• Journal of Dental Rehabilitation and Applied Science
• /
• v.29 no.1
• /
• pp.101-110
• /
• 2013

$T4K^{TM}$(Myofunctional Research Co, Australia) is one of the myofunctional appliance developed to be used in children of mixed dentition. Myofuncitonal appliance stimulate the facial, masticatory and tongue muscle and help to balance the muscular force. Labial bow included in the device exerts strength in excessively labial inclineded upper jaw, Lip bumper blocks strength of the mouth to prevent abnormal strength exerted in lower jaw, Tongue tag secures proper position of tongue, and additional exercise is not required for child patients. For the more, simpler design and softer texture of device prmoted cooperation of patients during use. This case report is to present the satisfactory results gained by using $T4K^{TM}$ on Class II patients. Comment 1. $T4K^{TM}$ was applied in Class II malocclusion patients of mixed dentition with expected space insufficient to gain facial improvement. 2. Excessive overjet, overbite were improved. 3. Main effects are regarded to have been achieved by development of lingual slant of upper jaw, labial slant of lower jaw, and lower part of jawbone. 4. Bad habits, such as mouth breathing, can also be adjusted.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.6D
• /
• pp.839-848
• /
• 2011

TBM (Tunnel Boring Machine) tunnel should be carry out with the adopted machine until the end of excavation because of impossibility of replacement or modification of machine. Observation of the face of the tunnel is difficult, especially in EPB(Earth Pressure Balance) shield TBM, predict changes in the ground condition with analyzing data, collected during the excavation, and it should be reflected in construction. Until recently, subjects of studies on TBM are mainly the determination of machine and the development of advance rate prediction model, according to the characteristics of ground which is the target of excavation. However, study focused on the estimation of ground conditions and the improvement in operational methods using excavation data of TBM equipment, the principal of the excavation, has been done not so much. This study examine the variances in advance rate depending on changes in operating conditions and evaluate the optimal operating conditions of adopt machine, using working data obtained from EPB shield TBM project. The result of this study is suggested as follows. First, cutter head RPM and total thrust force are biggest influences on advance rate, Second, it is recommended for proper advance rate that total thrust force is controlled while optimum cutter head RPM is kept, Third, according to the increasing trend of total thrust force, the changes in ground conditions can be predicted, the appropriate operating conditions can be determined.

• Communications of Mathematical Education
• /
• v.29 no.3
• /
• pp.281-300
• /
• 2015

The purpose of this research is to analyze cognitive demands, answer types, and storytelling types on the basis of mathematical tasks in five different mathematics textbooks based on 2009 revised curriculum in order to suggest directions for the development and use of storytelling mathematics textbooks in school. Results show that first, PNC (Procedures without Connections) task was the largest category in cognitive demands of all mathematical tasks, Low-Level task was larger than others in cognitive demands of mathematical content tasks, and High-Level task was larger than others in cognitive demands of mathematical activity tasks. Second, a short-answer type was the largest category in answer types of all mathematical tasks, the majority of mathematical content tasks were a short-answer type, and the majority of mathematical activity tasks were both short-answer and explanation-answer types. Finally, storytelling connected to real-life was the largest category in storytelling types, and the number of mathematical activity tasks was less than that of mathematical content tasks. However, in the tasks reflected on storytelling, the percentage of mathematical activity tasks was higher than that of mathematical content tasks. Based on the results, while developing storytelling mathematics textbooks and using storytelling textbooks in school, it suggests to consider the need for balance and diversity in cognitive demands, answer types, and storytelling types according to mathematical tasks.

• School Mathematics
• /
• v.19 no.1
• /
• pp.19-41
• /
• 2017

The purpose of this article was to a) identify how preservice teachers conceive feedbacks and subsequent classroom discourses, and b) compare them with those in reform-oriented mathematics classroom video for mathematics teachers' professional development about classroom discourse. This article analyzes feedback patterns and subsequent classroom discourses in preservice teachers' imaginary classroom scripts (lesson plays) and compares them with those in the reform-oriented classroom video dealing with the same teaching situation. Most of the preservice teachers' feedbacks focused the evaluation of students' responses and transmission of meaning (univocal function), whereas the teacher's feedback in the reform-oriented classroom allowed the whole class to validate or challenge the answers, thereby facilitating students' generation of meaning (dialogic function). The comparison analysis between the univocal discourse in a preservice teacher's lesson play and the dialogical discourse in the reform-oriented classroom video shows that teacher feedback serves as an important indicator for the main function of classroom discourse and the levels of students' cognitive participation, and also as a variable that determines and changes them. This case study suggests that to improve the quality of classroom discourse, preservice and in-service teachers need experience of perceiving the variety of feedback patterns available in specific teaching contexts and exploring ways to balance the univocal and dialogical functioning in their feedback move during the teacher training courses.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.48 no.1
• /
• pp.100-110
• /
• 2016

