• Title/Summary/Keyword: B_1$

Search Result 50,570, Processing Time 0.087 seconds

미취학 아동에 있어 신체발달, 손목 골밀도 및 영양섭취와의 상관성

  • 나현주;명금희;최미경;김애정
    • Proceedings of the KSCN Conference
    • /
    • 2003.11a
    • /
    • pp.1051-1052
    • /
    • 2003
  • 미취학 아동기는 생후 1년 동안의 급격한 성장 이후로부터 학령기가 되기 전까지 성장이 완만해지는 시기이다. 이 시기의 아동들은 혼자 먹는 행동을 익히게 되고 식품에 대한 기호가 형성되는 등 식생활에서도 뚜렷한 개인특성을 갖게되며 이 시기에 형성된 식습관은 성인까지 이어지게 된다. 이 시기에 영양부족에 따른 신체발달의 지연이나 영양과잉에 따른 비만과 같은 과다한 신체발달의 문제점이 지적되고 있어 올바른 식습관 형성은 신체발달과 밀접한 관련성이 있는 것으로 보여진다. 우리나라는 취약한 칼슘섭취 부족에 따라 골격건강에 대한 관심이 크게 증가하고 있는데, 모든 질환이 그러하듯이 골격질환도 치료보다는 예방적인 관리가 다양한 측면에서 효율적이다. 따라서 골격건강과 최적의 신체발달을 위한 식사인자는 매우 중요하며, 일생의 성장시기에 따라 서로 다른 인자들이 관여할 것으로 생각된다. 이에 본 연구에서는 성장이 이루어지면서 식품선택의 독립성이 확립되는 미취학 아동에 있어 신체와 골격 발달에 관련성이 있는 영양섭취 요인을 찾아봄으로써 골격과 신체 발달을 위한 올바른 식습관 형성에 필요한 기초자료를 제시하고자 하였다. 이에 46~84개월의 미취학 어린이 총 62명(남자 37명, 여자 25명)을 대상으로 어머니에 의한 설문조사를 실시하고 대상자의 신체계측(InBody, Biospace)과 손목의 골밀도(DEXA, Medilink)를 측정하였다. 설문지는 어린이와 부모의 일반사항, 어린이의 건강상태, 식습관 및 활동조사표와 24시간 회상법에 의한 식사조사표로 구성하였다. 식사섭취조사 결과는 CAN-Pro를 이용하여 영양소 섭취량을 분석하였으며, 모든 연구결과는 SAS program을 이용하여 통계 분석하였다. 연구결과를 요약하면 다음과 같다. 남녀 어린이의 평균 월령은 62.43$\pm$7.26 개월과 62.12$\pm$8.85개월이었다. 출생시 신장과 체중은 남자 어린이가 50.92$\pm$2.14 cm와 3.36$\pm$0.42kg, 여자 어린이는 각각 50.29$\pm$1.36cm와 3.32$\pm$0.39kg이었다. 현재 신장과 체중은 남자 111.65$\pm$5.44 cm와 19.60$\pm$3.52kg, 여자 109.04$\pm$5.04 cm와 18.67$\pm$2.81kg이었으며, 비만지수는 남녀 각각 -2.13$\pm$9.09%와 0.22$\pm$10.49%였다. 손목의 골밀도는 남녀 어린이 각각 0.25$\pm$0.04g/cm, 0.24$\pm$0.03g/$\textrm{cm}^2$이었다. 에너지 섭취량은 남녀 어린이 각각 영양권장량의 66.43$\pm$18.58%와 70.46$\pm$20.31% 수준이었으며, 남녀 어린이 모두 단백질(124.97$\pm$37.55%, 131.24$\pm$45.49%), 비타민B$_{6}$ (152.48$\pm$47.01%, 152.95$\pm$61.77%), 엽산(106.87$\pm$40.44%, 104.52$\pm$50.16%), 비타민 E (121.04$\pm$52.79%, 113.48$\pm$75.78%)를 제외한 영양소 섭취량이 권장량에 미달되는 섭취수준을 보였다. 특히 성장기에 중요한 칼슘도 남녀 어린이 각각 권장량의 62.21$\pm$39.46%와 70.07$\pm$34.52%로 낮게 섭취하고 있었다. 모든 영양소 섭취량은 남녀 어린이간에 유의한 차이가 없었다. 신체계측치와 영양섭취와의 관계에서 체중, 체수분량, 제지방량은 각각 동물성 철 섭취량과 유의한 부의 상관관계를 보였다(p<0.05, p<0.01, p<0.01). 골밀도와 영양섭취와의 관계에서 손목 골밀도는 식물성 칼슘 섭취량과 유의한 정의 상관관계를 보였고(p<0.05), 특히 위쪽 손목 골밀도는 동물성 단백질, 동물성 철 섭취량과 각각 유의한 부의 상관을 보였다(p<0.05, p<0.05). 이상의 연구결과를 종합할 때 성장이 진행되고 있는 미취학 아동에 있어 신체상태와 골밀도는 동물성 단백질, 식물성 칼슘, 동물성 철 섭취량과 상관성이 있는 것으로 나타남으로써 앞으로 이들 영양소의 섭취가 신체와 골격 성장에 어떠한 영향을 미치는가에 대한 보다 세부적인 연구가 이루어져야 할 것으로 생각된다.

