• Title/Summary/Keyword: Backbone

Search Result 1,080, Processing Time 0.03 seconds

A Design of a Register Insertion Backbone Ring Network (레이스터 인서션 Backbone 링 네트워크에 관한 연구)

  • 강철신
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.17 no.8
    • /
    • pp.796-804
    • /
    • 1992
  • This paper presents a design of a backbone network which uses a rigister-Insertion ring structure, The introduction of a high speed register in sertton backbone ring enables high performance inter-network 4ommunicatlons In a simple and modular structure at low cost and Its concurrent communications.. Two or more bridge nodes can be used to construct a register Insertion backbone ring network. The high bandwidth of the backbone ring sup ports heavy traffic for Inter-segment Eornrnunicatlons. The bridge node does both local address filtering to block data entering the ring and remote address filtering to block data entering the local LAN segment . Title local address greatly reduces the rate on the backbone ring and the remote address filterlng greatly reduces the traffic rate on each LAN segment. An feature makes the network the network reconflguratlon simpler and transparent to users. A throughput analysis Is used to deterrune the bandwidth of the backbone rlr)g transmission medium.

  • PDF

New methodology of backbone curve for RC perforated shear walls

  • Yang, Jing-Shyang;Cheng, Franklin Y.
    • Structural Engineering and Mechanics
    • /
    • v.14 no.3
    • /
    • pp.365-380
    • /
    • 2002
  • Following a series of experiments on isolated low-rise RC shear walls with openings, a theoretical study on the backbone curve of a perforated shear wall shows that there are some important observations from experimental results that make clear a semi-empirical formula of the backbone curve of a perforated wall. Critical shear zones can be depicted from the configuration of shear walls with openings. Different factors, including the size and location of shear wall openings, the wall's height/width ratio, horizontal and vertical steel bar ratios, and location and amount of diagonal steel bars are involved in the derivation of the backbone curve. Bending and shear effects are also considered in the paper. In addition, a comparison of load and displacement for solid and perforated shear walls is discussed. Generally, the comparison between experimental curves and computed backbone curves is favorable.

Supporting Mobile IP in Ad Hoc Networks with Wireless Backbone (무선 백본 기반 Ad Hoc 네트워크에서의 Mobile IP지원)

  • 신재욱;김응배;김상하
    • Proceedings of the IEEK Conference
    • /
    • 2003.11c
    • /
    • pp.223-226
    • /
    • 2003
  • In this paper, we propose new agent discovery and route discovery schemes to support Mobile IP (MIP) in Ad Hoc networks with wireless backbone. The wireless backbone consisting of stationary wireless routers and Internet gateways (IGs) is a kind of wireless access network of IP-based core network. The proposed scheme utilizes favorable features of wireless backbone such as stable links and no energy constraints. In the agent discovery scheme, backbone-limited periodic Agent Advertisement (AA) and proxy-AA messages are used, which reduce network-wide broadcasting overhead caused by AA and Agent Solicitation messages and decentralize MIP processing overhead in IGs. In order to reduce delay time and control message overhead during route discovery far the destination outside Ad Hoc network, we propose a cache-based scheme which can be easily added to the conventional on-demand routing protocols. The proposed schemes can reduce control overhead during agent discovery and route discovery, and efficiently support MIP in Ad Hoc network with wireless backbone.

  • PDF

Analyzing DNN Model Performance Depending on Backbone Network (백본 네트워크에 따른 사람 속성 검출 모델의 성능 변화 분석)

  • Chun-Su Park
    • Journal of the Semiconductor & Display Technology
    • /
    • v.22 no.2
    • /
    • pp.128-132
    • /
    • 2023
  • Recently, with the development of deep learning technology, research on pedestrian attribute recognition technology using deep neural networks has been actively conducted. Existing pedestrian attribute recognition techniques can be obtained in such a way as global-based, regional-area-based, visual attention-based, sequential prediction-based, and newly designed loss function-based, depending on how pedestrian attributes are detected. It is known that the performance of these pedestrian attribute recognition technologies varies greatly depending on the type of backbone network that constitutes the deep neural networks model. Therefore, in this paper, several backbone networks are applied to the baseline pedestrian attribute recognition model and the performance changes of the model are analyzed. In this paper, the analysis is conducted using Resnet34, Resnet50, Resnet101, Swin-tiny, and Swinv2-tiny, which are representative backbone networks used in the fields of image classification, object detection, etc. Furthermore, this paper analyzes the change in time complexity when inferencing each backbone network using a CPU and a GPU.

  • PDF

Proposal and Evaluation of Ultra High Speed Wireless Cell Backbone Networks (도시형 초고속 무선통신 셀백본망의 제안 및 평가)

  • Shin, Cheon-Woo;Park, Sung-Hyun
    • Proceedings of the Korea Electromagnetic Engineering Society Conference
    • /
    • 2003.11a
    • /
    • pp.243-248
    • /
    • 2003
  • This paper is contents on that construct ultra high speed wireless communication cell backbone net of city using of wireless communication transceiver for millimeter wave band. A new type of 60GHz wave band wireless transceiver using NRD waveguide. This 60GHz transceiver has excellent signal's absorption characteristics of oxygen molecule than the other millimeter wave bands. We constructed service networks to cell interval within about 500m to 3Km laying stress on wireless backbone node using 60GHz transceivers, and did it so that city type wireless communication cell backbone networks of 155.52Mbps ATM(OC-3) may be possible. The possible use of wireless backbone networks technology in a rainy day and a clear day was evaluated at 1Km data link distance. We can measured bit error rate(BER). BER is $10^{-11}$ at 155.52Mbps ATM(OC-3) in a clear day and $10^{-6}$ in a heavy rain more than 35mm per time. Also, we constructed wireless cell backbone networks distance to use several 60GHz transceivers and investigated data transmission rate between main center and local center of long distance. In proposed wireless cell backbone networks, the data throughput was approximately 80Mbit/sec. Therefore, if use transceiver, it is possible that city type ultra high speed wireless communication cell backbone networks construction of 100Mbps, 155.52Mbps, 622Mbps, 1Gbps and 1.2Gbps degrees.

