• Geomechanics and Engineering
• /
• v.32 no.6
• /
• pp.601-613
• /
• 2023

Low liquid limit silt, widely distributed in the middle and down reaches of Yellow River, has the disadvantages of poor grading, less clay content and poor colloidal activity. It is very easy to cause vehicle jumping at the bridge-embankment transition section when the low liquid limit silt used as the backfill at the abutment back. In this paper, a series of laboratory tests were carried out to study the physical and mechanical properties of the low liquid limit silt used as back filling. Ground granulated blast furnace slag (GGBFS) was excited by active MgO and hydrated lime to solidify silt as abutment backfill. The optimum ratio of firming agent and the compaction and mechanical properties of reinforced soil were revealed through compaction test and unconfined compressive strength (UCS) test. Scanning electron microscope (SEM) test was used to study the pore characteristics and hydration products of reinforced soil. 6% hydrated lime and alkali activated slag were used to solidify silt and fill the model of subgrade respectively. The pavement settlement regulation and soil internal stress-strain regulation of subgrade with different materials under uniformly distributed load were studied by model experiment. The effect of alkali activated slag curing agent on curing silt was verified. The research results can provide technical support for highway construction in silt area of the Yellow River alluvial plain.

• The Journal of Engineering Geology
• /
• v.19 no.3
• /
• pp.345-350
• /
• 2009

The endpoint of the Yangbuk tunnel constructed at the national road between Gyeongju and Gampo is composed of massive cutting because the road is driven through the sides of mountain. PAP(Prestressed Anchor and PC Pannel) retaining wall as a slope stability method was established over this section. Part of the anchor in PAP wall became broken after six months. We performed inverse analysis through its measurements obtained until that time. An geological investigation to confirm the condition of ground layering and the attraction force test to find as to whether some errors might be present in the anchor were made. According to the back analysis, it was turned out that the value with soil parameter 90% that was applied to the original design was pertinent. In the redesign, the permissible stress in the anchor body was changed from 306 kN to 591 kN and 784 kN and the fixation position was increased from 11.0 m to 23.0 m. Nevertheless, five months have passed since the exchange of the anchor, the measurement results validate that stable state has been maintained. This research is considered a case that the immediate maintenance helps prevent the slope accidents.

• The Journal of Korean Physical Therapy
• /
• v.22 no.3
• /
• pp.61-69
• /
• 2010

Purpose: This study was designed to investigate correlations between physical fitness, antioxidant enzymes (SOD, CAT, GPX), lipid peroxidation levels (MDA), lipid profiles, lactate levels and cardiovascular variables in an exercising group and a control group. Methods: Twelve healthy young males (Exercise group: 6, Controls: 6). All subjects took physical fitness tests and blood samples were collected while subjects were resting. Results: In the exercise group, there were several significant correlations: between back strength and SOD enzyme levels (r=0.82, p=0.04), back strength and MDA (r=0.94, p=0.00), agility and GPX (r=0.81, p=0.04), and balance and GPX (r=0.81, p=0.04). In the control group, there were significant correlations between: dominant grip strength and MDA (r=-0.84, p=0.03), and agility and GPX (r= -0.82, p=0.04). In the exercise group, there were no significant correlations between physical fitness factors, TC, TG, HDL-C and lactate levels. In the control group, there were significant correlations between: back strength and TG (r=0.88, p=0.01), and agility and HDL-C (r= -0.84, p=0.03). In the exercise group, there were significant correlations between: non-dominant grip strength and SBP (r=0.94, p=0.00), dominant grip strength and SBP (r=0.85, p=0.03), and power and SBP (r=0.82, p=0.04). In controls, there were significant correlations between: dominant grip strength and DBP (r=-0.85, p=0.03), muscular endurance and ST level (r=-0.93, p=0.00), and muscular endurance and HR (r=-0.88, p=0.01). Conclusion: That cardiovascular patients and controls who participated in regular exercise maintained their antioxidant capacity suggests that long-term physical activity can counteract the negative dysfunction that characterizes sedentary lifestyle, probably by maintaining plasma antioxidant defenses and thereby preventing oxidative stress.

