• Korean journal of applied entomology
• /
• v.59 no.4
• /
• pp.303-309
• /
• 2020

The populations of Polyphagostarsonemus latus (Acari: Tarsonemidae) have been causing serious economic damages to farmers by directly feeding on leaves of green perilla. However, sampling of P. latus is impossible because there is no suitable sample unit until now. Thus, this study was conducted to suggest suitable sample unit and required sample number for P. latus on green perilla. Individuals of P. latus started to occurr from the leafstalk within a leaf. They required approximated 25 days to spread to all areas within a leaf. New shoots would be a suitable sample unit for P. latus on green perilla because its density on shoots per ㎠ was always higher than the densities on fully grown and moderately grown leaves. Required sample number at D = 0.25 was estimated as a shoot when eggs, nymphs, and adults of P. latus were observed within a leaf. Therefore, Using this small sample unit for sampling of P. latus on green perilla could be economical and efficient.

• Journal of IKEEE
• /
• v.25 no.4
• /
• pp.625-633
• /
• 2021

This paper describes a scalable architecture for flexible hardware implementation of Montgomery modular multiplication. Our scalable modular multiplier architecture, which is based on a one-dimensional array of processing elements (PEs), performs word parallel operation and allows us to adjust computational performance and hardware complexity depending on the number of PEs used, N_PE. Based on the proposed architecture, we designed a scalable Montgomery modular multiplier (sMM) core supporting eight field sizes defined in SEC2. Synthesized with 180-nm CMOS cell library, our sMM core was implemented with 38,317 gate equivalents (GEs) and 139,390 GEs for N_PE=1 and N_PE=8, respectively. When operating with a 100 MHz clock, it was evaluated that 256-bit modular multiplications of 0.57 million times/sec for N_PE=1 and 3.5 million times/sec for N_PE=8 can be computed. Our sMM core has the advantage of enabling an optimized implementation by determining the number of PEs to be used in consideration of computational performance and hardware resources required in application fields, and it can be used as an IP (intellectual property) in scalable hardware design of elliptic curve cryptography (ECC).

• Korean Journal of Remote Sensing
• /
• v.38 no.6_2
• /
• pp.1663-1676
• /
• 2022

Recently, a number of deep-learning based land cover segmentation studies have been introduced. Some studies denoted that the performance of land cover segmentation deteriorated due to insufficient training data. In this study, we verified the improvement of land cover segmentation performance through data augmentation. U-Net was implemented for the segmentation model. And 2020 satellite-derived landcover dataset was utilized for the study data. The pixel accuracies were 0.905 and 0.923 for U-Net trained by original and augmented data respectively. And the mean F1 scores of those models were 0.720 and 0.775 respectively, indicating the better performance of data augmentation. In addition, F1 scores for building, road, paddy field, upland field, forest, and unclassified area class were 0.770, 0.568, 0.433, 0.455, 0.964, and 0.830 for the U-Net trained by original data. It is verified that data augmentation is effective in that the F1 scores of every class were improved to 0.838, 0.660, 0.791, 0.530, 0.969, and 0.860 respectively. Although, we applied data augmentation without considering class balances, we find that data augmentation can mitigate biased segmentation performance caused by data imbalance problems from the comparisons between the performances of two models. It is expected that this study would help to prove the importance and effectiveness of data augmentation in various image processing fields.

• Korean Journal of Remote Sensing
• /
• v.38 no.6_2
• /
• pp.1709-1722
• /
• 2022

The rise in temperature induced by global warming caused in El Nino and La Nina, and abnormally changed the temperature of seawater. Rainfall concentrates in some locations due to abnormal variations in seawater temperature, causing frequent abnormal floods. It is important to rapidly detect flooded regions to recover and prevent human and property damage caused by floods. This is possible with synthetic aperture radar. This study aims to generate a model that directly derives flood-damaged areas by using modified U-NET and TerraSAR-X images based on Multi Kernel to reduce the effect of speckle noise through various characteristic map extraction and using two images before and after flooding as input data. To that purpose, two synthetic aperture radar (SAR) images were preprocessed to generate the model's input data, which was then applied to the modified U-NET structure to train the flood detection deep learning model. Through this method, the flood area could be detected at a high level with an average F1 score value of 0.966. This result is expected to contribute to the rapid recovery of flood-stricken areas and the derivation of flood-prevention measures.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.5
• /
• pp.135-142
• /
• 2022

