• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.8
• /
• pp.1248-1256
• /
• 2014

The purpose of this study was to investigate the mechanisms of behind $SO_2$ formation and elevated cause of reducing power in purple bamboo salt (PBS) along with an analysis of physicochemical properties, content of sulfur compounds, oxidation reduction potential (ORP), mineral contents of salt type (MSS, mudflat solar salt; BS, bamboo salt), and addition of raw bamboo (RB). $SO_2$ content of 630 ppm was detected in PBS. $SO_2$ was not detected in MSS, BS, or RB, whereas $SO_2$ (782 ppm) from $K_2SO_4$ was detected after heating a NaCl, KCl, $MgCl_2$, $MgSO_4$, MgO, $CaCl_2$, $K_2SO_4$, and $FeSO_4$ with RB. $SO_2$ content of BS increased with baking time, and it originated from BSRB1 (13.88 ppm) to BSRB4 (109.13 ppm). $SO_3{^{2-}}$ originated only from MSSRB4 and BSRB2~BSRB4. Sulfate ion content decreased along with increasing $SO_2$ and sulfite ion contents. ORP increased with baking time of MSS and BS, and it was present at higher levels in BSRB4 (-211.40 mV) of BS than MSS. Insoluble content was higher in BS than MSS. Further, Ca, K, and Mg ion contents decreased in MSS and increased in BS with baking time. BSRB4 had 1.4 fold higher levels of Ca, 1.5 fold higher levels of Mg, and 1.8 fold higher levels of K than BS. Li, Al, Mn, Fe, and Sr in MSS as well as Al, Fe, and Ni in BS increased with baking time. Anions (Cl, $NO_3$, and Br) and heavy metals (Pb, Cd, Hg, and As) between MSS and BS were not significantly different. These results suggest that the reducing power of BS was due to $SO_2$ and sulfite ion. To increase the amounts of these compounds and reducing power, higher melting temperature and longer baking time are necessary along with BS, which is created by the addition of RB to roasted salt.

• Textile Coloration and Finishing
• /
• v.19 no.6
• /
• pp.21-27
• /
• 2007

The factors which affect the absorption and diffusion of disperse dye in print paste for polyester film were investigated using film roll method. When Emvatex print paste of different disperse dye concentrations were fixed by high temperature steaming(HTS) for 2 hr at $190^{\circ}C$, the dye uptake and diffusion distance of 50g/kg dye concentration for PET film were very low, but those of 100$\sim$300g/kg were increased with increasing dye concentration. It was found that sodium alginate(5%) was more effective for the absorption and diffusion of disperse dye to PET film than CMC(3%) and Emvatex(18%), and Emvatex showed comparatively low absorption in three thickeners used. The dye uptake and diffusion distance of disperse dye in sodium alginate paste for PET film were increased with increasing paste thickness to $160\sim180{\mu}m$, but were decreased at $200\sim220{\mu}m$ in both fixations of baking and HTS for 2 hr at $190^{\circ}C$, and were far more largely increased by fixation of HTS than baking because steam was very important for fixation. Also it was confirmed that dye uptake was slightly increased as steam supply pressure was raised from 1 $kg/cm^2$ to 2 $kg/cm^2$, andthe dye uptake and diffusion distance of disperse dye were outstandingly increased with raising fixing temperature from $170^{\circ}C$ to $190^{\circ}C$ and fixing time from 0.5 hr to 3 hr in the fixation of HTS.

• Korean Journal of Food Science and Technology
• /
• v.36 no.5
• /
• pp.749-753
• /
• 2004

Effects of olive oil on rheological properties of wheat flour dough were investigated through farinograph, amylograph, and extensograph, and by measuring wheat flour dough fermentation volume. Farinogram showed development time, stability, elasticity, and valorimeter value of olive oil-added wheat flour decreased, whereas water absorption and stability were similar to control (shortening 4%). Gelatinization temperature and maximum viscosity of wheat flour dough with olive oil decreased more than those of control as revealed by amylogram. Extensogram showed wheat flour area increased, whereas dough volume decreased in olive oil-added wheat flour dough.

• Culinary science and hospitality research
• /
• v.22 no.8
• /
• pp.157-171
• /
• 2016

The purpose of this study was to investigate the effect of educational environment on job on the educational satisfaction and recommendation toward the educational service among the students who are major in cooking and confectionery bakery in Busan area. In addition, current student conducted to perform the moderating effect of part-time condition. In order to achieve the purpose of current study total 299 students of 2-year college students were employed and it was educational statistically analysed using SPSS 20.0 program. Three-step hierarchical regression analysis was employed to check whether the major part-time job experience had a moderating impact or not. The results showed that there was a positive correlation between the educational environment and educational satisfaction, and the adjustment effect was partially adopted in the educational environment. Eurthermore, the part-time condition has positive influence on the relationship between environmental element and educational1 satisfaction, so the moderating effect was verified. These results will be contributed to provide marketing strategy to improve the educational environment service for students as well as related foodservice industry.

