• 복식문화연구
• /
• 제14권5호
• /
• pp.840-849
• /
• 2006

Breast volume has been approximately estimated under the assumption that the shape of breast is a corn. However, women's breast is more like a bulged bag in reality. In this paper, three methods of breast volume estimation were compared to find out the more accurate method. The shape of the breast is assumed as a hemisphere in the first estimation method and a corn in the second one. In the third method, arc along the cross sectional shape of breast was utilized in the calculation. Comparisons among the methods were made using the actual 3D volume measurement of thirty seven women's breast. As results, the third method was the best one for the normal breast type, especially for the lower part of the breast ($R^2=0.74$) which is the crucial design parameter of the brassiere. Assumption of the shape of breast as a corn was reasonably acceptable when the breast is sagged. It was expected that when women wore brassiere, the accuracy of the third method would increase more, since the shape of breast becomes more symmetrical.

• Journal of electromagnetic engineering and science
• /
• 제18권1호
• /
• pp.7-12
• /
• 2018

This article proposes an ultrahigh frequency band radio frequency identification (RFID) tag antenna for drug runout management that can be used in hospitals. The RFID tag antenna is designed to function as a sensor that alerts drug runout when a drug inside a drip chamber is completely consumed but does not work when a drug remains inside a drop chamber. A previously proposed 915 MHz dipole antenna, is too large to be attached to the drip chamber of a feeding bag. Moreover, the length of the dipole (L) should be increased for conjugate matching with an RFID chip. Therefore, the dipole antenna is downsized so that it can be attached to the drip chamber through a fine meander line structure coupling with a corrugate meander line. A transparent cover is added to enhance the grip force between the designed antenna and the drip chamber and to enable detachment. The dimensions of the completed antenna structure attachable to a drip chamber are 32.59 mm (height) and 13.5 mm (width). The gain reduction due to the decreased antenna length is enhanced. The fabricated antenna shows an average omni-directional read range of 10.65 m on a horizontal plane and has the function of sensing the presence of a drug.

• 자동차안전학회지
• /
• 제7권4호
• /
• pp.16-19
• /
• 2015

FMVSS226 Ejection Mitigation Impact Test is usually performed by real vehicle. But it is necessary to perform the test using by Reinforced B.I.W. with considering vehicle developing timing and roof rail airbag (RRAB) supplier capacity. We sometimes need tendency (quick data) instead of slow accurate data to fix RRAB design as proper timing. Test with Reinforced B.I.W. is helpful saving time and cost. But it should be confirmed how much different between vehicle conditioned test result and Reinforced B.I.W. conditioned test result. There are some points to be improved even in the test with vehicle. Understanding of deviation of Reinforced B.I.W. conditioned test result from vehicle conditioned test result is needed to get benefits with using Reinforced B.I.W. conditioned in the test.

• 기본간호학회지
• /
• 제23권3호
• /
• pp.264-274
• /
• 2016

Purpose: This study was done to compare heat applications by nurses in accordance to belief in evidence-based practice and behavior intention related to research. Methods: A cross-section survey design was used. Participants were 228 nurses from 5 institutions who completed the research questionnaire. Data were collected during July and August 2015. Results: The nurses reported that duration of heat applications was 2.5 minutes to 90 minutes. Frequently used heat application devices, in order of frequency, were rubber bag, gel pack and red clay pack. Most of the nurses (78%) responded that advice from colleagues was the most frequently used basic evidence for heat application. There was a statistically significant difference for the necessity of heat application practice guidelines between the high evidence-based practice belief cluster and the low cluster ($x^2$=15.39, p<.001). Conclusion: There were difficulties in providing consistent nursing interventions because of practical differences and absence of evidence-based guidelines for heat application. The researchers recommend that basic studies with various instruments be conducted and proper practice guidelines developed for heat application.

• 한국안전학회지
• /
• 제27권6호
• /
• pp.20-25
• /
• 2012

Currently, the most important purpose in designing automobile is environment-friendly and safety performance aspect. CFRP(Carbon Fiber Reinforced Plastics) of the advanced composite materials as structure materials for vehicles, has a wide application in lightweight structural materials of air planes, ships and automobiles because of high strength and stiffness. In this study, experimental investigations are carried out for CFRP single and double hat shaped section member in order to study the effect of various stacking condition. They were cured by heating to the appropriate curing temperature($130^{\circ}C$) by means of a heater at the vacuum bag of the autoclave. The stacking conditions were selected to investigate the effect of the interface numbers. The CFRP single and double hat shaped section members which manufactured from unidirectional prepreg sheets were made of 8ply. The static collapse tests performed and the collapse mode and energy absorption capability were analyzed according to interface number.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2011년도 추계학술논문집 1부
• /
• pp.262-265
• /
• 2011

