• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2009년도 춘계학술발표회
• /
• pp.87-88
• /
• 2009

증발식 담수화 설비에서 증발기로 유입되는 유동의 속도특성은 플래시현상에 중요한 영향을 미친다. 이 연구에서는 벽면제트류가 유입되는 충돌수분류영역과 배플후류영역의 유동 속도에 배플의 높이가 미치는 효과에 관해 PIV계측을 적용해 실험적으로 고찰하였다.

• Water Engineering Research
• /
• 제2권1호
• /
• pp.21-31
• /
• 2001

In this study, laboratory experiments were performed to investigate the flow characteristics of a two-dimensional neutrally buoyant jet in the inlet region of a rectangular laboratory settling tank. Velocity measurements were made with a three-component ADV. Two types of baffles were installed in front of two-dimensional slot; a one-sided and a two-sided baffle. The flow fields from a plane jet impinging on these two types of baffles and a plane jet without a baffle showed quite different characteristics. To concentrate on investigating these flow characteristics, the effects of density currents due to temperature difference or the presence of sediments were not studied. Results of the experiments reveal that the use of the two-sided baffle results in the shortest inlet region. Also shown is that, in addition to the types of baffles, the Froude number turns out to be an important factor in the extent of the inlet region.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1499-1504
• /
• 2004

The effects of absorbing materials on the characteristics of supersonic jet noise were experimentally investigated using a convergent-divergent nozzle with a design Mach number of 2.0. Overall sound pressure levels (OASPL) and noise spectra were obtained at far-field locations. Schlieren optical system was used to visualize the flow-fields of supersonic jets. In order to investigate the effect of absorbing materials, baffle plates of different materials (metal, grass wool and polyurethane foam) were installed at the exit of the nozzle. Experiment was carried out over a wide range of nozzle pressure ratios from 2.0 and 18.0, which corresponds to over- and under-expanded conditions. The results obtained show that the screech tone amplitude and the overall sound pressure level reduce by using the baffle plates of absorbing materials, compared with the metal baffle plate. It is also found that the characteristics of supersonic jet noise are strongly dependent on the size of baffle plate.

• 대한기계학회논문집
• /
• 제13권2호
• /
• pp.287-298
• /
• 1989

본 수치적 해석에서는 H$_{w}$/H$_{g}$의 비가 5.0~16.7의 범위에서 수행된 실험결과를 바탕으로 기존의 ｋ-.epsilon. 난류모델을 사용하여, 고려하고자 하는 변수, 즉 유입유속, 입구 게이트의 높이, 수위, 배플의 유.무등에 따라서 액체의 유동형태가 어떻게 변하는가를 살펴 보고자 한다.다.

• 대한기계학회논문집B
• /
• 제41권9호
• /
• pp.623-629
• /
• 2017

다공배플을 가진 마이크로연소기에 레이놀즈응력 난류모형을 이용하여 난류유동 및 혼합특성에 대한 수치해석 연구를 수행하였다. 다공배플은 연소실 내부에 다수의 3차원 와유동을 발생시키는 기하학적 특징을 가지고 있다. 그러한 형상특징 중에서 배플두께를 변화시킬 경우 와유동구조의 다양한 변화가 얻어졌다. 여러 와유동중에서 연료유동으로부터 생성된 와유동은 혼합도 증가에 결정적 역할을 하였다. 연소실 내부의 3차원 와유동구조는 배플두께 변화에 따른 유동의 발달상태에 의존하였다. 특히, 배플두께가 연료유입구 직경보다 작을수록 배플구멍 제트유동의 속도분포는 포물선형태에서 안장모양의 형태로 변하였다. 연소실내부의 재순환영역크기 및 혼합도는 이러한 제트유동구조에 밀접한 상관관계를 가졌다.