  • PDF

A Study on the Health Status of Dental Technicians by Todai Health Index(THI) (THI에 의한 일부 치과기공사의 건강상태에 관한 조사 연구)

  • Kwon, Soon-Suk;Moon, Hee-Jung;Shin, Myung-Suk;Kim, Yoon-Shin
    • Journal of dental hygiene science
    • /
    • v.9 no.2
    • /
    • pp.169-179
    • /
    • 2009
  • This study aims to present a fundamental data base to figure out the mental and the physical conditions that the dental technicians are facing and ultimately to develop a health care program to deal with their health related problems. To this end, we took an analysis on the health status among the subjects of 895 dental technicians currently working at the dental lab around the nation from January 15 to March 31, 2009 by way or Todai Health Index(THI). Of the average scale point in accordance with 12 scale scores of the physical and the mental subjective symptom, the results revealed that the physical appeals (21.10) were higher than the mental appeals (18.49) and the multiple subjective symptom was marked as 38.44 followed by the mental irritability (25.92). In gender differences, the females proved to be higher than the males in both physical appeals and mental appeals while the physical appeals were dominant in both genders. The physical appeals were higher than the mental appeals with regard to the general characteristics. In the case or the group or age twenties as shown in the physical and mental average scale point, the other groups showed 21.55% of the physical appeals among the married whereas the mental appeals showed the highest point as 18.70 in the unmarried group. In job position, the other groups marked the highest, in working condition, below average group marked the highest, in frequency of break time, none group marked the highest. We drew a conclusion form this study that the dental technicians gained the higher points in the item or the multiple subjective symptom, the menial irritability, and the irregular life. More research on th is phenomena should be followed along with the development of various and practical health care programs to promote the health or dental technicians.

  • PDF

A New High-Yielding Malting Barley Cultivar "Oreum" with High Yielding and BaYMV Resistance (호위축병저항성 다수성 맥주보리 "오름")

  • Hyun, Jong-Nae;Kim, Mi-Jung;Kim, Yang-Kil;Lee, Mi-Ja;Choi, Jae-Sung;Kim, Hyun-Tae;Han, Sang-Ik;Ko, Jong-Min;Lim, Sea-Gyu;Park, Jong-Chul;Kim, Jung-Gon;Suh, Sae-Jung;Kim, Dae-Ho;Kang, Sung-Ju;Kim, Sung-Taeg
    • Korean Journal of Breeding Science
    • /
    • v.41 no.3
    • /
    • pp.328-332
    • /
    • 2009
  • A new malting barley variety, "Oreum", was developed from the a cross between 'Kinuyutaka' and 'Samdobori' at the Honam Agricultural Research Institute (HARI) in 2006. An elite line, YMB2077-2B-24-1-2, was selected in 2003 and designated as 'Milyang132'. It showed good agronomic performance in the regional adaptation yield trials (RYT) from 2004 to 2006, and was released with the name of "Oreum" having high yielding and BaYMV resistance. The average heading and maturing dates of "Oreum" were April 18 and May 24, which were 2 days later than 'Jinyang', a leading variety, at RYT. "Oreum" had longer culm length (75 cm), more spikes per $m^2$ (990), and lighter 1,000 grain weight (35.2 g) than those of 'Jinyang' in paddy field conditions. It was showed resistance to BaYMV at the regions of Naju, Jinju and Milyang but moderate resistance at Iksan. However, the response to other environmental stresses of was similar to 'Jinyang' The yield potential of "Oreum" was about 5.43 MT/ha, 4.93 MT/ha in upland and paddy fields which was about 80%, 35% higher than Jinyang in the regional adaptation yield trials (RYT), respectively. It has good malting quality including high grain assortment, germination capacity ratio, water sensitivity and high the malt production and the extract and short filtration speed than those of 'Jinyang'.

