• Journal of Oral Medicine and Pain
• /
• v.18 no.1
• /
• pp.31-43
• /
• 1993

To evaluate the correlationship between sign/symptoms of craniomandibular disorder(CMD) and possible contributing occlusal factors, the author analyzed craniomandibular index(CMI), clinical dysfunction index(CDI) and occlusal index(Oi) obtained from 88 subjects (32 males, 56 females, mean age 28.7) consisted of 49 CMD patients(15 males, 34 females, mean age 28.7) and 39 non-CMD patients (17 males, 22 females, mean age 24.5). The obtained results were as follows : 1. There was very high significant correlation bebween CMI and CDI in total subjects (r=0.83, p<0.01) 2. There was very low correlation between working-side interference and TMJ noise which was observed as a statistically significant value(p<0.05). And also there ws very low correlation between nonworking side interference and muscle tenderness, CDI, dysfunction index(DI), palpation index(PI) which were observed as statistically significant value (p<0.01) 3. There was very low correlation between as ymmetry of tetruded contact position(RCP)-intercuspal position(ICP) slide and muscle tenderness, TMJ tenderness, TMJ noise, CMI, DI, PI which were observed as statistically significant values(p<0.05) 4. In general there was low correlation between Oi and muscle tenderness, CDI, CMI, DI, PI which were observed as statistically significant values (p,0.05). But Oi had a relatively higher correlation with muscle tenderness, PI than whith CDI, DI.

• Carbon letters
• /
• v.21
• /
• pp.8-15
• /
• 2017

The thermoelectric Seebeck and Peltier effects of a single walled carbon nanotube (SWCNT) quantum dot nanodevice are investigated, taking into consideration a certain value of applied tensile strain and induced ac-field with frequency in the terahertz (THz) range. This device is modeled as a SWCNT quantum dot connected to metallic leads. These two metallic leads operate as a source and a drain. In this three-terminal device, the conducting substance is the gate electrode. Another metallic gate is used to govern the electrostatics and the switching of the carbon nanotube channel. The substances at the carbon nanotube quantum dot/metal contact are controlled by the back gate. Results show that both the Seebeck and Peltier coefficients have random oscillation as a function of gate voltage in the Coulomb blockade regime for all types of SWCNT quantum dots. Also, the values of both the Seebeck and Peltier coefficients are enhanced, mainly due to the induced tensile strain. Results show that the three types of SWCNT quantum dot are good thermoelectric nanodevices for energy harvesting (Seebeck effect) and good coolers for nanoelectronic devices (Peltier effect).

• Proceedings of the KSME Conference
• /
• 2001.06b
• /
• pp.228-234
• /
• 2001

NTMS(Non-contact Tilted-angle Measuring System) is developed by using the principle that the magnetic field of an anisotropic magnet's inner space is uniform and it's possible to measure the strength of the magnetic field using a linear hall effect sensor. In order to implement the caliper system of the geometry PIG(Pipeline Inspection Gauge) which has high accuracy and proper output voltage of the hall sensor without additional driving module or a signal amplifier, it is necessary to consider the size of the magnet, the inner space and back-yoke and the position of pin-hole in the magnet. So the optimal design method of the caliper system is proposed through analysis of NTMS's magnetic field adopting a FEM(Finite Element Method). The experimental results show that the developed caliper system can be used for the geometry pig with good performances.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.9
• /
• pp.36-45
• /
• 1992

The Modified Multi-Quantum Well(MMQWAl) structures have been grown by Mental-Organic chemical Vapor Deposition(MOCVD) method and stripe type MMQW laser diodes have been investigated. In the case of GaAs/AlGaAs superlattice and quantum well growth by MOCVD, the periodicity, interface abruptess, Al compositional uniformity and layer thickness have been confirmed though the shallow angle lapping technique, double crystal x-ray diffractometry (DCXD) and photoluminescence (PL) measurement. stripe-type MMQW laser diodes have been fabricated using the process technology of photolithography, chemical etching, ohmic contact, back side removing and cleaving. As the result of the electrical and opticalmeasurement of these laser diodes, we have achieved the series resistance of $1[\Omega}~2{\Omega}$ by current-voltage measurements, the threshold current of 200-300mA by currnt-light measurements and the lasing wavelength of 8000-8400$\AA$ by lasing spectrum measurements.

• The Research Journal of the Costume Culture
• /
• v.10 no.6
• /
• pp.709-717
• /
• 2002

In the apparel industry, the technology has been advanced rapidly. The use of 3D scanning systems fur the capture and measurement of human body is becoming common place. Three dimensional digital image can be used for design, inspection, reproduction of physical objects. The purpose of this study is to develop a method that drafts men's basic bodice pattern from scanned 3D body surface shape data. In order to pursue this purpose the researchers developed pattern drafting algorithm. The 3D scanner used in this study was Cyberware Whole Body Scanner WB-4. The bodice pattern drafting algorithm from 3D body surface shape data developed in this study is as follows. First, convert geometric 3D body surface data to 3D polygonal mesh data. Second, develop algorithm to lay out 3D polygonal patches onto a plane using Auto Lisp program. The polygon meshes are coplanar, and the individual mesh is continuously in contact with next one The bodice front surface shape data in polygonal patches form was lined up in bust and waist levels. The back bodice was drafted by lining up the polygonal mesh in scapula, chest, and waist levels. in the drafts, gaps between polygons were formed into the darts.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.4 no.1
• /
• pp.1-12
• /
• 2000