• 대한기계학회논문집
• /
• 제12권6호
• /
• pp.1399-1406
• /
• 1988

본 연구에서는 수로의 폭이 작고(W=74mm) H$_{w}$/H$_{g}$가 5.0~16.7의 범 위인 경우에 레이져 유속계를 이용하여 주어진 유동조건, 예컨대, 유입유속, 입구게이 크(gate)의 높이, 수위, 배플의 유. 무및 높이, 그리고 배플의 위치등에 따라서 액체 속도의 분포가 어떻게 변화하는가를 정성적으로 관찰해 보고자 하는데 주안점을 두었 다. 본 실험 결과는 차후에 계속될 후래시 증발현상에 관한 실험및 해석적 접근에 관한 기초 자료로서 활용하는데에도 그 목적이 있다.다.

• Nuclear Engineering and Technology
• /
• 제56권4호
• /
• pp.1407-1424
• /
• 2024

In Pressurized Water Reactors, most of the failed fuel rods are often observed at the periphery of the fuel assembly, especially near the core baffle. The rod vibration-induced fretting wear is a significant failure mechanism strongly correlated with the coolant and support conditions. This paper presents a coupled vibration model of double-rod to predict the grid-to-rod fretting (GTRF) wear. A motion-dependent fluid force model is used to simulate the coolant cross flow, the gap constraints with asymmetric stiffness between spring and dimple on the vibration form, and the fretting wear are discussed. The results show the effect of the coupled vibration on the deterioration of wear, providing a sound theoretical explanation of some failure phenomena observed in the previous experiment. Exploratively, we analyze the impact of the baffle jet on the GTRF wear, which indicates that the high-velocity cross-flow will significantly affect the vibration forms while sharply changing the wear behavior.

• Journal of Advanced Marine Engineering and Technology
• /
• 제35권4호
• /
• pp.468-474
• /
• 2011

급확대 축소 채널에 설치된 배플 주위의 유동장을 PIV기법으로 계측하고, 배플의 높이 변화에 따른 영향을 평가하였다. 유입유속과 배플 높이는 배플 후방의 재순환흐름에 크기와 유동패턴 및 배플의 상부를 지나는 수력점프 영역의 크기에 상호 영향을 준다. 레이놀즈수 $Re=4{\times}10^3$의 경우 유입유속의 증가에도 유속이 낮아지는 배플의 임계높이는 h/H=1.6전후로 추정된다.

• 한국전산유체공학회지
• /
• 제11권4호
• /
• pp.67-74
• /
• 2006

The characteristics of turbulent flow and mixing in a small can type combustor are investigated by means of Large Eddy Simulation (LES). Attention is paid for a combustor having a baffle plate with oxidant injection and fuel injection holes and study is made for three cases of different baffle plate configurations. From the result, it is confirmed that mixing is promoted by interaction between the jets during their developing process and large vortical flows generated in the vicinity of the combustor wall or fuel jet front. This particular flow feature is effective to accelerate the slow mixing between fuel and oxidant suffering from low Reynolds number condition in such a small combustor. In particular, the vortical flow region ahead of fuel jet plays an important role for rapid mixing. Discussion is made for the time and space averaged turbulent flow and scalar quantities which show peculiar characteristics corresponding to different vortical flow structures for each baffle plate shapes.

• 대한기계학회논문집B
• /
• 제29권10호
• /
• pp.1156-1162
• /
• 2005

In this study, a noble method is proposed to prevent the edge overcoating (EOC) that may develop near the edge of the steel strip in the gas wiping process of continuous hot-dip galvanizing. In our past study (Trans. of the KSME (B), Vol. 27, No. 8, pp. $1105\~1113$), it was found that EOC is caused by the alternating vortices which are generated by the collision of two opposed jets in the region outside the steel strip. When the two opposed jets collide at an angle much less than $180^{o}$, non-alternating stable vortices are established symmetrically outside the steel strip, which lead to nearly uniform pressure on the strip surface. In order to deflect both jets downward by a certain angle, a cylinder with small diameter is installed tangentially to the exit of the lower lip of the two-dimensional jet. In order to find an optimum cylinder diameter, the three dimensional flow field is analysed numerically by using the commercial code, STAR-CD. And the coating thickness is calculated by using an integral analysis method to solve the boundary layer momentum equation. In order to compare the present noble method with the conventional baffle plate method to prevent the EOC, the flow field with a baffle plate is also calculated. The calculation results show that the tangentially installed cylinder at the bottom lip of the jet exit is more effective than the baffle plate to prevent EOC.