• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 1999년도 High Temperature Superconductivity Vol.IX
• /
• pp.115-119
• /
• 1999

Ba$_2Cu_3O_{7-{\delta}}$ (YBCO) thin films were deposited by pulsed laser deposition using differently prepared targets: One was a conventionally solid-state sintered (SSS) target and the other was a modified melt-textured grown (MTC) target. Compared with SSS targets, MTG targets showed a well-connected microstructure consisting of much larger grains and the surface was Bess roughened with the cumulative laser incidence. YBCO films deposited from MTC targets showed a denser and smoother surface of the basal film than the case of SSS targets. The investigations of ${\alpha}$-axis outgrowths in the films indicated that the deposition using MTG targets would result in a more homogeneous and stable film growth as compared to the SSS targets. Also, TEM analysis revealed that the film deposited from MTG targets had a less granular microstructure that would reduce weak-link effects in the film.

• 전자공학회논문지D
• /
• 제35D권5호
• /
• pp.33-39
• /
• 1998

The BST (Ba$_{1-x}$ Sr$_{x}$TiO$_{3}$)(50/50) thin film has been grown by RF magnetron reactive sputtering and its characteristics such as crystallization, surface roughness, and electrical properties have been investigated with varying the film thickness. The crystallization and surface roughness of BST thin film are investigated by using XRD and AFM, respectively The BST thin film anealed at 800.deg. C for 2 min has pure perovskite structure and good surface roughness of 16.1.angs.. We estimate that the thickness and dielectric constant of interface layer between BST film and electrode are 3nm and 18.9, respectively, by measuring the capacitance with various film thickness. As the film thickness increases form 80nm to 240nm, the dielectric constant at 10kHz increases from 199 to 265 and the leakage current density at 200kV/cm decreases from 0.682.mu.A/cm$^{2}$ to 0.181 .mu.A/cm$^{2}$. In the case of 240nm-thick BST thin film, the charge storage density and leakage current density at 5V are 50.5fC/.mu.m$^{2}$ and 0.182.mu.A/cm$^{2}$, respectively. The values indicate that the BST thin film is a very useful dielectric material for the DRAM capacitor.or.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2003년도 하계학술대회
• /
• pp.286-288
• /
• 2003

In this paper, in order to obtain a large differential phase shift with a little change in applied voltage, a ferroelectric reflective load circuit has been designed on top of barium strontium titanate $(Ba,Sr)TiO_3$ [BST] thin film. The design of the ferroelectric reflection-type phase shifter is based on a reflection theory of terminating circuit, which has a reflection-type analogue phase shifter with two ports terminated in symmetric phase-controllable reflective networks. To achieve large amounts of phase shift in low bias-voltage range, the effects of change of capacitance and transmission line connected with two coupled ports of a 3-dB $90^{\circ}$ branch-line hybrid coupler have been investigated. A large phase shift with a small capacitance change in the parallel terminating circuit has been demonstrated in the paper.

• 한국전기전자재료학회논문지
• /
• 제19권12호
• /
• pp.1106-1111
• /
• 2006

To improve warpage, delamination and the chemical reaction between 2 different co-fired materials, the bonding behavior with common glass was studied. As shown in the previous paper, the phenomenon of the infiltration is different with the composition of the glass. In particular, in the case of low temperature melting glass, infiltration is experimented in this study. GA-1 glass is infiltrated among $BaTiO_3$ particles below $800^{\circ}C$ and is made by glass/ceramic composite. Until the laminate is fired under $850^{\circ}C$, provskite phase is observed. Although in the case of GA-12 glass, the temperature of the glass infiltration is lower than it of GA-l glass, the perovskite phase already disappears at $800^{\circ}C$. As a result, GA-1 and GA-12 glasses are infiltrated among particles at low temperature, however, the chemical reactivity of the glass/ceramic and sintering temperature should be considered.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1421-1423
• /
• 2001

$Ba(Mg_{1-x}Co_x)TaO_3$[BMCT] ceramics were prepared by the conventional mixed oxide method. The ceramics were sintered at the temperature of 1525 $\sim$ 1625$^{\circ}C$ for 5hr. in air. The crystal structure of BMCT ceramics was investigated by the XRD. The microstructure of the specimens were observed by SEM. The structural properties of BMCT specimens were investigated as a function of composition and sintering temperature. All BMCT ceramics sintered over 1575$^{\circ}C$ were showed a polycrystalline complex perovskite structure without second phases and any unreacted materials. The density of BMCT (90/10) specimen sintered at 1575$^{\circ}C$ was 7.75g/$cm^2$. As the Co contents decreased, the ordering parameter of B-site in BMCT increased. The ordering parameter of BMCT(90/10) specimen sintered at 1575$^{\circ}C$ was 0.98.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.167-167
• /
• 2008

