• 한국가스학회지
• /
• 제21권5호
• /
• pp.1-8
• /
• 2017

현재 산업현장의 가스 안전관리는 접촉식은 LDAR(Leak Detection and Repair), 비접촉식은 레이저 메탄검지기와 IR 카메라를 사용하고 있다. LDAR 방식은 전체 관리를 하는데 많은 인력과 소요시간이 들고, 관리자가 측정을 위해 가까이 접근해야 하므로 안전의 위협을 받을 수 있어 비접촉식이 더 효율적이다. 비접촉식에서 IR(infrared)을 이용한 가스 측정 방안에 대한 연구가 주목받고 있다. 산업 가스 중 메탄가스를 활용하여 측정 거리에 따라 가스 분출량을 변화시켜 OGI(optical gas image)를 촬영하였다. 본 논문은 가스의 배경온도차이가 OGI 의 선명도에 미치는 영향을 확인하기 위한 실험이다. OGI를 통해 가스의 구름모형을 정확하고, 선명하게 보기 위하여 배경온도 조절판을 제작하였다. 배경온도 조절판을 통해 배경온도와 대기온도 차이가 ${\Delta}T0^{\circ}C$일 때 보다 ${\Delta}T-6^{\circ}C$ 차이의 낮은 온도 조건으로 OGI 촬영을 한 결과가 육안을 확인하였을 때 더 선명한 차이가 나타났다. 선명도 차이의 객관성을 부여하기 위하여 추가로 MATLAB 의 RGB 분석법으로 확인한 결과, ${\Delta}T$가 $-6^{\circ}C$ 일 경우 RGB 값의 수치가 약 20% 낮게 나왔다. 배경온도가 대기온도보다 $-6^{\circ}C$ 낮을 때 더 선명하게 보이는 것은 총 복사법칙으로 설명이 가능하다. 가스의 배경온도가 대기온도에 비해 낮게 될 때 OGI 렌즈로 들어오는 가스의 복사에너지가 증가되어 가스가 더 선명하게 보이게 된다.

• 대한기계학회논문집B
• /
• 제23권3호
• /
• pp.352-363
• /
• 1999

Target detection by the infrared imager depends on the apparent temperature difference between the target and the background, so it is essential to predict apparent temperature variations for this purpose. In this study, thermal analysis program Including conduction, convection and radiation is developed and applied to a representative geometry adequate for examining the apparent temperature characteristics. The results show that the longwave emissivity in association with the background temperature affects the apparent temperature strongly but does not affect the physical temperature. It is revealed that the background temperature plays a role of tuning the apparent temperature. As the longwave emissivity decreases, the apparent temperature decreases when the target is hotter than the background, whereas it increases in the reversed situation. These findings imply that an effective surface treatment, such as painting of a less emissive material, may provide a less detection probability and contribute to preventing the target from being detected at night.

• 한국군사과학기술학회지
• /
• 제17권1호
• /
• pp.8-14
• /
• 2014

Brightness temperature spectra acquired from FTIR(Fourier Transform Infrared)-SCADS (Standoff Chemical Agent Detection System) could be available for detection and identification of the chemical agents and pollutants from different background. IR spectrum range of 770 to 1350 $cm^{-1}$ is corresponding to "atmospheric window". A 2-dimensional(2D) brightness temperature spectrum was drawn from combining each data point through automatic continuous scanning of FTIR along with altitude and azimuth. At higher altitude, temperature of background was decreased but scattering effect of atmospheric gases was increased. Increase in temperature difference between background and blackbody in SCADS at higher temperature causes to increases in peak intensity of $SF_6$. This approach shows us a possibility that 2D visual information is acquired from scanning data with a single FTIR-SCADS.

• 대한물리치료과학회지
• /
• 제24권2호
• /
• pp.1-8
• /
• 2017

Background: To determine the effect of Aerobic exercise(AE) on body temperature and blood components in smoking male subjects. Methods: 15 subjects were randomly assigned to Smoking group(smoking, n=8) and Non-smoking group(Non-smoking, n=7). To measure body temperature and blood components. For evaluation of body temperature, the Infrared Thermography, IT was used, and blood components was measured using the Complete Blood cell Count(CBC). Results: The results shows that White blood cell (WBC) was significantly (p<0.05) increased in Smoking group. and no significantly difference between groups(p<0.05). Regarding body temperature, was significantly (p<0.05) increased in Smoking group and Non-somking group. and no significantly difference between groups(p<0.05). Conclusion: Aerobic exercise can increase White blood cell and body temperature in smokers.

• 대기
• /
• 제22권2호
• /
• pp.137-147
• /
• 2012

The technique of Brightness Temperature Difference (BTD) between 11 and $12{\mu}m$ separates yellow sand dust from clouds according to the difference in absorptive characteristics between the channels. However, this method causes consistent false alarms in many cases, especially over the desert. In order to reduce these false alarms, we should eliminate the background noise originated from surface. We adopted the Background BTD (BBTD), which stands for surface characteristics on clear sky condition without any dust or cloud. We took an average of brightness temperatures of 11 and $12{\mu}m$ channels during the previous 15 days from a target date and then calculated BTD of averaged ones to obtain decontaminated pixels from dust. After defining the BBTD, we subtracted this index from BTD for the Yellow Sand Index (YSI). In the previous study, this method was already verified using the geostationary satellite, MTSAT. In this study, we applied this to the polar orbiting satellite, MODIS, to detect yellow sand dust over Northeast Asia. Products of yellow sand dust from OMI and MTSAT were used to verify MODIS YSI. The coefficient of determination between MODIS YSI and MTSAT YSI was 0.61, and MODIS YSI and OMI AI was also 0.61. As a result of comparing two products, significantly enhanced signals of dust aerosols were detected by removing the false alarms over the desert. Furthermore, the discontinuity between land and ocean on BTD was removed. This was even effective on the case of fall. This study illustrates that the proposed algorithm can provide the reliable distribution of dust aerosols over the desert even at night.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.149-152
• /
• 2007