• Fisheries and Aquatic Sciences
• /
• v.20 no.9
• /
• pp.21.1-21.10
• /
• 2017

The aim of this study was to assess visible implant fluorescent elastomer (VIE) tagging and stress response in marine medaka, Oryzias dancena. The experimental fish were anesthetized individually and marked with red, yellow, or green elastomer at each of the following three body locations: (1) the abdomen, (2) the back, and (3) the caudal vasculature. During 12 months, the accumulated survival rates of fish in the experimental treatments were not different among red, yellow, and green elastomers. The experimental fish retained > 85% of the tags injected in the back, > 70% of the tags injected in the caudal vasculature, and > 60% of the tags injected in the abdomen (P < 0.05). An important observation was that the abdomen site was associated with poor tag retention. For all injected sites, the red and green tags were able to be detected more easily than the yellow tags when observed under both visible and UV lights. Tag readability was lower for the abdomen site than for the other sites (back and caudal vasculature). Thus, VIE tags were easy to apply to marine medaka (< 1 min per fish) and were readily visible when viewed under UV light.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.8
• /
• pp.301-310
• /
• 2016

This study was to conducted to examine the associations between job stress and musculoskeletal symptoms of child care teachers. Questionnaires were administered to 132 child care teachers and the responses were analyzed using the SPSS/WIN 18.0 program. The average total job stress was 2.80. Based on NOISH criteria, musculoskeletal symptoms were prevalent in 46.2% of the participants. The musculoskeletal symptoms by body part appeared mostly on the shoulder (25.8%), followed by the lower back (18.9%), hands/wrist/fingers (17.4%), neck (11.4%), legs/feet (9.1%), and arms/elbows (7.6%). The positive symptom group showed higher levels of total job stress, work overload, and relationship with school parents stress scores than then the symptom free group. Musculoskeletal symptoms were significantly associated with job stress, work overload, and relationship with school parents stress. Overall, the results of this study indicate that it is necessary to develop strategies for reducing job stress to prevent musculoskeletal symptoms.

• Journal of the Korean Geosynthetics Society
• /
• v.11 no.2
• /
• pp.1-9
• /
• 2012

In order to review the utility of Lade's single hardening constitutive model, a series of isotropic compression-expansion tests and consolidated drained triaxial tests including as CTC, TC, RTC, and OSP were performed by Baekma river sand with various of stress path. Parameters required in model were determined using these tests. The accuracy of analysis was reviewed by back analysis of test results used to determine the 11 parameters of soil property through the test of each stress path. Also. for verifying the accuracy of prediction for the stress-strain behavior using failure criterion related 9 parameters with correlational equation and constant and yield criterion related parameters h, ${\alpha}$ and ${\eta}_1$, when stress path is different with each other, it has been obtained in the review result of stress path dependent characteristics of the constitutional model through the analyzing results of CTC, TC, RTC, OSP, and fine silica sand tests.

• The korean journal of orthodontics
• /
• v.26 no.4
• /
• pp.341-348
• /
• 1996

The efficiency of maxillary canine retraction by means of sliding mechanics along an 0.016 continuous labial arch and an 0.009 inch in diameter with a lumen of 0.030 inch NiTi closed coil spring was compared with that using the same NiTi closed coil spring and Molar Anchoring Spring(MAS) which was designed by author. MAS was made of .017" X .025" TMA wire and was given 60 degree tip-back bend on the wire close to the molar tube. This study was designed to investigate molar and canine root control during retraction into an extraction site with continuous arch wire system. Two techniques were tested with a continuous arch model embedded in a photoelastic resin. A photoelastic model was employed to visualize the effects of forces applied to canine and molar by two retraction mechanics. With the aid of polarized light, stresses were viewed as colored fringes. The photoelastic overview of the upper right quadrant showed that stress concentrations were observed in its photoelastic model. The obtained results were as follows. 1. Higher concentration of compression can be seen clearly at the distal curvature of the canine and mesial curvature of the molar and premolar when NiTi closed coil spring was applied only, which means severe anchorage loss of the molar and uncontrolled tipping of the canine. 2. The least level compression was presented at the mesial root area of the molar and premolar, and mesial root area of the canine when NiTi closed coil spring and MAS were used simultaneously. Especially mesial alveolar crest region of the canine was shown moderate level of compression that means MAS can be used as a appliance for anchorage control and prevention of canine extrusion and uncontrolled tipping during canine retraction.

