• 지질공학
• /
• 제13권4호
• /
• pp.445-456
• /
• 2003

배면그라우팅과 압밀그라우팅 보강기슬은 터널의 안정성 향상을 위해 터널현장에서 활발히 사용되고있다. 그러나 이에 대한 시공 및 관리 기술 연구는 상대적으로 대단히 미흡한 실정이다. 본 연구에서는 심부에 위치한 도수로 터널 시험 구간에 대하여 그라우팅 전후의 각종 현장 시험과 라이닝 계측을 실시하여 압밀그라우팅 및 배면그라우팅 보강이 콘크리트 라이닝의 응력 및 변형 특성에 미치는 영향을 분석하였다. 터널 그라우팅 보강 효과를 연구한 결과, 그라우팅 보강으로 인해 암반의 탄성계수는 최대 5배까지 증가하였으며 전체적으로 그라우팅의 고결효과는 주목할 만 하였다. 또한, 라이닝 배면에 작용하는 그라우팅 압력은 주입압의 약 10%에 불과하였다. 본 연구 결과는 콘크리트 라이닝 설계시 활용될 수 있을 것으로 기대된다.

• 재활간호학회지
• /
• 제4권1호
• /
• pp.7-19
• /
• 2001

The Objectives of this research is to determine the effect of aerobic exercise program on health status and physical fitness in patients after the stem cell transplantation. This research design is one-group pretest-post test design. Sixteen subjects were selected from one university hospital in Seoul for the study, they was carried out aerobic exercise three to five times a week for 12 weeks. The period of data collection was from February to July, 2000. The collected data was analysed by descriptive analysis, paired t-test, content analysis SAS program was used for the statistical analysis. The results are as follows : 1. There was a significant improvement in the Physical functioning, Vitality and Reported change (t=2.39, p=0.03; t=2.35, p=0.03; t=2.58, p=0.02) but no change was observed in the Role physical, General health perception, Bodily pain, Social functioning, Role emotional and Mental health. 2. There was a significant improvement in the physical fitness (higher VO2 max, t=2.43, p=0.02; lower systolic pressure, t=-4.09, p=0.001; lower diastolic pressure, t=-3.43, p=0.002; lower pulse rate, t=-3.43, p=0.004; higher muscle sustaining power, t=2.79, p=0.015; higher muscle power, t=5.18 p=0.000; higher power of beginning, t=5.55, p=0.001; higher the sense of equilibrium, t=3.57, p=0.003; higher Hemoglobin, t=5.92, p=0.000; higher Hematocrit, t=5.38, p=0.000). Therefore, this study will provide a theoretical back ground for patients after stem cell transplantation to understand the importance of physical exercise and maintain physical exercise; and for other researches to refer to the results for exercise protocol of rehabilitation program.

• 패션비즈니스
• /
• 제5권2호
• /
• pp.49-65
• /
• 2001

This thesis aims to reveal the unsatisfactory unfitting factors in the tight collars of adult males' dress shirts for the purpose of improving neck-collar fitness. For this study, nine adult males were chosen as the subjects. When the subjects erected their necks upright, the researcher conducted an experiment, using the direct anthropometrical measuring method and the gypsum method by turns, in order to understand neck shapes by way of right-neck lateral flection, left-neck lateral flection, neck flection, neck extension, right neck rotation, and left neck rotation. And then, the propriety of allowances from body surface alteration was verified by analyses through the measurement of wearing comfortableness and clothing pressure in two sorts of ready-made dress shirts, which had different allowances. The consequences of this study are as follows: 1. In length alteration to movement, a decrease was found in the opposite (and an increase in the identical) directions of right-neck lateral flection, left-neck lateral flection, and neck flection movements. Also, when the subjects shook their heads, an increase was seen by 0.42$\sim$0.63cm in neck girth, 0.31$\sim$1.12cm in 3cm-above-the-neck base girth, and 1.16cm in neck extension of 3cm-above-the-neck base girth. 2. As a result of the drafts of surface measurement, the alteration ratios of dimensions and vertical length dropped in the identical directions of the movement, but grew in the opposite directions. A reverse change was shown in horizontal length. The rough widening gaps for making drafts were 0.7cm in front left and right, and 0.2cm in back left and right of 3cm-above-the-neck base girth. On the whole, the space was about 1.8cm, while there was no significant variation between the upright stationary test and the movement test. 3. There were important differences between the two kinds of ready-made dress shirts (Type A: 1cm allowance in neck girth; Type B: 2cm allowance) in clothing pressure and wearing comfortableness. That is, Type A had higher pressure and more uncomfortable sense of wearing. In other words, as clothing pressure and wearing comfortableness are negatively related to each other, Type A's greater clothing pressure led to worse wearing comfortableness.

