• Asian-Australasian Journal of Animal Sciences
• /
• 제27권4호
• /
• pp.503-510
• /
• 2014

The study was conducted to determine the effect of feeding diets containing Andrographis paniculata leaves (APL), whole Andrographis paniculata plant (APWP) and a control without Andrographis paniculata (AP0), on growth performance, carcass characteristics and meat yield of 24 intact Boer bucks. The results obtained indicated that inclusion of Andrographis paniculata significantly improved feed intake, weight gain, feed efficiency and live weight. The ratios of carcass to fat, lean to bone, lean to fat, and composition of meat were also improved. In addition, there were significant differences (p<0.05) between the dietary treatments in dressing percentage and chilling loss. Goats fed on AP0 (control) had significantly higher proportions of fat and bone, as well as thicker back fat than the supplemented animals (APL and APWP). Higher gut fill in animals fed Andrographis paniculata suggested slow rate of digestion, which could have improved utilization and absorption of nutrients by the animals. Goats fed Andrographis paniculata also produced higher meat yield and relatively lower fat contents (p<0.05).

• 환경위생공학
• /
• 제3권2호
• /
• pp.79-90
• /
• 1988

Untill to-day the disposal of municipal refuse in Korea is entirely depending on dumping the refuse into concave land except a few case that bring about the secondary pollution by generating insects, offensive odour and the dust blow which cause adverse effects to dwelling community in the vicinity. It is widely recognized since Korea is ready to be advanced nation must be carried out the proper way of refuse disposal as meet with the environmental standard and ready to accept by general public. Refuse disposal that is practiced by world wide is known as sanitary landfill although it bears some what the expensive construction and operation costs rather than the plain dumping. The following statement is the construction of sanitary landfill in brief. When one takes a look at the Unites States which has huge territory normaly carry out the refuse disposal by anaerobic improved landfill method while the country has limitted land is experimenting various types of landfill which bring about the earier reuse of completed landfill site and minimise the secondary pollution. The author of this article consider out of several landfill methods the semi aerobic landfill will be widely applied in Korea in coming day, the following article will elaborate little more about the semi aerobic method.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.128.2-128.2
• /
• 2011

스테인레스 스틸 유연기판 위에 플라즈마 화학기상 증착법 (plasma enhanced chemical vapor deposition)을 이용하여 nip 구조의 미세결정질 실리콘 박막 태양전지 (microcrystalline silicon thin film solar cell)를 제조하고 i ${\mu}c$-Si:H광 흡수층과 p ${\mu}c$-Si:H 사이에 i a-Si:H 버퍼 층을 삽입하여 i/p 계면특성을 개선하고 이에 따른 태양전지 성능특성 변화를 조사하였다. ${\mu}c$-Si:H 박막으로 이루어진 i/p 계면에서의 구조적, 전기적 결함은 태양전지 내에서 생성된 캐리어의 재결합과 shunt resistance 감소를 초래하여 개방전압 (open circuit voltage) 및 곡선 인자 (fill factor)를 감소시키는 것으로 알려졌다. 제조된 미세결정질 실리콘 박막 태양전지는 SUS/Ag/ZnO:Al/n ${\mu}c$-Si:H/i ${\mu}c$-Si:H/p ${\mu}c$-Si:H 구조로 제작되었으며 i/p 계면 사이의 i a-Si;H 버퍼층 두께를 변화시키고 이에 따른 태양전지의 특성을 조사하였다. 태양전지의 구조적, 전기적 특성 변화는 Scanning Electron Microscope (SEM), UV-visible-nIR spectrometry, Photo IV와 Dark IV를 통하여 조사하였다.

• 디자인학연구
• /
• 제14권4호
• /
• pp.35-45
• /
• 2001

The origin of Minivan styled RV dates all the way back to the year 1959 when Volkswagen introduced the Microbus in Germany. But the new category of "Minivan" was made, and first used by Chrysler. This was when Chrysler revealed a new vehicle in 1982 named "Minivan". Minivan was successful in gathering the public attention with it′s multi-purpose characteristic. Ever since, many models were introduced in this category by various auto-makers around the world, which made the Minivan segment very competitive. Various Minivans were also introduced by the Korean auto-makers and these models have been finding their place rapidly in the market owing to their unique characteristics. But the reason for the growth of the Minivan category in Korea was quite different from that of other nations. Through out this thesis, the possibilities of a Minivan that can full fill the needs of a new life style of a family in the basis of various documentary records will be discussed. Ways of making roads, where bigger sized Minivans are continuously increasing, more efficient will also be considered. The main topic of this thesis will be about Minivan styled RV(Recreational vehicle) in relation to the change of Korean life style.

• 한국재료학회지
• /
• 제13권5호
• /
• pp.313-316
• /
• 2003

The new epitaxial base cell as a high efficiency Si solar cell was fabricated and the effect of buried contact on the cell characteristics was investigated. In our experiments, the cell with buried contact showed the open circuit voltage of 0.62 V, the short circuit current of 40 mA, the fill factor of 0.7, and the efficiency of 10% under the incident light of AM-1 100 ㎽/$\textrm{cm}^2$. The insertion of buried contact in the epitaxial base structure brought the fabricated cell to the efficiency improvement of about 33%. The cell proposed in this paper has the structural superiority in the fabrication of high efficiency solar cell due to the carrier drift transport in the optical absorption region and the formation of back surface field by $p^{－}$ $p^{+}$ epitaxial base, and the reduction of emitter series resistance by n＋ buried contact.