The barium strontium calcium titanate powders were prepared by sol-gel method. Ferroelectric $(Ba_{0.54}Sr_{0.36}Ca_{0.1})TiO_3$(BSCT) thick films were fabricated by the screen-printing method on alumina substrate. And we investigated the structural and dielectric properties of BSCT thick films with the variation of sintering temperature. As a result of thermal analysis, BSCT polycrystalline perovskite phase was formed at around $660^{\circ}C$. The results of X-ray diffraction analysis were showed a cubic perovskite structure without presence of the second phase in all BSCT thick films. The average grain size and the thickness of the specimen sintered at $1450^{\circ}C$ were about 1.6 mm and 45 mm, respectively. The relative dielectric constant increased and the dielectric loss decreased with increasing the sintering temperature, the values of the BSCT thick films sintered at $1450^{\circ}C$ were 5641 and 0.4% at 1kHz, respectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.180-181
• /
• 2008

화학양론적 $BaTiO_3$의 소결은 고온의 에너지를 필요로 하며, 내부전극과 세라믹충의 동시소성과정에서 Ni이 세라믹층으로의 확산이 발생되어 PTC의 물성저하를 초래한다. 본 연구에서는 저온에서 액상을 형성하여 소결온도를 낮추는 것으로 알려진 산화물 및 비산화물계 소결첨가제가 적층 PTC 세라믹스의 미세구조 및 전기적 특성에 미치는 영향에 대하여 고찰하였다. 소결과정에서 분해되어 기체를 형성하는 BN, $Li_2CO_3$, LiF의 경우 기공율을 증가시켜 산소의 이동경로를 형성하였으며, 이는 입계의 재산화를 용이하게 하여 PTC 효과를 보였다.

• 한국환경과학회지
• /
• 제21권9호
• /
• pp.1139-1147
• /
• 2012

To find out the growth conditions for the maximum activity of nitrogenase which catalyzes nitrogen fixation in Rhodobacter sphaeroides, the promoter activities of nifA and nifH were analyzed and the results indicated that expression of both nifA and nifH was increased in response to deprivation of both O2 concentration and nitrogen source. The nifA mutant was constructed by deleting the gene to investigate the effect of NifA, the transcriptional regulator, on the nifH and nifA expression in R. sphaeroides. Analysis of expression of nif genes using the nifA::lacZ and nifH::lacZ fusions in the nifA mutant revealed that NifA acts as a positive activator for nifH and an autoregulator in its own expression. The promoter activities of nifA and nifH in the prrA mutant grown under anaerobic and ${NH_4}^+$-free conditions were derepressed, comparing with those of the wild-type grown under the same conditions, indicating that the prrA product acts as a positive regulator in expression of nifA and nifH.

• 대한전자공학회논문지
• /
• 제26권6호
• /
• pp.97-101
• /
• 1989

변형불변 패턴인식을 실현하기 위하여 크기와 회전변위에 대해 불변인 극-로가리즘 좌표변환을 이용하였고, 좌표 변환을 수행하기 위하여 Lee 방식의 투과함수를 갖는 CGH를 CAD용 포토(UV light)패턴 발생기에 의해 마스크로 제작하였다. 광학적으로 좌표변환된 입력패턴은 본 논문에서 제시한 광상관기에 입력되었으며, 실시간 홀로그래피에 의한 기록매질로서 $BaTiO_3$ 단결정을 정합필터로 사용하였다. 본 논문에서 제시한 광상관기를 사용하여 크기와 입력에 대한 자기상관값의 변화를 실험적으로 제시함으로서 변형불변 패턴인식을 증명하였다.

• 한국수산과학회지
• /
• 제1권2호
• /
• pp.81-86
• /
• 1968

A porgy was divided into eight parts. After drying at low temperature and pulberizing it, the sample was hydrolyzed by $Ba(OH)_2{\cdot}8H_2O\;at\;120^{\circ}C$, under the pressure of $1\;kg/cm^2$ for 8 hours. Tryptophan was determined by means of microbiological assay, using Lactoba-cillus arabinosus 17-5. The result of experiments was as follows: The content of nitrogen of eight parts of the body amounted $12.55\%$ in muscle being the highest of all, $11.49\%$ in heart, $11.31\%$ in eyeball, $11.22\%$ in liver, $11.06\%$ in intestine, $8.75\%$ in head, $7.81\%$ in gill, and $6.02\%$ in fin which was the lowest of the parts tested. The content of tryptophan per 1 gram nitrogen was 11.79mg in liver, which was the highest of all, 10.11mg in heart, 9.76mg in eyeball, 8.77mg in intestine, 6.28mg in muscle, 5.72mg in head, 4.03mg in gill 2.64mg in fin, and in that order.