The detection of yellow sand dust using satellite has been utilized from various bands from ultraviolet to infrared channels. Among them, Infrared channels have an advantage of detecting aerosols over high reflecting surface as well as during nighttime. Especially, brightness temperature difference between 11 and 12{\mu}m(BTD) was often used to distinguish between water cloud and yellow sand, because Ice and liquid water particles preferentially absorb longer wavelengths while aerosol particles preferentially absorb shorter wavelengths. We have found that the BTD significantly depends on surface temperature, emissivity, and zenith angle and thereby the threshold of BTD. In order to overcome these problems, we have constructed the background brightness temperature threshold of BTD and then subtracted it from BTD. Along with this, we utilized high temporal coverage of geostationary satellite, MTSAT-1R, to verify the reliability of the retrieved signal in conjunction with forecasted wind information. The statistical score test illustrated that this newly developed algorithm showed a promising result for detecting mineral dust by reducing the errors in the current BTD method.

• Journal of Ecology and Environment
• /
• 제46권3호
• /
• pp.161-171
• /
• 2022

Background: Epilobium hirsutum L. is designated as an endangered plant in South Korea located in Asia, due to the destruction of its habitats through the development of wetlands. Therefore, in this study, in order to find a light condition suitable for the growth and ecophysiological responses of Epilobium hirsutum L., those of this plant under treatment with various light qualities in a smart farm were measured. Results: In order to examine the changes in the physiological and growth responses of Epilobium hirsutum L. according to the light qualities, the treatment with light qualities of the smart farm was carried out using the red light: blue light irradiation time ratios of 1:1, 1:1/2, and 1:1/5 and a red light: blue light: white light irradiation time ratio of 1:1:1. As a result, the ecophysiological responses (difference between leaf temperature and atmospheric temperature, transpiration rate, net photosynthetic rate, intercellular CO₂ partial pressure, photosynthetic quantum efficiency) to light qualities appeared differently according to the treatments with light qualities. The increase in the blue light ratio increased the difference between the leaf temperature and the atmospheric temperature and the photosynthetic quantum efficiency and decreased the transpiration rate and the intercellular CO₂ partial pressure. On the other hand, the white light treatment increased the transpiration rate and intercellular CO₂ partial pressure and decreased the temperature difference between the leaf temperature and the ambient temperature and photosynthetic quantum efficiency. Conclusions: The light condition suitable for the propagation by the stolons, which are the propagules of Epilobium hirsutum L., in the smart farm, is red, blue and white mixed light with high net photosynthetic rates and low difference between leaf temperature and atmospheric temperature.

• 한국안전학회지
• /
• 제14권1호
• /
• pp.124-128
• /
• 1999

Product background of cement, sand and coarse aggregate differ from country to country, so that thermal behaviour of concrete make a difference in high temperature. To cope with demand, this paper is a study on compressive strength for W/C 45%, 55% and 65% by using domestic portland cement, Han-river sand, sea sand and crushed-coarse aggregate. As a result, it is shown that it is estimating to the mechanical properties of heated concrete specimens under various W/C ratio.

• 대기
• /
• 제27권4호
• /
• pp.423-433
• /
• 2017

The spatial and temporal variations in radiative forcing (RF) and mean temperature changes of greenhouse gases (GHGs), such as $CO_2$, $CH_4$, and $N_2O$, were analyzed at urban center (Yeon-dong) and background sites (Gosan) on Jeju Island during 2010~2015, based on a modeling approach (i.e., radiative transfer model). Overall, the RFs and mean temperature changes of $CO_2$ at Yeon-dong during most years (except for 2014) were estimated to be higher than those at Gosan. This might be possibly because of its higher concentrations at Yeon-dong due to relatively large energy consumption and small photosynthesis and also the difference in radiation flux due to the different input condition (e.g., local time and geographic coordinates of solar zenith angle) in the model. The annual mean RFs and temperature changes of $CO_2$ were highest in 2015 ($2.41Wm^{-2}$ and 1.76 K) at Yeon-dong and in 2013 ($2.22Wm^{-2}$ and 1.62 K) at Gosan (except for 2010 and 2011). The maximum monthly/seasonal mean RFs and temperature changes of $CO_2$ occurred in spring (Mar. and/or Apr.) or winter (Jan. and/or Feb.) at the two sites during the study period, whereas the minimum RFs and temperature changes in summer (Jun.-Aug.). In the case of $CH_4$ and $N_2O$, their impacts on the RF and mean temperature changes were very small (an order of magnitude lower) compared to $CO_2$. The spatio-temporal differences in these RF values of GHGs might primarily depend on the atmospheric profile (e.g., ozone profile), surface albedo, local time (or solar zenith angle), as well as their mass concentrations.

• 비파괴검사학회지
• /
• 제33권4호
• /
• pp.342-348
• /
• 2013

본 논문에서는 비접촉 비파괴검사에 사용되는 적외선열화상카메라의 응답 및 노이즈 특성을 평가할 수 있는 방법을 제시하고 있으며 차동모드흑체의 적외선 표적과 그 주변의 온도차 ${\Delta}$T를 이용하여 상용 적외선열화상카메라의 신호전달함수 및 온도분해능을 구하고 그 결과를 카메라 사양과 비교함으로써 본 평가 방법의 적합성을 검증하였다. 또한 비균일성 보정의 적용 유무로부터 나타나는 온도분해능의 차이 0.01 K을 통하여 적외선열화상카메라의 성능평가에 있어서 비균일성 보정이 필수적인 과정임을 확인하였다.