• 한국지반공학회지:지반
• /
• 제1권1호
• /
• pp.21-30
• /
• 1985

응력재분포리론을 응용한 Dubrova의 토압론과 이를 수정한 Chang의 방법을 발전시켜 정적토압과 지진시의 토압을 벽체의 변위형태를 고려하여 산정하는 방법을 제안하였다. 뒤채움은 사질토 두 일반토로 구분하여 별개의 토압산정식을 제시하였다. 토류벽의 변위형태는 다음 4가지를 선택하였다. (1) 벽체의 정점을 중심으로 회전하는 주동변위 (2) 벽체의 정점을 중심으로 회전하는 주동변위 (3) 벽체의 벽체을 중심으로 회전하는 수동변위 (4) 벽체의 벽체을 중심으로 회전하는 수동변위 제안된 토압공식을 다른 토압론에 의한 이론치와 비교 검토하였다. 그 결과 변위의 형태에 따라 상이한 토압분포가 얻어졌으며 이는 현재 관용되고 있는 토압이론보다 더 합리적이라 사려된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1518-1520
• /
• 2001

Bi-layer Mo films were deposited on sodalime glass substrates using DC magnetron sputtering. As the gas pressure and power density, the resistivity varied from $1.5{\times}10^{-5}$ to $4.97{\times}10^{-4}{\Omega}{\cdot}cm$. Furthermore, stress direction yielded compressive-to-tensile transition stress curves. The microstructure of the compressive stress films which had poor adhesion consists of tightly packed columns, but of the tensile-stressed films had less dense structure. Under all gas pressure conditions, Mo films exhibited distinctly increasing optical reflection with decreasing gas pressure. The expansion of (110) peak width with the gas pressure meant the worse crystalline growth. Also, The highest efficiency was 15.2% on 0.2 $cm^2$. The fill factor, open circuit voltage and short circuit current were 63 %, 570 mV and 42.6 mA/$cm^2$ respectively.

• Journal of Welding and Joining
• /
• 제32권3호
• /
• pp.11-18
• /
• 2014

TSV(through silicon via) filling technology is making a hole in Si wafer and electrically connecting technique between front and back of Si die by filling with conductive metal. This technology allows that a three-dimensionally connected Si die can make without a large number of wire-bonding. These TSV technologies require various engineering skills such as forming a via hole, forming a functional thin film, filling a conductive metal, polishing a wafer, chip stacking and TSV reliability analysis. This paper addresses the TSV filling using Cu electrodeposition. The impact of plating conditions with additives and current density on electrodeposition will be considered. There are additives such as accelerator, inhibitor, leveler, etc. suitably controlling the amount of the additive is important. Also, in order to fill conductive material in whole TSV hole, current wave forms such as PR(pulse reverse), PPR(periodic pulse reverse) are used. This study about semiconductor packaging will be able to contribute to the commercialization of 3D TSV technology.

• 마이크로전자및패키징학회지
• /
• 제10권2호
• /
• pp.33-37
• /
• 2003

Si 태양전지의 효율 개선을 위해 textured 표면을 갖는 에피텍셜 베이스 전지(TSEB)를 제작하고 이의 전기광학적 특성을 조사하였다. 제작된 전지는 AM-1 100 mW/$cm^2$ 입사광 아래에서 개방전압이 0.62 V로, 단락전류가 40 mA로, 충실도가 0.7, 전력변환 효율이 16%로 나타났다. 본 연구에서 제안된 전지는 $P^-/P^+$ 에피구조에 의한 광흡수 영역에서 캐리어의 드리프트 이동과 효과적 배면전계의 형성, 그리고 buried contact을 통한 낮은 직렬저항 등으로 인해 고효율 Si 태양전지의 제작에 적합한 구조로 판단된다.

• 한국지반공학회논문집
• /
• 제20권7호
• /
• pp.207-215
• /
• 2004

본 연구는 보강사면에 상계이론를 적용하여 실제 한계상태에 가까운 신뢰성이 높은 해석방법을 개발하는데 목적이 있으며 상계해석의 유한요소공식화를 전개하는데 있어 거시적인 관점으로부터 비등방성이면서 균질한 재료에 대한 수치해석의 기본 개념은 얻을 수 있다. 보강토는 뒷채움한 성토와 보강재 경계면의 상호작용으로 보강토의 강도가 보강재의 재료적 특성에 의존하고 있기 때문에 흙의 역학적 특성과 보강토의 전체 거동은 보강재의 기하학적인 배열과 상대적인 면적에 의해서 조절할 수 있다. 따라서, 상계이론은 보강사면의 한계상태 거동을 효과적으로 산정할 수 있어 국부적으로 발생하는 소성파괴를 예측할 수 있다.