• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.837-840
• /
• 2008

This paper studies the current regulator of LED Backlighting system for LCD. The proposed regulator and a typical regulator are introduced. To find out the characteristics of two regulators, Prototype samples of LED Backlighting system are made. Both the proposed regulator and a typical regulator are compared with electrical, thermal and optical characteristics each viewpoint.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1487-1490
• /
• 2008

mSilica developed a scalable integrated circuit solution for driving multiple arrays of LEDs to backlight TFT-LCD panels. The drivers incorporate adaptive power control of the DC-DC power supply powering the LEDs to improve the efficiency while synchronizing PWM dimming with video timing signals VSYNC and HSYNC to reduce motion blur.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1786-1788
• /
• 1999

In this paper, we studied Surface Discharge Type Flat Fluorescent Lamp with High Luminance for LCD Backlighting, Liquid Crystal display(LCDs) demand the use of fluorescent lamp as the backlighting source. This lamp is Surface Discharge Type structure with a pair of Sodalime glass, insulator layer, phosphor layer, and Xe gas gap. In spite of its simple structure, the lamp has uniform and stable discharge over entire volume. Till now, we measured the current-voltage(V-I), Firing Voltage, Sustain Voltage for 0.5mm, 1mm electrode gap. In experiment result, long gap cell structure cause high firing voltage. The rising in firing voltage in long gap structure could not be explained by paschen's law because of non-uniform electric field.

• Journal of Electrical Engineering and Technology
• /
• 제10권4호
• /
• pp.1646-1654
• /
• 2015

In this paper, a single-switch ZVZCS quasi-resonant CLL isolated DC-DC converter for driving a low-power (less than 100 W) 32'' LED backlighting liquid crystal display television (LCD TV) is proposed. The proposed converter exhibits both forward and flyback operational characteristics. All semiconductors are activated and deactivated under the soft switching conditions during the switching transition without additional active devices. The switching frequency varies less than about 10 kHz for load variations, leading to minimizing the efficiency reduction under light load. Furthermore, the low di/dt and dv/dt by soft switching enhance the electromagnetic interference (EMI) performance above 1 MHz. A theoretical analysis is described in detail, and a 72-W prototype converter verifies the validity of the analysis.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.536-538
• /
• 2002

Various types of switching inverters such as a full-bridge, a half bridge, a push-pull, and a multi-vibrator, are introduced for multi-lamps backlighting with EEFLs and CCFLs. Synchronizing the phase between voltage and current waves, a high luminance and a high efficiency have been achieved.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.56-59
• /
• 2009

In the nineties the invention of the InGaN blue LED has innovated illumination technology. Currently LCD backlighting and more and more general lighting applications are based on white LEDs comprising of inorganic phosphors and blue emitting InGaN chip. Well established phosphor materials are ortho silicates and garnets like yellow emitting YAG:Ce. In our paper we demonstrate that garnet materials also allow for green light emission for both, general lighting and backlighting LED applications.

• 조명전기설비학회논문지
• /
• 제21권2호
• /
• pp.15-19
• /
• 2007

본 연구에서는 절연층으로 둘러 쌓인 수은이 포함되지 않은 15[inch] 평판형광램프에 대하여 연구하였다. 적당한 주기, 펄스폭을 갖는 구형파가 인가되면 평판형램프는 안정되고 균일한 방전이 전면에 걸쳐 발생한다. 균일하고 안정된 방전 상태에서의 프리즘 시트 없이 최대휘도는 $10,330[cd/m^2]$를 얻었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.177-180
• /
• 1999

In this paper, we studied Surface Discharge Type Flat Fluorescent Lamp(FFL) with High Luminance for LCD Backlighting. This lamp is Surface Discharge Type structure with a pair of Sodalime glass, insulator layer, phosphor layer, and Xe gas gap. There are two influences of Electric field on different dielectric thickness. The Electric field difference at the dielectric layer itself enhances minimum value of firing voltage and luminance uniformity. So, we measured the Electric filed at 0.5mm, 1mm gap length and discharge voltage for difference dielectric layer thickness. In experiment result, the thicker dielectric layer has higher firing voltage and lower current.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2000년도 제1회 학술대회 논문집
• /
• pp.201-202
• /
• 2000

This seminar outlines the technology involved in the backlighting of TFT LCDs. It covers basic terminology, lighting requirements, lamp types and optical techniques. These will be reviewed and compared. Optical factors will be covered and related to space constraints. The spectral requirements, luminance levels, system efficacy, power requirements, lamp temperature, as well as other parameters affecting system performance will be discussed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.363-366
• /
• 2007

A new current control technique called Amplitude Shift Modulation (ASM) for cold cathode fluorescent lamps (CCFL) has been developed. This new technique sets and continuously controls the current of each individual CCFL in an LCD backlight lamp array.