• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.6
• /
• pp.661-667
• /
• 2004

The control of tilt angle for nematic liquid crystal (NLC) with negative and positive dielectric anisotropy on the rubbed homeotropic polyimide (PI) using baking method by hot plate equipment was investigated. LC tilt angle decreased with increasing baking temperature and time. Especially, the low LC tilt angle of positive type NLC (Δ$\varepsilon$＞0) on the rubbed homeotropic PI surface by increasing temperature and time was measured. The tilt angle of positive type NLC(Δ$\varepsilon$＞0) is smaller than that of the negative type (Δ$\varepsilon$＞0) on rubbed PI with increasing baking temperature and time. We consider that the tilt angle of NLC is decreased due to increasing the steric interaction between horizon component of permittivity $\varepsilon$ = of NLC and the stress of polymer side chain by high temperature. As the increase of baking temperature, we obtain that AFM (atomic force microscope) image of rubbed PI surface using Hot-plate method has formed better solid micro-groove structure than oven method.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47 no.1
• /
• pp.13-20
• /
• 2002

Bread baking parameters and relationships between bread baking properties and flour characteristics were evaluated for two years, 1997 and 1998, and at two locations, Suwon and Deokso, with Korean winter wheat cultivars and lines. Among the bread baking parameters, lightness of crumb grain showed differences between years. No significant differences were found in dough mixing time, bread loaf volume, crumb grain score or firmness. Keumkangmil, Suwon 278 and Tapdongmil showed higher bread loaf volume, good structure of crumb grain and softer crumb firmness. However, compared to commercial flours for baking, cultivar means averaged over years and locations of nineteen Korean winter wheats showed poor bread baking quality because of low protein content and unsuitable protein quality. Protein content and flour swelling volume showed better relationships with the bread baking parameters than other flour characteristics. Friabilin-absence lines showed softer crumb firmness than those of friabilin-presence lines.

• Korean Journal of Food Science and Technology
• /
• v.20 no.6
• /
• pp.890-894
• /
• 1988

The baking quality of flours produced from Dark Northern Spring(DNS). Hard Red Winter(HRW) and Australian Standard White(ASW) were examined. To improve the baking quality of HRW and ASW, oxidants such as dehydroascorbic acid(DHA) and potassium bromate$(KBrO_3)$ were added. The protein content of HRW was about 3% higher than that of ASW but the specific volume of the baked gluten extracted from HRW and ASW were nearly same. By addition of DHA 100ppm and $KBrO_3$ 50ppm as oxidants to HRW and ASW, the farinogram's stability was strengthened and departure time, time to breakdown were extended. The specific volume of the bread based on HRW was very small but it was improved significantly by addition of oxidants. According to the quality scoring of bread, the breads based on DNS, HRW and ASW were 93, 72 and 75, respectively. The baking quality of HRW was improved by DHA and $KBrO_3$ but not much in ASW.

• Korean journal of food and cookery science
• /
• v.26 no.1
• /
• pp.32-40
• /
• 2010

This study was performed to determine the quality characteristics of mugwort-Sulgi with added chemical leavening agents. Mugwort-Sulgi was prepared with different levels of baking soda (0.3, 0.6, and 0.9%) and baking powder (0.3, 0.6, and 0.9%) and stored for 4 days. The a value significantly decreased with the addition of baking soda, and the b value significantly decreased over storage time. The pH value was significantly increased by the addition of baking soda, and significantly decreased with baking powder. The rate of swelling and poring was significantly increased with the addition of baking powder, and significantly decreased with baking soda. Hardness, springiness, cohesiveness, and gumminess were significantly increased with the addition of baking soda, while it significantly decreased with the addition of baking powder. According to sensory evaluation, taste, texture, and overall acceptance were highest in mugwort-Sulgi with 0.6% baking powder.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.67-70
• /
• 2003

The control of tilt angle for nematic liquid crystal (NLC) with negative and positive dielectric anisotropy on the rubbed homeotropic polyimide (PI) using baking method by hot plate equipment was investigated. LC tilt angle decreased with increasing baking temperature and time. Especially, the low LC tilt angle of positive type NLC ($\Delta\varepsilon$ >0) on the rubbed homeotropic PI surface by increasing temperature and time was measured. The tilt angle of positive type NLC ($\Delta\varepsilon$ >0) is smaller than that of the negative type ($\Delta\varepsilon$ >0) on rubbed PI with increasing baking temperature and time. We consider that the tilt angle of NLC is decreased due to increasing the steric interaction between horizon component of permittivity $\varepsilon$ = of NLC and the stress of polymer side chain by high temperature.

• The Korean Journal of Food And Nutrition
• /
• v.32 no.4
• /
• pp.371-378
• /
• 2019

This paper investigated the effects of the percentages of yeast and fermentation time as well as the top and bottom temperature of oven on the baking properties of rice bread. The specific volume of the dough decreased as the amount of added yeast and fermentation time increased. When 1.5% yeast was added at 60 min of fermentation time, the shape of the rice bread showed the largest volume, high appearance and a round shape. The top and bottom temperature of the oven on the baking characteristics of rice bread were affected by the baking time. When the top and bottom temperature of the oven at 200 and $140^{\circ}C$, and 200 and $170^{\circ}C$, the baking time was 20 min. When the top and bottom temperature of oven at 140 and $170^{\circ}C$, the baking time was 40 min. When the top and bottom temperature of the oven were 170 and $170^{\circ}C$, the shape of the rice bread indicated the largest volume, high appearance and a round shape. The results of this study revealed that the replacement of rice flour with 1.5% yeast, 60 min of fermentation time, and the top and bottom temperature of oven at $170-170^{\circ}C$ are effective for rice bread.