In this study, lap spliced ultra-high strength reinforced concrete beams were tested and the code criteria for calculating the lap splice length which was affected by the transverse reinforcement and concrete covering performance were reviewed. The main variables for test were set as fiber volume fraction and transverse reinforcing bar arrangement to improve the confining performance of the concrete cover. The change of the confining performance of concrete cover according to the increase in the fiber mixing amount at 1% and 2% volume ratio was examined, and D10 stirrups with a spacing of 100 mm were placed in the lap spliced region. As a result of the test, the specimens confined by the stirrups showed a sudden drop of load bearing capacity with horizontal cracking at the position of tensile longitudinal reinforcement. However, horizontal cracks were not appeared at the location of longitudinal reinforcement for the specimens with steel fiber. And these specimens showed gradual decrease of load bearing capacity after experiencing peak load. In particular, it was found that the strain at the position of the tensile longitudinal reinforcements of the specimens to which the mixing ratio of 2% was applied exceeds the yield strain. As a result of measuring the strain on the concrete surface, it was found that the fiber was more effective in preventing damage to the concrete surface than the stirrups for short lap spliced region.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.32 no.3
• /
• pp.268-278
• /
• 2022

Objectives: This study aimed to establish a control group based on the big data from National Health Insurance Service. We also presented presented the number of incidences for each cancer, and analyzed the cancer incidence rate among Korean workers. Methods: The cohort definition was separated by 'baseline cohort', 'dynamic cohort', and 'fixed- industry cohort' according to the definition. Cancer incidence was calculated based on the Korean Standard Classification of Disease code. Incidence rate was calculated among the group of all workers and public officials. Based on the study subjects and each cohort definition, the number of observations, incidences, and the incidence rate according to sex and age groups was calculated. The incidence rate was estimated based on the incidence per 100,000 person-year, and 95% confidence intervals calculated according to the Poisson distribution. Results: The result shows that the number of cancer cases in the all-worker group decreases after the age of 55, but the incidence rate tends to increase, which is attributed to the retirement of workers over 55 years old. Despite the specific characteristics of the workers, the trend and figures of cancer incidence revealed in this study are similar to those reported in previous studies of the overall South Korean population. When comparing the incidence rates of all workers and the control group of public officials, the incidence rate of public officials is generally observed to be higher in the age group under the age of 55. On the other hand, for workers aged 60 or older, the incidence rates were 1,065.4 per 100,000 person-year for all workers and 1,023.7 per 100,000 person-year for civil servants. Conclusions: This study analyzed through health insurance data including all workers in Korea, and analyzed the incidence of cancer of workers by sex and age. In addition, further in-depth researches are needed to determine the incidence of cancer by industry.

• Journal of Korean Home Economics Education Association
• /
• v.33 no.2
• /
• pp.173-187
• /
• 2021

The purpose of this study was to investigate high school students' needs for home economics elective courses in line with the introduction of the high school credit system and the development of the next home economics curriculum. To this end, 1,689 high school students across the country were analyzed for needs of home economics elective courses (eighteen elective courses and six sub-disciplines of home economics) and differences in the needs of home economics elective courses based on gender, grade levels, and completion of home economics science subject. The research results were as follows. Among the six sub-disciplines, the preference for 'dietary life' was the highest, and in terms of teaching types, experiment and practice class had significantly higher preference in 'dietary life' than other sub-disciplines. Girls showed higher preferences for home economics elective courses than boys, and the third graders showed significantly higher preferences only for the 'dietary life' sub-discipline than the first graders. High school students who are learning or have learned the home economics science subject showed higher preference for home economics elective courses in all the sub-disciplines than those who have not learned it. Based on the results of this study, it is suggested for the national curriculum development that further researches should be actively carried out to develop home economics career elective subjects.