본 연구는 탈진 기류 분사 시스템의 최적화 설계에 관한 기초 연구의 일환으로 전산유체역학(CFD)을 이용하여 일반 블로우 튜브와 단순 벤츄리 조합의 충격 기류(Pulse air jet) 방식의 탈진 장치에 대한 탈진 성능과 벤츄리 입구에 기류 유도용 구조물을 설치한 경우의 탈진 성능을 비교하였다. 각 Case별로 벤츄리 내부로 유입되는 탈진 공기량을 예측한 결과, case 2의 벤츄리 형상 개조시 case 1 보다 벤츄리로 유입되는 탈진 공기량이 약 20% 증폭되는 것으로 나타났다. 또한 필터백 표면에서의 탈진 기류 전달 분포를 예측한 결과, 모든 case가 필터백의 국한된 영역으로 탈진 기류가 집중됨을 알 수 있었다. 또한, case 2의 경우가 case 1보다 오히려 탈진 기류의 전달 수준이 불량함을 알 수 있다. 이는 case 2의 경우 벤츄리 입구에 기류 유도용 구조물을 설치한 것이 탈진 공기량을 증폭시키는데에는 도움이 되나, 오히려 벤츄리 내부로 유입된 탈진 기류의 직진성을 보완하여 필터백 내부에서 탈진 기류의 확장을 방해하기 때문인 것으로 판단된다.

• Design & Manufacturing
• /
• 제15권4호
• /
• pp.57-64
• /
• 2021

In recent materials industry, researches on the technology to manufacture super hydrophobic surface by effectively controlling the wettability of solid surface are expanding. Research on the fabrication of super hydrophobic surface has been studied not only for basic research but also for self-cleaning, anti-icing, anti-friction, flow resistance reduction in construction, textile, communication, military and aviation fields. A super hydrophobic surface is defined as a surface having a water droplet contact angle of 150 ° or more. The contact angle is determined by the surface energy and is influenced not only by the chemical properties of the surface but also by the rough structure. In this paper, maskless lithography using DMD, electro etching, anodizing and hot embossing are used to make the polymer resin PMMA surface super hydrophobic. In the fabrication of microstructure, DMDs are limited by the spacing of microstructure due to the structural limitations of the mirrors. In order to overcome this, maskless lithography using a transfer mechanism was used in this paper. In this paper, a super hydrophobic surface with micro and nano composite structure was fabricated. And the wettability characteristics of the micro pattern surface were analyzed.

• 아태비즈니스연구
• /
• 제13권3호
• /
• pp.389-400
• /
• 2022

Purpose - This study empirically analyzes the effects of food delivery service use frequency and the proportion of single-person households on the generation of MSW (Municipal Solid Waste). Additionally, the study analyzes MSW increase during the COVID-19 period. Design/methodology/approach - The study uses annual information on MSW and related characteristics of 228 Si, Gun, and Gu, which are administrative districts of Korea, from 2015 to 2020. Panel fixed effect model is employed for estimations. Findings - The study finds that food delivery and single-person household have significant effects only on recyclable and standard garbage bag MSW, respectively, not on all produce types of MSW. Additionally, it is estimated that, during the COVID-19 period, the increasing effect of food delivery is intensified while single-person households diminish its increasing effect. Lastly, the study confirms that the marginal effect on the increasing effect of MSW generation by the number of household members. Research implications or Originality - The estimated results are expected to provide useful information for the related policies. In particular, it is necessary to focus more on recyclable MSW concerning the developing delivery culture, and regarding changes in the family structure, focus more on the number of household members than single-person households.

• 감성과학
• /
• 제25권2호
• /
• pp.55-70
• /
• 2022

In the 21^st century, the demand for eco-friendly leather, such as eco-leather and vegan leather, is steadily increasing. This study examines the influence of eco-friendliness on consumers' purchasing intentions and the possibility of eco-friendly changes in the fashion accessory market, which is dominated by leather material and leather substitutes. This study administered a questionnaire survey to 227 males and females between 20 and 60 years of age in Korea. With a 5-point Likert scale, data were collected on evaluation criteria when purchasing shoes and bags and purchasing intention of various leather substitute materials according to the democratic variables. The eco-friendliness attitude was divided into eco-consciousness and green behavior. As the eco-friendly attitude increased, most purchasing standards increased, but the purchasing criteria, such as trends, brands, and prices, did not correlate with the eco-friendly attitude. The eco-consciousness of a consumer had a high correlation with the design evaluation criteria, while the green behavior of the consumer aligned with durability and comfort criteria when purchasing a bag. There was a preference for recycled leather, vegetable leather, synthetic leather, and chemical leather, and the fabric type was ranked as natural fiber, biodegradable fiber, and synthetic fiber. Consumers with both green behavior and eco-consciousness are more likely to purchase biodegradable textiles and vegetable leather for the material of shoes and bags.

• 문화기술의 융합
• /
• 제8권3호
• /
• pp.83-89
• /
• 2022

우리나라의 고유한 전통 한지의 우수성을 전 세계적으로 알리기 위한 목적으로, 예술 분야 등에서 폭넓게 활용되고 있는 전통 한지를 소재로 하여 현대적 감각에 맞는 문화상품으로 제작 제시함으로써 '전통의 현대화'를 도모하고자 하였다. 먼저 한지를 소재로 하여 줌치기법에 의한 줌치한지를 만든다. 만든 줌치한지를 제작하고자 하는 문화상품-노트북 케이스, 핸드폰 케이스, 모자 및 가방-에 따라 일정한 폭으로 자른다. 자른 줌치한지를 용도에 따라 평직, 능직 및 헥사곤으로 엮는다. 엮은 줌치한지를 인조 가죽, 면직물, 데님 등과 매치시켜 문화상품을 제작하여 제시하였다.