• KIPS Transactions on Computer and Communication Systems
• /
• v.4 no.12
• /
• pp.409-414
• /
• 2015

The energy conservation is the most important subject for long run operation of the sensor nodes with limited power resources. Clustering is one of most energy efficient technique to grouped the sensor nodes into distinct cluster. But, in a cluster based WSN, CHs and gateways bear an extra work load to send the processed data to the sink. The inappropriate cluster formation may cause gateways overloaded and may increase latency in communication. In this paper, we propose a novel load balanced clustering model for improving energy efficiency and giving a guarantee of long network lifetime. We show the result of performance measurement experiments that designs using a branch and bound algorithm and a multi-start local search algorithm to compare with the existing load balanced clustering model.

• Journal of Soil and Groundwater Environment
• /
• v.21 no.3
• /
• pp.64-81
• /
• 2016

To analyze the influence of various groundwater flow rates (specific discharge) on BHE system with balanced and unbalanced energy loads under assuming same initial temperature (15℃) of ground and groundwater, numerical modeling using FEFLOW was used for this study. When groundwater flow is increased from 1 × 10⁻⁷ to 4 × 10⁻⁷m/s under balanced energy load, the performance of BHE system is improved about 26.7% in summer and 22.7% at winter time in a single BHE case as well as about 12.0~18.6% in summer and 7.6~8.7% in winter time depending on the number of boreholes in the grid, their array type, and bore hole separation in multiple BHE system case. In other words, the performance of BHE system is improved due to lower avT in summer and higher avT in winter time when groundwater flow becomes larger. On the contrary it is decreased owing to higher avT in summer and lower avT in winter time when the numbers of BHEs in an array are increased, Geothermal plume created at down-gradient area by groundwater flow is relatively small in balanced load condition while quite large in unbalanced load condition. Groundwater flow enhances in general the thermal efficiency by transferring heat away from the BHEs. Therefore it is highly required to obtain and to use adequate informations on hydrogeologic characterristics (K, S, hydraulic gradient, seasonal variation of groundwater temperature and water level) along with integrating groundwater flow and also hydrogeothermal properties (thermal conductivity, seasonal variation of ground temperatures etc.) of the relevant area for achieving the optimal design of BHE system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.9
• /
• pp.2340-2349
• /
• 2009

In this paper we proposed a hopping routing scheme to resolve the hot spot problem for periodic monitoring services in wireless sensor networks. Our hopping routing scheme constructs load balanced routing path, where an amount of energy consumption of all nodes in the sensor networks is predictable. Load balanced routing paths can be obtained from horizontal hopping transmission scheme which balances the load of the sensor nodes in the same area, and also from vertical hopping transmission scheme which balances the load of the sensor nodes in the other area. The direct transmission count numbers as load balancing parameter for vertical hopping transmission are derived using the energy consumption model of the sensor nodes. The experimental results show that the proposed hopping scheme resolves the hot spot problem effectively. The efficiency of hopping routing scheme is also shown by comparison with other routing scheme such as multi-hop, direct transmission and clustering.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.9
• /
• pp.3094-3109
• /
• 2014

This paper proposes a load balanced reliable routing protocol called LBR (Load Balanced Reliable routing) in wireless networks. The LBR protocol transmits messages through a reliable path considering the balancing of the traffic load. Recently, the authors have proposed a multipath-based reliable routing protocol called MRFR, which is an appealing protocol for fault tolerant reliable data transmission. However, However, MRFR has no concern with the problem of load balancing, which results in increasing congestion and consuming high energy at some network nodes. As a result, the problem affects negatively the performance of the network. Taking account of load balancing as a route selection criteria can avoid routing through the congested nodes and allows to find better routes. In this paper, we extend MRFR by considering load balancing in the route discovery process of reliable communication. The simulation results showed that the proposed protocol outperforms AODV in terms of end-to-end delay, packet delivery radio, and average jitter. Compared to MRFR, the LBR protocol has the same packet delivery ratio, and obtains a better efficiency of load balancing.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.4
• /
• pp.1237-1255
• /
• 2014

In wireless sensor networks (WSNs), hierarchical clustering is an efficient approach for lower energy consumption and extended network lifetime. In cluster-based multi-hop communications, a cluster head (CH) closer to the sink is loaded heavier than those CHs farther away from the sink. In order to balance the energy consumption among CHs, we development a novel cluster-based routing protocol for corona-structured wireless sensor networks. Based on the relaying traffic of each CH conveys, adequate radius for each corona can be determined through nearly balanced energy depletion analysis, which leads to balanced energy consumption among CHs. Simulation results demonstrate that our clustering approach effectively improves the network lifetime, residual energy and reduces the number of CH rotations in comparison with the MLCRA protocols.