Alkaline Peroxide Mechanical Pulping (APMP) of Pinus densiflora harvested from domestic mountains was explored. APMP contributes to various advantages including pulp quality, elimination of the need for a bleaching process, and energy savings. Sequential treatment of impregnation of bleaching chemicals and refining not only overcome the concern of alkaline darkening of wood chips during chemical impregnation, but it also brightens the chips to the desired brightness levels suitable for writing and printing papers. APMP pulping from Pinus densiflora was greatly influenced by the dosage levels of hydrogen peroxide and sodium hydroxide. Alkaline peroxide treatment was carried out by applying one of three levels of hydrogen peroxide (1.5, 3, and 4.5% based on the oven-dried weight of the wood chips) and one of three levels of sodium hydroxide (1.5, 3, and 4.5% based on the oven-dried weight of the wood chips). Other chemicals including a peroxide stabilizers and metal chelation were constantly added for all treatments. Chemical treatment with a liquor-to-wood ration of 9:1 was carried out in a laboratory digestor. Compared to BTMP, APMP pulping displayed outstanding characteristics including the less requirement of refining energy, the better improvement of tensile strength, the more reduction of shives, and the greater increase of pulp brightness. In particular, when 4.5% of hydrogen peroxide with impregnation during 90 minutes was used, the brightness of APMP reached 64.9% ISO. Even though bulk of APMP was decreased with the increase of sodium hydroxide, a better and improved balance could be achieved between optical and strength properties. The spent liquor obtained from the discharge of the impregnation process at the dosage level of 4.5% hydrogen peroxide exhibited an equal level of residual peroxide with BTMP. In conclusion, APMP pulping showed successful results with Pinus densiflora due to its better response to the development of optical and physical properties compared to TMP pulping.

• Membrane Journal
• /
• v.20 no.1
• /
• pp.29-39
• /
• 2010

This study focuses on the modeling of DMFC to predict the characteristics and to improve its performance. This modeling requires deep understanding of the design and operating parameters that influence on the cell potential. Furthermore, the knowledge with reference to electrochemistry, transport phenomena and fluid dynamics should be employed for the duration of mathematical description of the given process. Considering the fact that MEA is the nucleus of DMFC, special attention was made to the development of mathematical model of MEA. Multiscale modeling is comprised of process modeling as well as a computational fluid dynamics (CFD) modeling. The CFD packages and process simulation tools are used in simulating the steady-state process. The process simulation tool calculates theelectrochemical kinetics as well as the change of fractions, and at the same time, CFD calculates various balance equations. The integrated simulation with multiscal modeling explains experimental observations of transparent DMFC.

• Korean Journal of Health Education and Promotion
• /
• v.16 no.1
• /
• pp.83-100
• /
• 1999

Modern technology has lessened the physical demand of every activities. Thus, physical inactivity has led to a rise in ‘Hypokinetic diseases’. The prefix, hypo, means lack of and kinetic refers to movement. Individuals who do not exercise regularly are at greater risk of developing hypokinetic diseases such as coronary heart disease, hypertension, hyperlipidemia, obesity, musculoskeletal disease. Systematic exercise program defenses development of hypokinetic diseases. Exercise program bases on basic physical fitness test. The physical fitness evaluation is used to degree of Wellness of the individuals. It includes the evaluation of Health-Related Physical Fitness -musclular strength, muscular endurance, flexibility, cardiorespiratory endurance, body composition - and skill or sports related fitness -agility, balance, coordination, reaction time, speed. In present study, the authors investigated health-related physical fitness test result and questionnaire for 133 male and 71 female from Jannuary 16 to March 15, 1997. The purpose of this study is to observe relationship health related physical fitness and self-perceived health status. The results are as follows. 1. There were statistically significant differences in BMI, grip strength, back strength, muscular endurance, cardiorespiratory endurance, and flexibility between male and female subjects. Flexibility is higher in female than male subject, but Others are higher in male than female subjects. 2. There were statistically significant differences in grip strength, muscular endurance between 30s, 40s, and 50s group In both gender subjects, and In cardiorespiratoryendurance between the groups especially in Female subjects. 3. For male subjects, flexibilitywas measured lower in group who classified low level in self-perceived health status than group of others. Also, for female, subjects, Muscular endurance ＆ flexibility were measured. 4. It was shown that grip strength, back strength, and muscular endurance were significantly lower in group who have chronic diseases than normal group for Male subjects. But, For female subjects, all the component were statistically insignificant results between normal and disease group. 5. Both male and female subjects, there were Positive correlation among grip strength, back strength, muscular endurance, cardiorespiratory endurance, and flexibility but, negative correlation for age. Therefore, health-related physical fitness is very important component for Heath Promotion ＆ Wellness. Physical Fitness test is valuable test in health evaluation, health management and health promotion, so available for hospital, sports center, community health center, industrial field, school etc.