• Journal of Korean Academy of Nursing
• /
• v.46 no.4
• /
• pp.523-533
• /
• 2016

Purpose: This study was done to examine physical, psycho-social, and individual factors influencing musculoskeletal symptoms among Korean military trainees. Methods: Using a correlation study design, military trainees who had completed almost of all the basic combat training (BCT) days were recruited from two military training units selected by convenience sampling. Data from 415 participants were analyzed. Results: Prevalence of musculoskeletal symptoms was 29.6% defined as a participant having pain or discomfort in one or more body parts during training hours for more than seven consecutive days. Back/pelvic (10.8%), knees (10.1%), shoulders (7.7%), feet/toes (5.6%), ankles (4.8%) were prone to musculoskeletal symptoms. Musculoskeletal symptoms appeared to be related to physical exertion during BCT, stress during BCT, social support from fellow trainees, or previous musculoskeletal injuries. In the logistic regression model, physical exertion during BCT (OR=2.27, 95% CI: 1.42~3.65), stress during BCT (OR=1.79, 95% CI: 1.15~2.78), and previous musculoskeletal injuries (OR=1.58, 95% CI: 1.01~2.47) were the significant factors affecting prevalence of musculoskeletal symptoms. Conclusion: Findings indicate that physical exertion and psycho-social stress should be managed to prevent musculoskeletal symptoms in military trainees with more attention being given to trainees having a history of musculoskeletal injuries.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.3
• /
• pp.435-441
• /
• 2015

Relationships among different stress parameters (lairage time and blood level of lactate and cortisol), meat quality parameters (initial and ultimate pH value, temperature, drip loss, sensory and instrumental colour, marbling) and carcass quality parameters (degree of rigor mortis and skin damages, hot carcass weight, carcass fat thickness, meatiness) were determined in pigs (n = 100) using Pearson correlations. After longer lairage, blood lactate (p<0.05) and degree of injuries (p<0.001) increased, meat became darker (p<0.001), while drip loss decreased (p<0.05). Higher lactate was associated with lower initial pH value (p<0.01), higher temperature (p<0.001) and skin blemishes score (p<0.05) and more developed rigor mortis (p<0.05), suggesting that lactate could be a predictor of both meat quality and the level of preslaughter stress. Cortisol affected carcass quality, so higher levels of cortisol were associated with increased hot carcass weight, carcass fat thickness on the back and at the sacrum and marbling, but also with decreased meatiness. The most important meat quality parameters (pH and temperature after 60 minutes) deteriorated when blood lactate concentration was above 12 mmol/L.

• Journal of the Korean Society for Precision Engineering
• /
• v.9 no.1
• /
• pp.106-117
• /
• 1992

In this study, the propagation behaviour and the closure phenomena of physically small surface cracks were investigated by the techinque of the Kikukawa-unloading elastic compliance method using a back face strain gage. The surface cracks initiated and propagated from notched specimens under constant amplitude bending load. The crack shape (aspect ratio) with approximately semi-circular at the early stage was changed to semi-elliptical as the cracks grew larger. The crack depth (a) could be expressed uniquenly by the crack length (c). The dependence of the crack propagation rate on the stress ratio R was strongly related in the lower ${\Delta}K$ range. The deceleration of the surface crack propagation rate was prominent in lower R during the crack length was small. When the propagation rate was rearranged with the effective stress intensity factor range ${\Delta}$K_{eff} the dependence of the crack propagation rate on the stress ratio R was found to be diminshed. These were caused by the crack closure phenomena that was most prominent at the lower propagation rate. The mechanism of crack closure phenomena was dominated by the plasticity-induced mechanism.