• Journal of Korean Clinical Nursing Research
• /
• v.28 no.3
• /
• pp.223-232
• /
• 2022

Purpose: The purpose of this study was to apply patient-engaged bedside handoffs in comprehensive care units, and to evaluate the effects of bedsides to nurses and patients. Methods: This study employed a cluster randomized cross-over design.Electrical Medical Record (EMR)-based handoffs and patient-engaged bedside handoffs were alternatively applied to 104 patients, who were assigned to a total of 30 clusters (nursing handoff teams) in 4 comprehensive care units at the S medical center in Seoul, and the patients evaluated each type of handoffs. A total of 139 nurses were also participated in the same units and evaluated each type of handoffs. Data were analyzed using t-test, Wilcoxon rank sum test, ANOVA, and Kruskal-Walls test. Results: The patient's satisfaction of the patient-engaged bedside handoffs was higher than that of the EMR-based handoffs (Z=-5.16, p<.001). On the other hand, the nurse's satisfaction of the patient-engaged bedside handoffs was significantly lower than that of the EMR-based handoffs (t=13.21, p<.001). There were no differences in length of the reporting time between two types of handoffs (t=-0.48, p=.634). Conclusion: Patient satisfaction with the patient-engaged bedside handoffs was higher than that of EMR-based handoffs, and nurses' satisfaction with the patient-engaged bedside handoffs was significantly lower than that of EMR-based handoffs. Future studies are needed regarding the impacts of patient-engaged bedside handoffs on the quality of healthcare by identifying the benefits of the handoffs.

• Journal of the Korean Society of Radiology
• /
• v.17 no.1
• /
• pp.25-30
• /
• 2023

As 3D printing technology is used in the medical field, interest in metal materials is increasing. The Department of Radiation Oncology uses a shielding block to shield the patient's normal tissue from unnecessary exposure during electron beam therapy. However, problems such as handling of heavy metal materials such as lead and cadmium, reproducibility according to skill level and uncertainty of arrangement have been reported. In this study, candidate materials that can be used for metal 3D printing are selected, and the physical properties and radiation dose of each material are analyzed to develop a customized shielding block that can be used in electron beam therapy. As candidate materials, aluminum alloy (d = 2.68 g/cm³), titanium alloy (d = 4.42 g/cm³), and cobalt chromium alloy (d = 8.3 g/cm³) were selected. The thickness of the 95% shielding rate point was derived using the Monte Carlo Simulation with the irradiation surface and 6, 9, 12, and 16 energies. As a result of the simulation, among the metal 3D printing materials, cobalt chromium alloy (d = 8.3 g/cm³) was similar to the existing shielding block (d = 9.4 g/cm³) in shielding thickness for each energy. In a follow-on study, it is necessary to evaluate the usefulness in clinical practice using customized shielding blocks made by metal 3D printing and to verify experiments through various radiation treatment plan conditions.

• Korean Journal of Pharmacognosy
• /
• v.53 no.4
• /
• pp.226-233
• /
• 2022

Ephedra herbs are defined as stem of Ephedra sinica , Ephedra intermedia and Ephedra equisetina in the Korean Pharmacopoeia. It is important to use pure herbs to derive the safety and efficacy of herbal medicine. However, the identification of these herbs by conventional taxonomic methods is difficult. Recently, many studies have applied these DNA barcoding for the identification of herbal medicinal species using standard DNA markers. In this study, we report a case study in which the identification of Ephedra species was done by DNA barcoding. For identification of Ephedra species, 17 samples were collected, and a reference DNA barcode library was developed using 6 markers (rbcL, matK, ITS2, ycf1, ycf3, and rpoC2). To develop KASP-SNP markers, we selected 4 markers (ycf1, ycf3, rpl2, and rbcL), which were able to distinguish three Ephedra species. In the result, the specific markers for each of the three Ephedra were clustered into FAM-positive section, whereas non-targeted plants were clustered either HEX-positive or negative section. Therefore, we have developed KASP assay that allow rapid and easy Ephedra species identification using three KASP markers.