• Journal of the Korea Concrete Institute
• /
• v.20 no.5
• /
• pp.653-660
• /
• 2008

The purpose of this study is to analyze the optimal mix design of the sound absorption material that is made from perlite and various binder systems for noise barrier wall. The polymer cement slurry which is made from two types of polymer dispersions, and silicone type inorganic material are used as binder. The test specimens are prepared with various polymer cement ratios, binder ratios, and tested for strengths, freezing and thawing and sound absorption performance by the tube and the reverberation room methods. From the test results, the difference of sound absorption coefficient by the tube method is a little recognized, however, noise reduction coefficient (NRC) of test specimens bound by the polymer cement slurry is in the ranges of 0.48 to 0.51. They are a little higher than those bound by cement only, and are lower values than recommended value of 0.7 by the Ministry of Environment. However, the sound absorption coefficient of test specimens at low frequency range of 250 to 500 Hz by reverberation room method shows very high values as 0.84 to 1.00, and 0.57 to 0.77 at the high frequency. The test specimens with polymer cement slurry binder have a good balance between performance and cost, and have proper properties in strengths, freezing and thawing resistance as sound absorption material for noise barrier wall. It is apparent that the good sound absorption material can be produced according to the optimum mix design that is recommended from this study.

• Korean Journal of Soil Science and Fertilizer
• /
• v.38 no.1
• /
• pp.52-57
• /
• 2005

Previous studies showed that shell meal fertilizer from the oyster farming industry could be a potential inorganic soil amendment to increase Chinese cabbage productivity and to restore the soil nutrient balance in upland soil (Lee et al., 2004). Herein, shell meal fertilizer was applied at rates of 0, 4, 8, 12, and $16Mg\;ha^{-1}$ to upland soil (Pyeontaeg series, Fine silty, Typic Endoaquepts) for Chinese cabbage cultivation. We found available phosphate increased significantly with shell meal fertilizer application, due to high content of phosphate ($1.5g\;P_2O_5\;kg^{-1}$) in the applied shell meal fertilizer. In addition, high pH of shell meal fertilizer contributed to increase available phosphate content by neutralization of acidic soil. Total and residual P contents increased significantly with increasing shell meal fertilizer application, but we could not find any tendency in organic and inorganic P fraction. Of extractable P fraction, water-soluble phosphorus (W-P) and calcium-bound P (Ca-P) contents increased significantly with increasing application level. By contrast, aluminum and iron-bound P (Al-P and Fe-P) decreased slightly with shell meal application. The present experiment indicated that shell meal fertilizer had a positive benefit on increasing available phosphate content in arable soil. And so the increased available phosphate by shell meal fertilizer may decrease phosphate application level and then reduce phosphorus loss in arable soil.

• Korean Journal of Soil Science and Fertilizer
• /
• v.38 no.1
• /
• pp.45-51
• /
• 2005

As a silicate source to rice, a coal ash (50%) was mixed with a phosphogypsum (hereafter, gypsum, 50%). Field experiments were carried out to evaluate rice (Oryza sativa) productivity in silt loam (SiL) to which 0, 20, 40 and $60Mg\;ha^{-1}$ of the mixture were added. The mixture increased rice yield and showed the highest yields following the addition of $30Mg\;ha^{-1}$. The mixture did not result in an excessive uptake of heavy metals by the rice grain. The mixture improved available silicate and phosphate and exchangeable calcium contents in soil. The available boron content in soil increased with the mixture application levels up to $1.42mg\;kg^{-1}$ following the application of $60Mg\;ha^{-1}$, but boron toxicity in rice was not found. It is concluded that the coal ash and gypsum mixture could be a good alternative to inorganic soil amendments to restore the soil nutrient balance in paddy soil.