  • PDF

Development of a 4-DOF Continuum Robot Using a Spring Backbone (스프링 구조를 이용한 4자유도 연속체 로봇의 개발)

  • Yoon, Hyun-Soo;Yi, Byung-Ju
    • The Journal of Korea Robotics Society
    • /
    • v.3 no.4
    • /
    • pp.323-330
    • /
    • 2008
  • This work deals with a 4-DOF flexible continuum robot that employs a spring as its backbone. The mechanism consists of two modules and each module has 2 DOF. The special features of the proposed mechanism are the flexibility and the backdrivability of the whole body by using a spring backbone. Thus, even in the case of collision with human body, this device can ensure safety. The design and the kinematics for this continuum mechanism are introduced. The performance of this continuum mechanism was shown through simulation and experiment.

  • PDF

Efficient Backbone Core Tree Generation Algorithm (효과적인 Backbone Core Tree(BCT)생성 알고리즘)

  • 서현곤;김기형
    • Proceedings of the Korean Information Science Society Conference
    • /
    • 2002.04a
    • /
    • pp.214-216
    • /
    • 2002
  • 본 논문에서는 many-to-many IP 멀티캐스팅을 위한 효율적인 Backbone Core Tree(BCT)생성 알고리즘에 대하여 제안한다. 본 논문의 제안기법은 Core Based Tree(CBT)에 기반을 두고 있다. CBT는 공유 트리를 이용하여 멀티캐스트 자료를 전달하기 때문에 Source Based Tree에 비하여 각 라우터가 유지해야 하는 상태 정보의 양에 적고 적용하기 간단하지만, Core 라우터 선택의 어려움과 트래픽이 Core로 집중되는 문제점을 가지고 있다. 이에 대한 보완책으로 Backbone Core Tree기법이 제안되었는데, 본 논문에서는 주어진 네트워크 위상 그래프에서 최소신장 트리를 만들고, 센트로이드를 이용하여 효율적인 BCT를 생성하는 알고리즘을 제안한다.

  • PDF

3DOF Endoscope with Spring Backbone and Wires (스프링 백본과 와이어를 이용한 3자유도 내시경)

  • Choi, Dong-Geol;Yi, Byung-Ju
    • The Journal of Korea Robotics Society
    • /
    • v.3 no.3
    • /
    • pp.203-211
    • /
    • 2008
  • This work proposes structure of spring backbone micro endoscope. For effective surgery in narrow and limited space, many manipulators are developing that different to existed structure. This device can move like elephant nose or snake unlike the existing robots. For this motion, a mechanism that uses spring backbone and wires has been developed. The new type endoscope that has Z axis motion for spring structure, therefore it has 3 degree of freedom, two rotations and one linear motion. And new kinematics for backbone structure is proposed using simple geographic analysis. The Jacobian and stiffness modeling are also derived. Exact actuator sizing is determined using stiffness model. Finally, the proposed kinematics are verified by simulation and experiments.

  • PDF

Backbone NMR Assignments of WW2 domain from human AIP4

  • Seo, Min-Duk
    • Journal of the Korean Magnetic Resonance Society
    • /
    • v.24 no.2
    • /
    • pp.38-42
    • /
    • 2020
  • WW domains are small protein modules consisting of three-stranded antiparallel β-sheet, and involved in the protein-protein interaction for various biological systems. We overexpressed and purified WW2 domain from human AIP4/Itch (a member of Nedd4 family) using a pH/temperature dependent cleavage system. The backbone assignments of WW2 domain were completed, and secondary structure was predicted. Furthermore, backbone flexibility of WW2 domain was determined by 1H-15N heteronuclear NOE and amide hydrogen exchange experiments. The structural information would contribute to the structural determination of WW2 domain as well as the interaction study of WW2 domain with various binding partners.

Fast Detection of Distributed Global Scale Network Attack Symptoms and Patterns in High-speed Backbone Networks

  • Kim, Sun-Ho;Roh, Byeong-Hee
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • v.2 no.3
    • /
    • pp.135-149
    • /
    • 2008
  • Traditional attack detection schemes based on packets or flows have very high computational complexity. And, network based anomaly detection schemes can reduce the complexity, but they have a limitation to figure out the pattern of the distributed global scale network attack. In this paper, we propose an efficient and fast method for detecting distributed global-scale network attack symptoms in high-speed backbone networks. The proposed method is implemented at the aggregate traffic level. So, our proposed scheme has much lower computational complexity, and is implemented in very high-speed backbone networks. In addition, the proposed method can detect attack patterns, such as attacks in which the target is a certain host or the backbone infrastructure itself, via collaboration of edge routers on the backbone network. The effectiveness of the proposed method are demonstrated via simulation.