This study summarizes the numerical analyses of a Ti alloy deformation under a back extrusion process. Amongst metallic parts in a small propulsion motor case, a Ti-6Al-4V alloy is used extensively. However, the Ti alloy shows a great deal of shear band formation which often leads to a fracture due to a narrow working temperature window. Moreover, the shear band tends to develop over an area where a contact occurs between the hot work piece and the die wall, due to localized cooling. Thus, heating the dies is often required to overcome the deformation localization. Therefore, it becomes necessary to investigate the internal temperature and strain rate distribution during forging process of a Ti alloy. Furthermore, a shear band analysis is peformed using a finite difference scheme and a comparison is made between steel and Ti alloy.

• Journal of the Semiconductor & Display Technology
• /
• v.8 no.1
• /
• pp.1-5
• /
• 2009

Typically, single-wafer wet etching is done by dispensing chemical onto the front and back side of spin wafer. The wafer is fixed by a number of chuck pins, which obstruct the chemical flow and would result in the incomplete removal of the remaining film, which can become a source of contamination in the next process. In this paper, we introduce a novel design of wafer chuck, in which chuck pins are groupped into two and each group of pins fixes the substrate alternatively. Two groups of chuck pins fix the high-speed spin substrate with non contact method using a magnetic material. The actual process has been executed to observe the effectiveness of this new wafer chuck. It was found that the new wafer chuck performed better than the conventional wafer chuck for removing the remaining film from the bevel and edge side of substrate.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2011.05a
• /
• pp.128-129
• /
• 2011

Mo 박막은 전기전도성과 열적 안전성이 우수하여 CIGS 용 후면전극으로 사용되고 있다. 많은 연구자들이 스퍼터링법을 이용하여 Mo 박막을 이중 박막으로 제조하고 있으며, CIGS 용 기판재로 SLG(Soda Lime Glass)와 연성기판재등이 주로 이용되고 있다. 연구에서는 SLG 기판재를 이용하여 스퍼터링법과 증착속도 및 이온화 등이 우수한 아크 이온 플레이팅법으로 Mo 박막을 제조하였으며, 제조된 Mo 박막을 CIGS 증착공정을 통하여 태양전지 효율을 측정하였다. 스퍼터링법과 아크 이온 플레이팅법으로 제조된 CIGS용 Mo 후면전극 위에 CIGS 박막 제조시 최대 효율은 11.43%, 11.14% 을 나타내었으며 Fill factor 는 67%와 57.3% 의 결과을 얻었다. 제조된 CIGS 셀의 단면 구조를 분석하기 위해 SEM 과 EDS 를 이용하였다. 두 공정방법으로 제조된 CIGS 셀의 단면을 관찰하여 Mo 전극위에 CIGS 박막 성장시의 입자크기가 스퍼터링법보다 아크 이온 플레이팅법이 박막성장이 더딘 것을 알 수 있었다. 그리고 아크 이온 플레이팅법을 이용한 SLG 기판재위에 CIGS 용 Mo 후면전극의 제조와 적용 가능성에 대해 알아보았다.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.27 no.4
• /
• pp.9-20
• /
• 2019

A military aircraft generally includes external stores such as fuel tanks or external arming, depending on the purpose of the operation. When a store is dropped from a military aircraft at high subsonic, transonic, or supersonic speeds, the aerodynamic forces and moments acting on the store can be sufficient to send the store back into contact with the aircraft. This can cause damage to the aircraft and endanger the life of the crew. In this study, time accurate computational fluid dynamics (CFD) with dynamic moving grid (moving and deformable mesh, MDM) technique has been used to accurately calculate store trajectories. For the verification of the present numerical approach, a wind tunnel test model for the wing-pylon-finned store configuration has been considered and analyzed. The comparison results for the ejected store trajectories between the present numerical analysis and the wind tunnel test data at the Mach number of 0.95 and 1.2 are presented. It is also importantly shown that the numerical parameter of MDM technique gives significant effect for the calculated store trajectory in the low-supersonic flow such as Mach 1.2.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.3
• /
• pp.970-977
• /
• 2014

In this paper, the artificial neural network is used to predict the junction temperature of the IGBT power module, by measuring the temperature sensitive electrical parameters (TSEP) of the module. An experiment circuit is built to measure saturation voltage drop and collector current under different temperature. In order to solve the nonlinear problem of TSEP approach as a junction temperature evaluation method, a Back Propagation (BP) neural network prediction model is established by using the Matlab. With the advantages of non-contact, high sensitivity, and without package open, the proposed method is also potentially promising for on-line junction temperature measurement. The Matlab simulation results show that BP neural network gives a more accuracy results, compared with the method of polynomial fitting.