• Progress in Superconductivity and Cryogenics
• /
• v.25 no.4
• /
• pp.14-18
• /
• 2023

We have investigated the behavior induced by Ga substitution in B-1212 system and observed an anomalous superconductor-like resistivity drop with an onset near 260 K and an offset at 248 K in the nominal (B_0.65Ga_0.35)(Ba_1.25Sr_0.75)(Er_0.5Ca_0.5)Cu₂O_z compound. However, this property degraded with repeated cycling. Systematic studies of the superconducting properties of the (B_1-xGa_x)(Ba_1.25Sr_0.75)(Er_0.5Ca_0.5)Cu₂O_z compounds are reported and discussed in the context of the anomalous resistivity transition.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1279-1282
• /
• 2009

The luminescence properties of a potential blue-emitting $RbBaPO_4:Eu^{2+}$ phosphor substituted with various metal ions have been investigated. The main emission wavelength of the phosphor samples was red-shifted by the substitution with K and Sr ions. The maximum peak intensity was obtained from the sample $Rb_{0.25}K_{0.75}Ba_{0.99}Eu_{0.01}PO_4$ which showed 144% relative intensity versus that of BAM:$Eu^{2+}$ phosphor under 254 nm excitation.

• Electrical & Electronic Materials
• /
• v.3 no.1
• /
• pp.20-28
• /
• 1990

Pb(Zr, Ti)O$_{3}$-Pb(Ni, Nb)O$_{3}$계 세라믹스에 Ba를 치완시켜 Ba치환량의 증가에 따른 유전율, 전기기계결합계수 및 압전 d정수의 변화를 고찰하였다. 또한 Ba치환에 따른 세라믹스 소자의 송신감도 특성을 조사하고 큐리온도 이동에 따른 온도안정성을 고려하여 초음파 송신기용 압전소자에 응용가능함을 보였다.

• Journal of Korean Society for Atmospheric Environment
• /
• v.14 no.1
• /
• pp.25-33
• /
• 1998

We have studied the reduction of NO by propane over perovskite-type oxides prepared by malic acid method. The catalysts were modified to enhance the activity by substitution by substitution of metal into A or B site of perovskite oxides. In addition, the reaction conditions, such as temperature, $O_2$ concentration, space velocity have been studed. In the $LaCoO_3$ type catalyst, the partial substitution of Ba, Sr into A site enhanced the catalytic activity in the reduction of NO. In the $La_{0.6}Sr_{0.4}Co_{1-x}Fe_xO_3(x=0 \sim 1.9)$ catalyst, the partial substitution of Fe into B site enhanced the conversion of NO, but excess amount of Fe decreased the conversion of NO. The surface area and catalytic activity of perovskite catalysts prepared by malic acid method showed higher values than those of solid reaction method. In the $La_{0.6}Sr_{0.4}Co_{1-x}Fe_xO_3$ catalyst, the conversion of NO increased with increasing $O_2$ concentration and contact time. The introduction of water into reactant feed decreased the catalytic activity.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.325-325
• /
• 2007

The perovskites in the $LaAlO_3-BaZrO_3$ system (i.e., $(1-x)LaAlO_3-xBaZrO_3$ were fabricated by a solid state reaction and their dielectric properties were investigated. For the compositions of x=0.1~0.9, the mixture of $LaAlO_3$ with a rhombohedral structure and $BaZrO_3$ with a cubic was observed when the sintering was conducted at $1500^{\circ}C$, indicating that the solubility of constituent elements was very low and a narrow solid solution region might exist. The large difference of ionic radii between $La^{3+}$ ion (0.136nm, C.N.=12) and $Ba^{2+}$ ion (0.161nm) or $Al^{3+}$ ion (0.0535nm, C.N.=6) and $Zr^{4+}$ ion (0.072nm) might hinder the mutual substitution. Within the compositions of x=0~0.7, the dielectric constant of the mixture increased with the amount of $BaZrO_3$, i.e., x value, which was in good agreement with the logarithmic mixing rule (In $_{r,i}={\Sigma}v_iln\;_{r,i}$). The increase in $BaZrO_3$ doping decreased $Q{\times}f$ value significantly due to the low $Q{\times}f$ value of $BaZrO_3$ itself, a poor microstructure of the mixture with an increased grain boundary area per volume, and defects in the cation and oxygen sub-lattices which were respectively caused by the evaporation of barium during the sintering process and the substitution of Ba on La-site or Al on Zr-site.