• Korean journal of food and cookery science
• /
• v.22 no.3 s.93
• /
• pp.270-281
• /
• 2006

The study investigated the effect of prefermentation of Bifidobacteria longum and Lactobacillus plantarum on baking quality. Firstly, two kinds of prefermentation were cultured using two lactic acid bacteria, Bifidobacteria longum and Lactobacillus plantarum. White pan bread baked with dough that had undergone these two prefermentation methods was compared with that baked with a non-prefermented control. The physicochemical properties of the three breads were analyzed, and then the physicochemical and sensory properties of the dough and baked bread were cross-analyzed. The pH prefermentation of Bifidobacteria longum was lower than that of Lactobacillus plantarum, whereas the titratable acidity was higher. Compared to the results from analyzing the prefermentation of Lactobacillus plantarum, the prefermentation of Bifidobacteria longum was expected to give positive effects on enriching the bread flavor by creating acetic acid at a level three- to eight-fold higher than that of Lactobacillus plantarum. According to the mixogram data, the optimum ending time for both Bifidobacteria longum prefermentation and Lactobacillus plantarum was around 4.5 to 5 minutes. The speed of dough materialization decreased with increasing prefermentation culture time. The baked bread with added Bifidobacteria longum had a higher water content. However, the other contents were not influenced by prefermentation, but were by culture time. The specific loaf volume, oven spring and baking lass rate all peaked at 20 hours after culture for both prefermentation cultures. The sensory test results indicated the highest prefermentation for the bread baked with prefermented Bifidobacteria longum doughwith a culture time ranging from 20 to 26 hours. In addition, the bread baked with prefermented Lactobacillus plantarum dough gave the highest preference when cultured for 20 hours.

• Journal of the East Asian Society of Dietary Life
• /
• v.20 no.2
• /
• pp.299-306
• /
• 2010

This study was carried out to investigate the quality of white pan bread as affected by various amounts of Sunsik powder, in which the breads were prepared with 0, 5, 10 and 15% Sunsik powder. The samples compared quality characteristics, including proximate composition, weight and height, fermentation time, baking loss rate, texture, sensory evaluation in order to determine the optimal amount of Sunsik powder in the formulation. The moisture content of control bread was higher, in the breads made with Sunsik powder. The baking loss rate decreased with increasing Sunsik powder concentration. The fermentation time of the bread increased with increasing Sunsik powder content. In sensory quality, the bread containing 5% Sunsik powder was preferred over the control bread, by color, taste, flavor and softness, while the 15% Sunsik powder bread had the lowest preference scores. Textural properties by TPA(texture profile analysis) showed that hardness, gumminess, chewiness increased with increased Sunsik powder concentration.

• Korean Journal of Food Science and Technology
• /
• v.15 no.3
• /
• pp.269-276
• /
• 1983

Experiments were performed to study the rheological and baking properties of bread fortified with various amounts of filefish protein concentrate (FPC). Doughs were prepared from mixtures containing wheat flour and 5,10,15 and 20% of FPC. Standard methods were used to evaluate the rheology of doughs and characteristics of bread. The results were as follows. 1. The water absorption of the fortified doughs increased as FPC increased. FPC caused an increase in development time and stability as measured by Farinograph. 2. In the extensigraph test, FPC yielded a decrease in extensibility and an increase in resistance to extension. 3. Baking tests demonstrated that addition of FPC decreased the volume of loaf and made the crumb darker and coarser. 4. Additional tests were made to examine effect of sodium stearoyl lactylate (SSL) added at 0.25, 0.50, 1.00 and 2.00% on doughs containing 10% headed & gutted FPC. The most appropriate amount of SSL as an additive was 0.5%. 5. In the farinograph, adding 0.5% SSL could delay dough development time and greatly increase stability. 6. When 0.5% SSL was added on doughs containing 5,10,15 and 20% headed & gutted FPC, baking quality was greatly improved. The breads containing up to 10% were acceptable by the addition of SSL, but not in higher level of FPC. 7. The results of sensory evaluations of bread showed that the color, texture and taste of bread containing 5% whole FPC and 5, 10% headed & gutted FPC were reasonably gacceptable.

• Journal of Environmental Science International
• /
• v.21 no.8
• /
• pp.901-907
• /
• 2012

The objective of this study was to evaluate bacteria removal ability of the metallic silver which was baked silver ion impregnated ceramic filter at heating condition. Silver leaking from baked ceramic filter was tested to sustain bacteria removal for a long time. Silver impregnated ceramic filter could remove E. coli completely at $10^{12}$ MPN/100ml to $10^{13}$ MPN/100ml of influent. However, ceramic filter without silver did not remove E. coli completely under the same condition. After baking, the silver impregnated ceramic filter almost didn't leak out the silver ion from filter. Photo of TEM (Transmission Electron Microscopy) showed that absorbed silver ions remained in ceramic filter after baking process and most of silver were less than 10 nm. According to the increase in the amount of silver in the ceramic filter, removal efficiencies of E. coli were increased but turbidity removal was decreased. It can be accounted that increased removal efficiency of E. coli was from disinfection of silver that is in the ceramic filter. Simulated concentrations of bacteria agree well with the observed experimental effluent concentration data. Moreover, first-order decay coefficients increased to 0.0034/min after silver was added in the ceramic filter. Increase of first-order decay coefficient proves that silver-added ceramic filter can remove bacteria easily.

• Korean Journal of Food Science and Technology
• /
• v.11 no.2
• /
• pp.99-104
• /
• 1979

Rheolegical and baking properties of blends containing 10, 20 and 30 % of rice flours (Milyang 23, non-waxy and Tongil waxy) with wheat flour were investigated. Milyang-wheat blends showed higher amylograph paste viscosities at all reference points than waxy-wheat blends. Rice-wheat four blends had shorter farinograph stability than f·heat flour; however, the dough development time was similar between two blends. Breads produced from either Milyang-wheat or waxy-wheat flour blends at 10% rice level were acceptable compared with breads produced from wheat flour.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.159-160
• /
• 2000

A new manufacturing method using laser transfer technology was developed for a color filter of TFT-LCD. This method can make red, green and blue color layer at the same time without several baking processes. Simple process, no residue, good edge profile, and so on are merits of this process. The same performances (such as color characteristics, reliability, hardness and so on) of current color filter were achieved with this process.