• Journal of Soil and Groundwater Environment
• /
• v.21 no.6
• /
• pp.114-127
• /
• 2016

An increase of groundwater flux in BHE system creates that ground temperature (locT) becomes lower in summer and higher in winter time. In other words, it improves significantly the performance of BHE system. The size of thermal plume made up by advection driven-flow under the balanced energy load is relatively small in contrast to the unbalanced energy load where groundwater flow causes considerable change in the size of thermal plume as well ground temperature. The ground temperatures of the up gradient and down gradient BHEs under conduction only heat transport are same due to no groundwater flow. But a significant difference of the ground temperature is observed between the down gradient and up gradient BHE as a result of groundwater flow-driven thermal interference took placed in BHE field. As many BHEs are designed under the obscure assumption of negligible groundwater flow, failure to account for advection can cause inefficiencies in system design and operation. Therefore including groundwater flow in the design procedure is considered to be essential for thermal and economic sustain ability of the BHE system.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.210-213
• /
• 1999

A battery is the device that transforms the chemical energy into the direct-current electrical energy directly without a mechanical process. Unit cells are connected in series to obtain the necessary voltage, while being connected in parallel to organize capacity for load current and to decrease the internal resistance for corresponding the sudden shift of the load current. The circular-current, however, could be occurred when the system is driven in parallel. As a result, the new batteries are heated by over-change and discharge, and the over charge current makes to increase the rust of the positive grid and consequently the shortened life of the new batteris would be shown. In this paper, the internal resistance of charge and discharge will be balanced, through inserting the resistance into the system by way of calculation of the changed amount of internal resistance.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.6
• /
• pp.2208-2218
• /
• 2017

To resolve overload in a distribution system, a distribution system operator (DSO) often performs a load transfer using normally open tie points and switches in the distribution line. During this process, the distribution system is momentarily operated in closed-loop operation. A closed-loop current in the distribution system can cause a power failure due to excess breaking current in the circuit breakers and reclosers. Therefore, it is necessary to calculate the closed-loop current exactly. However, if there are a large number of distributed generation (DG) systems in the distribution system, such as energy storage systems (ESS), they might obstruct the closed-loop operation based on bidirectional power flow. For quick and precise operation of a closed-loop system, the ESS has to regulate the power generation while satisfying closed-loop operation in the worst cases. We propose a strategy for balanced power regulation of an ESS. Simulations were carried out using PSCAD/EMTDC, and the results were compared with calculation results.

• Structural Engineering and Mechanics
• /
• v.3 no.3
• /
• pp.255-272
• /
• 1995

The paper considers aspects of the energy dissipation response of selected realistic forms of torsionally balanced and torsionally unbalanced building systems, responding to an ensemble of strong-motion earthquake records. Focus is placed on the proportion of the input seismic energy which is dissipated hysteretically, and the distribution of this energy amongst the various lateral load-resisting structural elements. Systems considered comprise those in which torsional effects are discounted in the design, and systems designed for torsion by typical code-defined procedures as incorporated in the New Zealand seismic standard. It is concluded that torsional response has a fundamentally significant influence on the energy dissipation demand of the critical edge elements, and that therefore the allocation of appropriate levels of yielding strength to these elements is a paramount design consideration. Finally, it is suggested that energy-based response parameters be developed in order to assist evaluations of the effectiveness of code torsional provisions in controlling damage to key structural elements in severe earthquakes.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2008.10b
• /
• pp.507-511
• /
• 2008

Supporting energy efficiency and load balancing in wireless sensor network is the most important issue in devising the hierarchical routing protocols. Recently, the dual layered clustering scheme with GPS was proposed for the supporting of load balancing for cluster heads but there would be many collided messages in the overlapped area between two layers. Thereby, the purpose of this paper is to reduce the collision rate in the overlapped layer by concisely distinguish them with the same number of nodes in them. For the layer partition, this paper uses an equation $x^2+ y^2{\le}(\frac{R}{\sqrt{2\pi}})^2$ to distinguish layers. By using it, the scheme could efficiently distinguish two layers and gets the balanced number of elements in them. Therefore, the proposed routing scheme could prolong the overall network life cycle about 10% compared to the previous two layered clustering scheme.