical analysis is provided. Simulation and experimental results show that by adopting the proposed method, the common mode voltage can be completely eliminated, the neutral point potential can be accurately balanced and the harmonic performance for the output voltages and currents can be effectively improved.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2014년도 춘계학술발표대회
• /
• pp.249-251
• /
• 2014

This paper proposes a channel diversity based load-balancing cross-layer routing scheme for Wireless Mesh Networks (WMNs). The proposed scheme deals with channel diversity phase and load balancing phase in WMNs. Channel diversity factor $metric_{ch-d}$ and load balancing factor $f_{load}$ are defined and employed cooperatively as a combined path selection policy.

• 한국유체기계학회 논문집
• /
• 제12권6호
• /
• pp.41-46
• /
• 2009

This paper deals with the operating-speed (high-speed) balancing of a refinery gasoline HDS (hydrodesulfurization) process recycle-gas 8-stages compressor rotor. A low-speed balancing condition of the rotor was measured as maintaining the G2.5 level. But an inspection run of operating-speed balancing condition, using tilting-pad journal bearings of actual use, showed that while it could be continuously-operated safely at a rated speed of 10,500 rpm, the rotor would not be able to run over 11,000 rpm as the vibration increased very sharply, approaching 11,000 rpm. In order to cure that a series of operating-speed balancing, which first calculated balance correction-weights by applying the influence coefficient measured and calculated at 10,500 rpm and then implemented correction works, was carried-out. The final operating-speed balancing results showed that the vibrations at the bearing pedestals represented very good levels of 0.2 mm/s by decreasing to as much as the 1/10 of the original vibrations and particularly, even at a targeted maximum continuous operating speed, MCS, of 11,500 rpm the vibrations represented about 1 mm/s, which is the operating-speed balancing vibration specification of API. Therefore, the expansion of MCS was successfully accomplished through the operating-speed balancing.

• 한국생산제조학회지
• /
• 제26권1호
• /
• pp.114-120
• /
• 2017

In recent years, applications of high speed rotating bodies have diversified. It is necessary for a device rotating at high speed to be balanced to minimize vibration. It is necessary to reduce the unbalancing factor to evenly wind the yarn. In this study, we also attempted to devise a technique to minimize the unbalance that occurs while assembling the components of spindles and to simplify the balancing procedure in the field. To balance the spindle, the vibration of the rotating spindle was measured using a laser displacement meter. We also performed balancing using the influence coefficient method by considering the phase.

• 한국정보통신학회논문지
• /
• 제12권8호
• /
• pp.1349-1355
• /
• 2008

최근에 ZigBee, Bluetooth, RFID(Radio Frequency Identification)와 같은 근거 리 무선통신 시스템에 대한 연구가 활발히 진행되고 있으며, 이와 같은 시스템들은 대부분 소출력무선기기들이다. 미래에는 개인을 중심으로 하는 WPAN(Wireless Personal Area Network)을 위해서 더 많은 소출력 무선기기들이 출현할 것이며, 간섭저감기술은 소출력무선기기들이 한정된 주파수 자원을 효율적으로 이용하기 위한 필수 기술이 될 것으로 예상된다. 본 논문에서는 두 가지의 주파수를 공유 방법을 고려하였다. 첫 번째는 이미 특정 시스템에 할당된 주파수를 공유하는 경우이고, 두 번째는 새로운 주파수대역을 할당하는 경우이며, 이 두 가지 경우에 대한 효율적인 주파수 공유 방법을 연구하였다. 첫 번째 방법으로 주파수출 공유하는 경우의 한 가지 예로서 ZigBee, RPID, DCP(Digital Cordless Phone) 및 Bluetooth가 특정 주파수대역을 공유하는 경우 주파수 공유 조건을 검토하였다. 그리고 두 번째 공유 방법에서는 서로 다른 간섭저감기술을 사용하는 통신시스템에 대해서 공평한 신호 방사조건을 유지하기 위한 balancing factor의 개념을 제안하였으며, FH(Frequency Hopping) 시스템을 기준으로 하는 경우 LBT(Listen Before Talk)는 0.9, DS (Direct Spreading)은 0.8의 balancing factor를 이 용하면, 이들 간섭저감기술들 사이의 방사조건을 비슷하게 유지 할 수 있기 때문에 전체적으로 더 많은 시스템이 주파수를 공유할 수 있음을 보였다.