• Food Science and Industry
• /
• v.45 no.4
• /
• pp.16-20
• /
• 2012

Although the technology of breadmaking simply goes through the process of mixing, fermentation, and baking, it is very hard to make a same product every day. The reason is that baking science begins with the very first process of breadmaking which is mixing, and every steps and working environments are so closely connected. The baking science has developed in short time since the theory of fermentation has released. If you check the development of baking technology synthetically, it is consisted of the discovery of nutritional and functional ingredients, the optimization process of new machines, and the maintenance of the quality as fulfilling social demands. Because the baking business is making and selling the product, baking itself is a business, and it has the form that manufacturing and service business coexist. In today's current domestic bakery market, the supply exceeds the demand. Moreover, the concept of bakery itself has been changing from the fixed image of bakery which is selling the bread to the differentiated bakery with others. As we look at the general bakery's trends, it is focused on going back to the basic or traditions, going to the functional, and working with automations. To conclude, the baking has a long history, but it actually has the short history in the technological development. Baking business can be viewed as the simple business, but many factors are related to the business. It has a few basic kinds of products in baking, but it has diverse kinds of products with the base of infinite creativity. Even though it is physically a hard working business, it is also a business that can face with fun. For managing a bakery, finally, the differentiated strategy with other bakery that maximizes the customers' value is needed.

• Journal of the Korea Institute of Building Construction
• /
• v.4 no.2
• /
• pp.143-149
• /
• 2004

The recycle of domestic waste concrete is, however, still in an early stage, and it has been only partially being used for the road fillers. As a counter-plan of activating recycled concrete, we have confirmed the hydration possibility of the waste concrete powder from the experiment on recycling the aggregate powder since 2000. Though that study, we have known that the strength is increasing when the baking time is longer, and baking temperature maintain in $700^{\circ}C$. Also, the quality is lowered because of the fine aggregate powder which has a bad influence on flowability & compression strength by adhesion of mortar on the aggregate face. Therefore, mortar and interfacial separation of aggregate are large in proper quality for concrete recycling is expected that affect. The purpose of this study is to investigate effective aggregate separation and to determine the most suitable production method controlling the duration of baking time for recycled cement from the compressive strength, X-ray diffraction and ingredient analysis test.

• The Korean Journal of Food And Nutrition
• /
• v.24 no.4
• /
• pp.509-519
• /
• 2011

The purpose of this study was to investigate the use behavior and satisfaction of home-baking premix products. A total of 275 questionnaires were completed and statistically analyzed by the SPSS 14.0 package. The reasons for home-baking were : fun(33.8%), quality time with the family(33.8%), and distrust in foodstuffs(13.5%). The respondents(38.9%) used home-baking premix products 2~3 times per year. And the respondents purchased home-baking premix products primarily for snack foods(83.3%). Among the selection attributes of home-baking premix products, the respondents considered the importance of 'sanitation'(m=4.16) a top priority, followed by 'taste'(m=4.15), 'ease of use'(m=4.12), 'detailed instructions' (m=4.05), 'quality of raw materials'(m=4.04), and 'origin'(m=3.91). However, in the case of satisfaction, 'ease of use' (m=3.81) was the most satisfying aspect, followed by 'detailed instructions'(m=3.67), 'sanitation'(m=3.56) and 'manufacturer' (m=3.48). According to importance-performance analysis(IPA), 'quality of raw materials' and 'origin', which were selection attributes, should be quickly improved. Also, 'taste', 'ease of use', 'detailed instructions' and 'sanitation' should be maintained. This survey found that the satisfaction levels for home-baking premix product selection attributes had a significant influence on overall satisfaction($F$=7.91, $p$ <0.001). In particular taste(${\beta}$=0.32, $t$=3.53, $p$ <0.001) had a meaningful effect on overall satisfaction. In addition, the satisfaction levels for home-baking premix product selection attributes affected repurchase intention($F$=8.61, $p$ <0.001).

• Journal of Welding and Joining
• /
• v.29 no.6
• /
• pp.49-55
• /
• 2011

With the development of pre-painted steel sheets for automotive body application, a new joining method is required such as hybrid joining with combination of adhesive bonding and mechanical joining. The objective of this study is to investigate the effect of pre- and post-baking of adhesive bonding on failure mode and strength of hybrid joining of automotive steel sheets. Experiments show that the hybrid joining exhibits better bonding strength and displacement than conventional adhesive joining and mechanical fastening each. Comparison of pre- and post-baked hybrid joining results suggested that baking at $160^{\circ}C$ after mechanical joining was found to have higher joining properties than pre-baking condition. The prebaking condition changed its fracture mode from interfacial to button fracture. The changes in fracture mode with post-baking of hybrid joining was attributed to variation in neck thickness and undercut of joint.