• 비파괴검사학회지
• /
• 제30권6호
• /
• pp.548-557
• /
• 2010

An ultrasonic resonance scattering spectroscopy technique is developed and applied for reconstructing elastic constants of a transversely isotropic cylindrical component. Immersion ultrasonic measurements are performed on tube samples made from a boron/aluminum composite material to obtain resonance frequencies and dispersion curves of different guided wave modes propagating in the tube. Theoretical analysis on the acoustic resonance scattering from a transversely isotropic cylindrical tube is also performed, from which complete backscattering and resonance scattering spectra and theoretical dispersion curves are calculated. A sensitive change of the dispersion curves to the elastic properties of the composite tube is observed for both normal and oblique incidences; this is exploited for a systematic evaluation of damage and elastic constants of the composite tube samples. The elastic constants of two boron/aluminum composite tube samples manufactured under different conditions are reconstructed through an optimization procedure in which the residual between the experimental and theoretical phase velocities (dispersion curves) is minimized.

• 대한전자공학회논문지
• /
• 제27권12호
• /
• pp.1889-1893
• /
• 1990

In this paper, ultrasonic microscope system has been constructed with the small aperturre acoustic lens and the angle controller, and the new type of B-scanultransonic imaging has been analyzed. The system with small aperture lens was used to detect flaw existing within the thick specimen and its resolution was in the range of one wavelength at interior plane of sample. The anle controller was used to excited surface acoustic wave or shear wave. In order to obtain B-scan image of the flaw existig at interior of solids, shear wave has been excited and backscattering signals from the flaw have been processed. In experimental results, B-scan ultransonic images have been obtain from the flaws of varable shape and measured flaw size from the images has been in good agreement with practical size in the range of 10% error.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.966-969
• /
• 2003

Thin film capacitors with Al-Polymer-Al sandwich structure were fabricated. The bottom and top aluminium (Al) electrodes were deposited by vacuum evaporation and copper phthalocyanine (CuPc), polyaniline-emeraldine base (Pani-EB) and cobalt phthalocyanine/polyaniline - emeraldine base (CoPc /Pani-EB) blend films (which can be used as buffer hole injection layer in OLEDs) were deposited by spin coating technique. X-ray diffractograms indicated amorphous nature of the polymer films whose thicknesses were measured by capacitance and Rutherford Backscattering Spectrometry (RBS) methods. AC conduction studies revealed that the conduction mechanism responsible in these films is variable range hopping of polarons. From D.C conduction studies, it is observed that, the nature of conduction is ohmic in the lower fields and at higher fields the dominating D.C conduction is of Poole-Frenkel type.

• 센서학회지
• /
• 제20권1호
• /
• pp.8-13
• /
• 2011

We present measurements of the Brillouin frequency shift in an optical fiber using a 1550 nm distributed feedback laser diode(DFB-LD) as a light source. By modulating the probe light with an electro-optic modulator, we confirm the stimulated Brillouin gain spectrum(BGS) and spontaneous BGS using the coherent detection method. We also confirm the applicability of the technique to distributed temperature sensors that measure the change in Brillouin frequency shift due to temperature variations.

• 대한원격탐사학회지
• /
• 제24권5호
• /
• pp.427-436
• /
• 2008

This paper presents radar remote sensing of soil moisture and surface roughness for vegetated surfaces. A precise volume scattering model for a vegetated surface is derived based on the first-order radiative transfer technique. At first, the scattering mechanisms of the scattering model are analyzed for various conditions of the vegetation canopies. Then, the scattering model is simplified step by step for developing an appropriate inversion algorithm. For verifying the scattering model and the inversion algorithm, the polarimetric backscattering coefficients at 1.85 GHz, as well as the ground truth data, of a tall-grass field are measured for various soil moisture conditions. The genetic algorithm is employed in the inversion algorithm for retrieving soil moisture and surface roughness from the radar measurements. It is found that the scattering model agrees quite well with the measurements. It is also found that the retrieved soil moisture and surface roughness parameters agree well with the field-measured ground truth data.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제16권9호
• /
• pp.3124-3137
• /
• 2022

We propose a spectral-efficient coordinated direct and relayed transmission (CDRT) scheme for a relay-assisted downlink system with two users. The proposed scheme is based on backscatter communication (BC) and non-orthogonal multiple access (NOMA) technique. With the proposed BC-NOMA-CDRT scheme, both users can receive one packet within one time slot. In contrast, in existing NOMA-CDRT schemes, the far user is only able to receive one packet in two time slots due to the half-duplex operation of the relay. We investigate the outage of the BC-NOMA-CDRT scheme, and derive the outage probability expressions in closed-form based on Gamma distribution approximation and Gaussian approximation. Numerical results show that the analytical results are accurate and the BC-NOMA-CDRT scheme outperforms the conventional NOMA-CDRT significantly.