• 한국방사선학회논문지
• /
• 제16권7호
• /
• pp.879-887
• /
• 2022

본 연구에서는 체압 측정형 침대의 기계식 순차 상승 방식이 실제로 척추의 부분별 분절운동을 유도하는지 확인하고자 하였다. 이를 위해 측면 X-선 검사를 하여 순차적 압력을 주는 장치가 척추의 각 부분에 기계적 수직 상승을 주어 척추의 계단식 분절을 유도함을 확인하였다. 이후 요통을 인지하고 있는 대상자에게 통증, 보행 능력, 우울 척도를 측정하고 분석하였다. 10일 동안의 시각적 상사 척도(p<0.05), 요통 장애지수(p<0.05)는 침대 사용 후 평균이 감소하는 경향을 보였다. 보행 능력 검사(p<0.05)에서는 침대 사용 횟수가 증가함에 따라 검사에서의 이동 시간이 감소하였으며 이동 거리는 증가하였다. 또한, 침대 사용 후 노인 우울 척도(p<0.05)가 감소함을 나타냈다. 그 결과, 침대가 제공하는 온열과 지압으로 인한 척추의 분절은 통증의 완화와 더불어 보행과 우울감에도 영향을 미치는 것을 확인하였다.

• 패션비즈니스
• /
• 제22권5호
• /
• pp.96-112
• /
• 2018

This study developed the pants pattern, that improved appearance and gesture functions in clothes to resolve inconveniences in case of activities with being adequate in fitness of slim-fit pants for obese adolescents. The slim-fit pants pattern was developed through the fitting test after designing and making the pattern of the experimental clothing A(c/pu; 99/1%) with the primary commercial clothing as basic prototype, through the fitting test and implementation of the experimental clothing, modified and supplemented secondarily, and through the fitting test of the second experimental clothing, modified and supplemented tertiary. In terms of findings, first, as a result of analyzing the commercial slim-fit pants, it is interpreted to have projected an optical illusion, that appears to be slim due to being narrow in width of the front panel when observed from the front of the pants. Second, in the fitting test of the first experimental clothing, the prototype of commercial clothing was understood to have improved butt, crotch, waist and femoral regions. Third, pattern design of the second experimental clothing was allowed to decline abdominal pressure, in case of the sitting position, by making the crotch line in the front panel short and by handling it with a yoke belt, and was processed a difference between waist and hip circumference in the back panel, with a rubber band in the whole waist part. Fourth, in the gesture function test of the third experimental clothing, high evaluation was received in every item excluding the knee region.

• 한국지반공학회논문집
• /
• 제22권8호
• /
• pp.119-127
• /
• 2006

고로 수쇄슬래그는 선철의 제철과정에서 생산되는 부산물로서 자연 해성모래와 유사한 입자형상을 가지고 경량이며 큰 전단강도와 투수성을 나타낸다. 특히, 고로 수쇄슬래그는 시간경과와 더불어 경화하는 잠재수경성을 가진다. 따라서 고로 수쇄슬래그가 안벽이나 옹벽의 뒷채움 재료로 사용 되어졌을 때, 경화에 의한 전단강도의 증가로 토압감소가 기대되며, 결과적으로 항만구조물의 건설비용이 감소하게 된다. 본 연구에서는 모형토조를 이용하여 고로 수쇄슬래그와 Toyoura sand에 대해 토압, 벽 마찰력, 가동벽체 표면에서의 토압분포를 측정하는 모형실험을 실시하였다. 실험에서 상대밀도는 25%, 55% 및 70%로 설정하였으며 벽체는 저점을 중심으로 주동 및 수동토압측으로 회전시켰다. 벽체 상부에서의 최대 수평변위는 ${\pm}2mm$로 설정하였다. 모형실험 결과, 고로 수쇄슬래그에서 얻어진 주동토압이 Toyoura sand보다 작음을 알았다.

• 복식문화연구
• /
• 제19권2호
• /
• pp.334-345
• /
• 2011

A study on compressive garments guarantee the required pressure and form depending on the type of disease and the state of injury can be used in the preventive treatment of cardiovascular disease. This research is to provide a preliminary data to develop medical clothing products, especially knitted compression garments. Starting from analyzing knitted structure of imported pressure goods to apply to test samples, 11 kinds of knitted stretchy fabrics were manufactured under the various knitting conditions, then their tensile, mechanical and hand properties were measured. In comparison size changes by knitting structure, tuck stitch applied structure showed an increase in course direction and decrease in wale direction. Float stitch applied structure indicated the contraction of size in width because of unformed loops and floated yarn on the technical back of fabric. As a result of tensile properties in tuck and float applied structure, tensile strength was increased in the course direction. On the other hand, the more loops overlapped due to the tuck and float stitch, the more decreased their elongation and elastic recovery were. In case of mechanical properties, as the tuck and float stitch were overlapped double or triple the bending and shearing properties were risen. Accordingly, the drape of fabric becomes stiff, and its surface becomes rough and uneven. The measurements of hand properties showed that the value of KOSHI, FUKURAMI NUMERI in tuck and float applied structure are higher than the plain structure. This results from the relationship between the mechanical and hand properties.