• 한국통신학회논문지
• /
• 제33권7A호
• /
• pp.757-767
• /
• 2008

차세대 이동 통신망의 발전으로 상용 망과 이 기종 망이 서로 겹쳐진 다중 망 구조가 형성될 것이다. 이러한 여러 망이 겹쳐진 다중 망 구조에서 전체 무선자원의 사용 효율을 높이고 Eb/Io (bit energy-to-interference plus noise density ratio)를 개선하기 위해 이기종망간 혹은 동종망간 상호 연동 기술이 필요하다. 본 논문에서는 이러한 동종망과 이기종망들이 서로 겹쳐져 있는 다중 셀 환경에서 load를 효율적으로 분산시킴으로써 무선 자원의 효율을 높이고 신호의 간섭양을 줄여 사용자의 QoS 보장 및 성능 개선을 위한 soft load balancing algorithm을 제안 및 분석한다. 본 논문에서는 수학적 분석을 통해 효율적인 load sharing을 위한 최적의 LBR (load balancing ratio) 을 구하고 이를 이용하여 각 network에 traffic 양을 할당하여 서비스한다. 그러므로 soft load balancing 알고리듬은 보다 안정적인 데이터 전송을 가능하게 한다.

• 한국정밀공학회지
• /
• 제22권7호
• /
• pp.112-121
• /
• 2005

This paper is concerned with smooth trajectory generation of biped robot which has inverted pendulum type balancing weight. Genetic algorithm is used to generate the trajectory of the leg and balancing weight. Balancing trajectory can be determined by solving the second order differential equation under the condition that the reference ZMP (Zero moment point) is settled. Reference ZMP effect on gait pattern absolutely but the problem is how to determine the reference ZMP. Genetic algorithm can find optimal solution under the high order nonlinear situation. Optimal trajectory is generated when use genetic algorithm which has some genes and a fitness function. In this paper, minimization of balancing joints motion is used for the fitness function and set the weight factor of the two balancing joints at the fitness function. Inverted pendulum type balancing weight is very similar with human and this model can be used fur humanoid robot. Simulation results show ZMP trajectory and the walking experiment made on the real biped robot IWR-IV.

• 농촌지도와개발
• /
• 제17권2호
• /
• pp.213-232
• /
• 2010

The regional development strategy of China is involved basically with national macro economical development policies. In general, the development process were The procedures of 'balancing development-unbalancing development- rebalancing development'. The first restructuring is a balancing development strategy represented as the three-district construction and the second restructuring is the unbalancing development strategy represented as the preferential development of the east area after reformation & development. The third regional development strategy making current progress is a new regional balancing development policy including the great development of the west district. The study grasped how much the regional balancing development policy contributed to bridge the gap among other areas with coefficient of variation to analyze changes of regional development related indexes among the areas before/after the regional balancing development policy which had been progressed after 1991 with harmonious development among areas as its goal was carried out. It was also analyzed that the Chinese government's goal of regional development policy was how well-suited to the Chinese reality through regression analysis, so far. However, the results obtained of the study were summarized in Table6, Table7 and Table8.

• 열처리공학회지
• /
• 제32권6호
• /
• pp.270-274
• /
• 2019

In this study, simulation structure analysis was performed for the differential gear system for passenger cars as a prerequisite for the design of the balancing module. The differential gear system was modeled by using CATIA and simulation structure analysis was performed using ANSYS software. The material of the modeled differential gear system uses the mechanical properties of S45C (Q&T). In the structural analysis of the differential gear, the areas where the maximum stress and the maximum strain occurred can be identified. The maximum stress and maximum strain occurred in the pitch circle of the bevel gear. In evaluating the safety factor, it was found that sufficient safety factor was secured. Based on the analysis results for the differential gear, it is expected that it will be a good reference if we design the balancing module device.

• 신재생에너지
• /
• 제16권4호
• /
• pp.41-48
• /
• 2020

This study performed a single hole operation method using a balancing well-cross-mixed underground heat exchanger, and conducted thermal performance studies of an SCW-type underground heat exchanger using a two-well. The study attempted to change the existing operating method of the two adjacent SCW underground heat exchangers with one ball each. The SCW-type geothermal heat exchanger is considered to enable up to 20% of bleed discharge at maximum load, which makes groundwater usage unequal. The efficiency factor of the geothermal system was improved by constructing the discharged water by cross-mixing two balancing wells to prevent the discharge of groundwater sources and keep the temperature of the underground heat exchanger constant. As a result of the cooling and heating operation with the existing SCW heat exchange system and the balancing well-cross-mixed heat exchange system, the measured performance coefficient improved by 23% and 12% in cooling and heating operations, respectively. In addition, when operating with a balanced cross-mixing heat exchange system, it has been confirmed that the initial basement temperature is constant with a standard deviation of 0.08 to 0.12℃.