• 한국전자파학회논문지
• /
• 제23권4호
• /
• pp.541-550
• /
• 2012

본 논문에서는 3차원 공간의 전자파 수치 해석을 위한 모멘트법(method of moments)의 개선된 해석 기법을 선보인다. 전자파 산란 특성을 해석하기 위해 기본적으로 EFIE(Electric Field Integral Equation)와 RWG(Rao-Wilton-Glisson) 기저 함수를 이용하였으며, 계산 효율을 높이기 위해 기존의 갤러킨(Galerkin) 기법과 중심점 보간(interpolation)법을 혼용하여 해석 시간을 단축시켰다. 이때, 계산 정확도 유지를 위해 임피던스 행렬의 각 원소간 거리를 상대 거리 지수로 정의하여 보간법 적용이 가능한 먼 거리 원소를 구분하였다. 제안된 해석 기법의 성능 검증은 금속구의 Mie-series 해법을 이용한 이론적 RCS(Radar Cross Section)를 비교/분석하였다. 또한, 본 연구 결과를 삼면-/전방향- 전파반사기와 같은 산란체에 적용하여 레이더 후방 산란 특성을 분석하였다.

• 대기
• /
• 제29권1호
• /
• pp.105-112
• /
• 2019

대기 중에 지름이 약 1.68 mm 이상인 물방울이 존재하는 경우, 연직방향으로 주사하는 구름레이더에서 미(Mie) 기법을 사용하여 공기의 연직속도를 구할 수 있다. 이 리뷰논문에서는 강수가 있는 작은 적운 구름에서 구름레이더를 사용하여 공기의 연직속도를 구할 수 있는 방법을 정리하였다. 공기의 연직속도는 첫 번째 미(Mie) 최소치가 이론적으로 가지는 낙하속도와 스펙트럼상에서 첫 번째 미(Mie) 최소치가 실제로 관측된 시선속도와의 차이로 추정할 수 있다. 구름레이더가 항공기에 탑재된 경우에는, 항공기의 운동 및 자세각이, 관측된 도플러속도의 연직성분에 영향을 미치므로 이 항들을 보정하여 공기의 연직속도를 구할 수 있다. 항공용 도플러 레이더의 경우, 미(Mie)기법으로 구한 공기의 연직속도는 구름입자로부터 직접 후방산란 되어 관측된 연직속도 및 항공기 운항시스템으로부터 구한 연직속도와 잘 일치하는 결과를 보여주었다. 구름 레이더로부터 미(Mie) 산란 특징을 이용하여 연직속도를 추정하는 이 기술은 강수 및 비강수 구름시스템에서의 연직속도장 매핑(mapping)에 응용할 수 있다. 또한 여러 고도에서의 항공기 관측을 통하여, 연직속도의 총체적인 구조뿐 만 아니라 폭풍우의 성장, 발달, 소멸 주기(life cycle)를 재구성할 수 있을 것으로 기대된다.

• 지질공학
• /
• 제32권3호
• /
• pp.363-376
• /
• 2022

An area under construction for a living facility collapsed around 12:48 KST on 13 January 2021 in Sa-dong, Ansan-si, Gyeonggi-do. There were no casualties due to the rapid evacuation measure, but part of the temporary retaining facility collapsed, and several cracks occurred in the adjacent road on the south side. This study used the potential of synthetic aperture radar (SAR) satellite for surface property changes that lies in backscattering characteristic to map the collapsed structure. The interferometric SAR technique can make a direct measurement of the decorrelation among different acquisition dates by integrating both amplitude and phase information. The damage proxy map (DPM) technique has been employed using four high-resolution Constellation of Small Satellites for Mediterranean basin Observation (COSMO-SkyMed) data spanning from 2020 to 2021 during ascending observation to analyze the collapse of the construction. DPM relies on the difference of pre- and co-event interferometric coherences to depict anomalous changes that indicate collapsed structure in the study area. The DPMs were displayed in a color scale that indicates an increasingly more significant ground surface change in the area covered by the pixels, depicting the collapsed structure. Therefore, the DPM technique with SAR data can be used for damage assessment with accurate and comprehensive detection after an event. In addition, we classify the amplitude information using support vector machine (SVM) and maximum likelihood classification algorithms. An investigation committee was formed to determine the cause of the collapse of the retaining wall and to suggest technical and institutional measures and alternatives to prevent similar incidents from reoccurring. The report from the committee revealed that the incident was caused by a combination of factors that were not carried out properly.

• 비파괴검사학회지
• /
• 제29권6호
• /
• pp.591-602
• /
• 2009

The Compton backscatter technique has been applied to lap-joint in aircraft structure in order to determine mass loss due to exfoliative corrosion of the aluminum alloy sheet skin. The mass loss of each layer has been estimated from Compton backscatter A-scan including the aluminum sheet, the corrosion layer, and the sealant. A Compton backscattering imaging system has been also developed to obtain a cross-sectional profile of corroded lap-splices of aging aircraft using a specially designed slit-type camera. The camera is to focus on a small scattering volume inside the material from which the backscattered photons are collected by a collimated scintillator detector for interpretation of material characteristics. The cross section of the layered structure is scanned by moving the scattering volume through the thickness direction of the specimen. The theoretical model of the Compton scattering based on Boltzmann transport theory is presented for quantitative characterization of exfoliative corrosion through deconvolution procedure using a nonlinear least-square error minimization method. It produces practical information such as location and width of planar corrosion in layered structures of aircraft, which generally cannot be detected by conventional NDE techniques such as the ultrasonic method.