• Journal of the Korean Ceramic Society
• /
• v.33 no.10
• /
• pp.1131-1137
• /
• 1996

The dielectric properties and phase stabilities of Pb(Zn0.6Mg0.4)1/3Nb2/3O3 [PZMN]system were investigated into substitution of A-site with Ba, Sr and Ca ions. The A-site substitutions led to the complexity of components of perovskite phase and then DPT coefficient increased. The A-site substitutions of Ba or Sr ion perovskite single phase could be easily formed by columbite process due to increase of perovskite phase stability. The variation of lattice parameters in specimen obeyed Vegard's law and curie temperature and dielectric constant of specimen decreased linearly. But Ca substitution led to perovskite phae instability. The lattice parameter dielectric constant and curie temperature of specimens drasticaly decreased with formation of pyrochlore phase.

• Journal of the Korean Ceramic Society
• /
• v.34 no.5
• /
• pp.500-504
• /
• 1997

Perovskite Pb0.7Ba0.3Zn1/3Nb2/3O3 substituted with 0.3 mole fraction for Pb-site in PbZn1/3Nb2/3O3 relaxor and pyrochlore Pb1.83Ba0.29Zn1.71Nb2/3O6.39 were mixed and dielectric characteristics of this composites were investigated. Percolation limit of perovskite phase, which was determined by microstructural observation in the composite as an isolation of perovskite phase from pyrochlore matrix, was 28.9-47.5 vol%. Ferroelectric phase transition below percolation limit depends on a parameter which affects the propagation of lattice vibration between isolated perovskite phase and pyrochlore matrix. Therefore, it is believed that ferroelectric lattice vibration of isolated perovskite phase could be transfered to pyrochlore matrix when the oxygen octahedra are linked in 3-dimension and highly polarizable Pb2+ ions are contained in both phases.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.981-984
• /
• 2001

The piezoelectric properties of 0.05pb(A $l_{0.5}$N $b_{0.5}$) $O_3$-0.95Pb(Z $r_{0.52}$ $Ti_{0.48}$) $O_3$+0.7wt%N $b_2$ $O_{5}$ +0.5wt%Mn $O_2$ceramics with the additives of BaC $O_3$were investigated. For the additions of BaC $O_3$, the dielectric constant ($\varepsilon$$^{T}$ $_{33}$ ), the piezoelectric constant ( $d_{33}$ ), the electromechanical coupling factor ( $k_{p}$ ), and . the mechanical quality factor ( $Q_{m}$ ) were increased, but dielectric loss (tan$\delta$) was decreased. The highest piezoelectric properties and dielectric properties were observed at the sintered temperature of 120$0^{\circ}C$ and 0.4 wt% of BaC $O_3$, and the properties of $d_{33}$ , $k_{p}$ , and $Q_{m}$ were 339(x10$^{-12}$ C/N), 59% and 1754, respectively.vely.y.y.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2000.04a
• /
• pp.139.2-139.2
• /
• 2000

• Proceedings of the KIEE Conference
• /
• 1994.07b
• /
• pp.1481-1483
• /
• 1994

The dielectric and electrical properties of $Pb(Mg_{1/3}Nb_{2/3})O_3-PbTiO_3-BaTiO_3$ have been investigated. Perovskite crystalline phase of the specimens is confimed by XRD. The curie temperature decrease with increasing $BaTiO_3$ and hysteresis phenomena decrease with increasement of $BaTiO_3$. The strain vs. applied voltage characteristics exhibit nonlinear relationship and the specimen. of 0.9PMN-0.08PT-0.02BT shows the largest strain.

• Proceedings of the KIEE Conference
• /
• 1994.11a
• /
• pp.196-198
• /
• 1994

The dielectric and electrical properties of $Pb(Mg_{1/3}Nb_{2\3})O_3-PbTiO_3-BaTiO_3$ have been investigated. Perovskite crystalline phase of the specimens are confirmed by XRD at $1270^{\circ}C$. The curie temperature is around $40^{\circ}C$ with the amount of $BaTiO_3$ and $PbTiO_3$. Every specimens shows the slim loop hysteresis curves which is electrostrictive characteristic. The strain vs. applied voltage characteristics exhibits nonlinear relationship, and the specimen of 0.85PMN-0.125PT-0.025BT shows the largest strain.

• Journal of the Microelectronics and Packaging Society
• /
• v.8 no.2
• /
• pp.9-13
• /
• 2001

The effects of glass addition on the densification and the microwave properties of $(Ba_{0.5}Pb_{0.5})Nd_2Ti_5O_{14}$ dielectric system were studied. When 2~3 wt% of borosilicate glass were added, the density increased and the better microwave properties were obtained. When a sample was sintered at $950^{\circ}C$ with 3 wt% of glass, the quality factor and the temperature coefficient of the resonant frequency of the specimen were 4500 and +10 $ppm/^{\circ}C$, respectively. The dielectric constant, however, decreased from 90 to 75 with glass addition.

• Journal of the Korean Ceramic Society
• /
• v.25 no.4
• /
• pp.349-356
• /
• 1988

The PTCR characteristics of (Ba0.8Pb0.2)TiO3 ceramics prepared by the molten salt sysnthesis (MSS) method have been investigated as a function of the amount of Nb2O5 dopant and KCl flux. When the weight ratio of KCl to raw material is 0.8, the resistivity at room temperature decreases with increasing amount of Nb dopant up to 0.6 atom%. It can be explained by compensation for electrons due to Nb+5 ion and holes due to K+ ion. The resistivity of (Ba0.8Pb0.2)(Ti0.994Nb0.006)O3 ceramics at room temperature decreases with increasing the ratio of KCl to raw material up to 0.6, and then increases. These results can be explained by the effect of K+ ion.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.11a
• /
• pp.158-162
• /
• 1997

In this paper, the electrical and dielectrical properties were investigated in Pb(Zr,Ti)O$_3$-Pb(Mn,Nb)O$_3$ ceramics which are manufactured with the substitution of Ba in site Pb. In older to increase the del and Kp , Ba was substitued to site Pb from 0 to 0.1 by 0.02 mol%. As the Ba substitution is increased, dielectric constant is increased and electricmachanical coupling factor showed the maximum value at Ba 0.06mol% and the mechanical qualify factor is decreased and the tetragonality and the grain size are decreased as the Ba substitution.

• Journal of the Korean Ceramic Society
• /
• v.35 no.11
• /
• pp.1162-1170
• /
• 1998

Applicability of crystallization kinetics on thermal analysis was investigated for PbO-TiO2-B2O3-BaO glass systems together with theoretical background of kinetics and electron microscopic observations on nu-cleation and crystallization. Kissinger equation can be used on DTA under the assumption that the nucleus density is fixed during DTA runs. Crystallization mechanism affected on the activation energy Ek obtained from powder samples which is used for domination of surface crystallization. Avrami parameter n that was obtained from Ozawa equation represented closely the crystallization mechanisms observed by an electron microscope. The modified Kissinger equation takes into account crystallization mechanism thereby pro-ducing the true activation energy of crystallization.