• Geomechanics and Engineering
• /
• 제15권5호
• /
• pp.1061-1070
• /
• 2018

The main purpose of retaining wall methods for deep excavation is to keep the construction site safe from the earth pressure acting on the backfill during the construction period. Currently used retaining wall methods include the common strut method, anchor method, slurry wall method, and raker method. However, these methods have drawbacks such as reduced workspace and intrusion into private property, and thus, efforts are being made to improve them. The most advanced retaining wall method is the prestressed wale system, so far, in which a load corresponding to the earth pressure is applied to the wale by using the tension of a prestressed (PS) strand wire. This system affords advantages such as providing sufficient workspace by lengthening the strut interval and minimizing intrusion into private properties adjacent to the site. However, this system cannot control the tension of the PS strand wire, and thus, it cannot actively cope with changes in the earth pressure due to excavation. This study conducts a preliminary numerical analysis of the field applicability of the controllable prestressed wale system (CPWS) which can adjust the tension of the PS strand wire. For the analysis, back analysis was conducted through two-dimensional (2D) and three-dimensional (3D) numerical analyses based on the field measurement data of the typical strut method, and then, the field applicability of CPWS was examined by comparing the lateral deflection of the wall and adjacent ground surface settlements under the same conditions. In addition, the displacement and settlement of the wall were predicted through numerical analysis while the prestress force of CPWS was varied, and the structural stability was analysed through load tests on model specimens.

• 한국포장학회지
• /
• 제20권2호
• /
• pp.35-39
• /
• 2014

최근 커피시장의 고속 성장과 더불어 커피 포장용 가스배출 밸브(Degassing valve)의 수요도 급격히 증가하고 있다. 가스배출 밸브 주요 제조사(Big maker)로 Goglio사(이탈리아), Bosch사(독일) 및 Wipf사(스위스)가 있는데, 이들이 전세계 가스배출 밸브 포장재 소비량의 80%이상을 공급하고 있다. 국내시장 역시 대부분 수입에 의존하고 있어 수입 대체와 국내 포장산업 활성화를 위해 기술적 차별화와 동시에 선진기업 수준의 품질 성능을 갖춘 가스배출 밸브의 개발이 필요하였다. 따라서, 본 연구에서는 링타입 고무막을 적용하여 중앙 개폐형 가스배출 밸브(SP 밸브)를 개발하였으며, 실험을 통해 열림압력 820~1200 Pa, 닫힘압력 10~50 Pa, 가스 유동율 1.2~1.6 L/min로 Goglio 밸브와 대등한 수준의 품질 성능을 확인할 수 있었다. 또한, 식품용 기구 및 용기 포장 공전에 따른 밸브의 식품용기 품질 적합성을 확인하였으며, 향후 커피 포장용 밸브의 국내외 시장 점유율 확대와 함께 국내 발효식품 포장에 적용함으로써 한식 세계화에 기여할 것으로 기대된다.

• 산업융합연구
• /
• 제19권4호
• /
• pp.111-126
• /
• 2021

본 연구는 소방공무원 수험생을 대상으로 12주간 훈련이 체력요인, 심혈관계요인 변화에 미치는 효과를 규명하고자 하였다. 이를 위해 자발적 참여를 동의한 20-30대 남자 40명을 소방공무원 체력검사종목 훈련군(이하 PT group), 소방공무원 체력검사종목과 유산소훈련 병행군(이하 PT+AR group), 소방공무원 체력검사종목과 무산소훈련 병행군(이하 PT+AN group), 소방공무원 체력검사종목과 유무산소복합훈련 병행군(PT+CO group)으로 나누어 실시하였다. 분석항목으로는 체력요인(악력, 배근력, 앉아 윗몸 앞으로 굽히기, 제자리멀리뛰기, 윗몸일으키기, 20m왕복오래달리기), 심혈관계요인(총콜레스테롤, 중성지방, 고밀도지단백 콜레스테롤, 저밀도지단백 콜레스테롤, 글루코스, 허리둘레, 수축기혈압, 이완기혈압) 및 Framingham Heart Risk Score와 체력요인, 심혈관계 요인의 관계를 비교 분석하였으며 다음과 같은 결론을 얻었다. 본 연구에서 실시한 12주간 체력검정을 위한 훈련이 체력과 심혈관계에 효과적임을 확인 할 수 있었다. 따라서, 체력검정을 위한 훈련이 소방공무원 수험생들의 체력향상과 심혈관질환 위험을 감소시키는데 효과가 있는 것으로 판단된다.