• Korean Journal of Materials Research
• /
• v.8 no.7
• /
• pp.659-663
• /
• 1998

The effect of Bi-substitution in $BaO.(Nd_{1-x}Bi_x)_2O_3.4TiO_2$ ceramic was studied on the formation of crystal phases, microstructure, and microwave dielectric properties. $BaO.(Nd_{1-x}Bi_x)_2O_3.4TiO_2$, solid solution (0$\leq$x$\leq$0.2) were formed by Bi-substitution into the Nd site of $BaO.(Nd_{1-x}Bi_x)_2O_3.4TiO_2$ ceramics. Average grain size increased with Bi-substitution. Dielectric constant(${\varepsilon}_r$) increased from 84 to U8, and the temperature coefficient of resonant frequency(${\tau}_f$) decreased from 44 ppm/$^{\circ}C$ to -30 ppm/$^{\circ}C$ when Bi contents increased up to x=0.2 in $BaO.(Nd_{1-x}Bi_x)_2O_3.4TiO_2$ solid solutions. $BaO.(Nd_{1-x}Bi_x)_2O_3.4TiO_2$ solid solutions with x=0.04~0.08 showed the most superior microwave dielectric properties, those are ${\varepsilon}_r$= 89-92, Q . f = 5855~6091 GHz, and (${\tau}_f$)= -7.5-7.5 ppm/$^{\circ}C$.

• Journal of the Korean Ceramic Society
• /
• v.33 no.10
• /
• pp.1131-1137
• /
• 1996

The dielectric properties and phase stabilities of Pb(Zn0.6Mg0.4)1/3Nb2/3O3 [PZMN]system were investigated into substitution of A-site with Ba, Sr and Ca ions. The A-site substitutions led to the complexity of components of perovskite phase and then DPT coefficient increased. The A-site substitutions of Ba or Sr ion perovskite single phase could be easily formed by columbite process due to increase of perovskite phase stability. The variation of lattice parameters in specimen obeyed Vegard's law and curie temperature and dielectric constant of specimen decreased linearly. But Ca substitution led to perovskite phae instability. The lattice parameter dielectric constant and curie temperature of specimens drasticaly decreased with formation of pyrochlore phase.

• Journal of the Korean Ceramic Society
• /
• v.28 no.11
• /
• pp.935-941
• /
• 1991

Effects of calcination process and ZrO2 addition on the electrical properties of [(Ba0.82Sr0.08Ca0.1)O]m(Ti1-$\chi$Zr$\chi$)O2 ceramics have been investigated. With the variation of A/B-site ratio m of the dielectric formulations, sintering behavior and the resistivity after sintering in a reducing atmosphere have been affected by the calcination process. When the dielectric formulations of m=1.01 were sintered in a reducing atmosphere, the room-temperature resitivity of 109 {{{{ OMEGA }}.cm was obtained for samples processed with two-step calcination, which was much lower than 1012 {{{{ OMEGA }}.cm of samples calcined once. It was confirmed that high resistivity of Ca-doped BaTiO3 ceramics, after sintering in a reducing atmosphere, is maintained by acceptor-like behavior of CaTi" which is formed by Ca substitution to Ti-site. It was also found out that the critical amount of B-site Ca substitution for reduction inhibition of BaTiO3 is around 0.005 mol. With the increasing amount of ZrO2 addition to dielectric formulations, Curie peak was depressed and Curie temperature was lowered due to the enhanced diffuse phase transition.tion.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1353-1354
• /
• 2006

The dielectric properties of $Ba_{0.5}Sr_{0.5}TiO_3$(BST) and MgO-doped BST ceramics were investigated for tunable microwave applications by sol-gel method. The effects of MgO mixing with BST. It is observed that Mg substitution into BST causes a shift in the cubic-tetragonal BST Phase transition peak to a lower temperature. MgO-substituted BST and MgO-mixed phases exhibit homogeneous and broadened BST phase transition peaks. Mg substitution into BST has a significant effect on the grain sife reduction. Dielectric constant and loss is inhanced with decrease MgO dopant.

• Korean Journal of Materials Research
• /
• v.33 no.11
• /
• pp.465-474
• /
• 2023

The effects of La³⁺ substitution for Sr²⁺-site on the crystal structure and the dielectric properties of (Ba_0.7Sr_0.3-3x/2La_x) (Ti_0.9Zr_0.1)O₃ (BSLTZ) (0.005 ≤ x ≤ 0.02) ceramics were investigated. The structural characteristics of the BSLTZ ceramics were quantitatively evaluated using the Rietveld refinement method from X-ray diffraction (XRD) data. For the specimens sintered at 1,550 ℃ for 6 h, a single phase with a perovskite structure and homogeneous microstructure were observed for the entire range of compositions. With increasing La³⁺ substitution (x), the unit cell volume decreased because the ionic size of La³⁺ (1.36 Å) ions is smaller than that of Sr²⁺ (1.44 Å) ions. With increasing La³⁺ substitution (x), the tetragonal phase fraction increased due to the A-site cation size mismatch effect. Dielectric constant (ε_r) increased with the La³⁺ substitution (x) due to the increase in tetragonality (c/a) and the average B-site bond valence of the ABO₃ perovskite. The BSLTZ ceramics showed a higher dielectric loss due to the smaller grain size than that of (Ba_0.7Sr_0.3)(Ti_0.9Zr_0.1)O₃ ceramics. BSLTZ (x = 0.02) ceramics met the X7R specification proposed by the Electronic Industries Association (EIA).