Recent research activities on hybrid rocket in Japan

  • Harunori, Nagata
    • Proceedings of the Korean Society of Propulsion Engineers Conference
    • /
    • 2011.04a
    • /
    • pp.1-2
    • /
    • 2011
  • Hybrid rockets have lately attracted attention as a strong candidate of small, low cost, safe and reliable launch vehicles. A significant topic is that the first commercially sponsored space ship, SpaceShipOne vehicle chose a hybrid rocket. The main factors for the choice were safety of operation, system cost, quick turnaround, and thrust termination. In Japan, five universities including Hokkaido University and three private companies organized "Hybrid Rocket Research Group" from 1998 to 2002. Their main purpose was to downsize the cost and scale of rocket experiments. In 2002, UNISEC (University Space Engineering Consortium) and HASTIC (Hokkaido Aerospace Science and Technology Incubation Center) took over the educational and R&D rocket activities respectively and the research group dissolved. In 2008, JAXA/ISAS and eleven universities formed "Hybrid Rocket Research Working Group" as a subcommittee of the Steering Committee for Space Engineering in ISAS. Their goal is to demonstrate technical feasibility of lowcost and high frequency launches of nano/micro satellites into sun-synchronous orbits. Hybrid rockets use a combination of solid and liquid propellants. Usually the fuel is in a solid phase. A serious problem of hybrid rockets is the low regression rate of the solid fuel. In single port hybrids the low regression rate below 1 mm/s causes large L/D exceeding a hundred and small fuel loading ratio falling below 0.3. Multi-port hybrids are a typical solution to solve this problem. However, this solution is not the mainstream in Japan. Another approach is to use high regression rate fuels. For example, a fuel regression rate of 4 mm/s decreases L/D to around 10 and increases the loading ratio to around 0.75. Liquefying fuels such as paraffins are strong candidates for high regression fuels and subject of active research in Japan too. Nakagawa et al. in Tokai University employed EVA (Ethylene Vinyl Acetate) to modify viscosity of paraffin based fuels and investigated the effect of viscosity on regression rates. Wada et al. in Akita University employed LTP (Low melting ThermoPlastic) as another candidate of liquefying fuels and demonstrated high regression rates comparable to paraffin fuels. Hori et al. in JAXA/ISAS employed glycidylazide-poly(ethylene glycol) (GAP-PEG) copolymers as high regression rate fuels and modified the combustion characteristics by changing the PEG mixing ratio. Regression rate improvement by changing internal ballistics is another stream of research. The author proposed a new fuel configuration named "CAMUI" in 1998. CAMUI comes from an abbreviation of "cascaded multistage impinging-jet" meaning the distinctive flow field. A CAMUI type fuel grain consists of several cylindrical fuel blocks with two ports in axial direction. The port alignment shifts 90 degrees with each other to make jets out of ports impinge on the upstream end face of the downstream fuel block, resulting in intense heat transfer to the fuel. Yuasa et al. in Tokyo Metropolitan University employed swirling injection method and improved regression rates more than three times higher. However, regression rate distribution along the axis is not uniform due to the decay of the swirl strength. Aso et al. in Kyushu University employed multi-swirl injection to solve this problem. Combinations of swirling injection and paraffin based fuel have been tried and some results show very high regression rates exceeding ten times of conventional one. High fuel regression rates by new fuel, new internal ballistics, or combination of them require faster fuel-oxidizer mixing to maintain combustion efficiency. Nakagawa et al. succeeded to improve combustion efficiency of a paraffin-based fuel from 77% to 96% by a baffle plate. Another effective approach some researchers are trying is to use an aft-chamber to increase residence time. Better understanding of the new flow fields is necessary to reveal basic mechanisms of regression enhancement. Yuasa et al. visualized the combustion field in a swirling injection type motor. Nakagawa et al. observed boundary layer combustion of wax-based fuels. To understand detailed flow structures in swirling flow type hybrids, Sawada et al. (Tohoku Univ.), Teramoto et al. (Univ. of Tokyo), Shimada et al. (ISAS), and Tsuboi et al. (Kyushu Inst. Tech.) are trying to simulate the flow field numerically. Main challenges are turbulent reaction, stiffness due to low Mach number flow, fuel regression model, and other non-steady phenomena. Oshima et al. in Hokkaido University simulated CAMUI type flow fields and discussed correspondence relation between regression distribution of a burning surface and the vortex structure over the surface.

  • PDF

Methods of Incorporating Design for Production Considerations into Concept Design Investigations (개념설계 단계에서 총 건조비를 최소로 하는 생산지향적 설계 적용 방법)

  • H.S.,Bong
    • Bulletin of the Society of Naval Architects of Korea
    • /
    • v.27 no.3
    • /
    • pp.131-136
    • /
    • 1990
  • 여러해 전부터 선박의 생산실적이나 생산성 관련 자료를 기록하고 보완하는 작업을 꾸준히 개선토록 노력해온 결과중 중요한 것 하나는, 선박의 여러 가지 설계 검토과정에서 충분히 활용할 수 있는 함축성 있고 믿을만한 형태의 생산정보를 제공해줄 수 있게 되었다는 것이라고 말 할 수 있겠다. 이러한 자료들은 생산계획상 각 단계(stage)에서의 작업량, 예상재료비와 인건비의 산출등이 포함될 수 있으며, 선박이나 해상구조물의 전반적인 설계방법론(design methodology)을 개선코자 한다면 ''생산지향적 설계(Design for Production)''의 근간이 되는 선박건조전략(build strategy), 구매정책(purchasing policy)과 생산기술(production technology)에 대한 폭넓은 지식이 한데 어우러져야 한다. 최근에는 CIMS의 일부분에서 보는 바와 같은 경영관리, 설계 및 생산지원 시스템의 도입으로 이와 같은 설계 프로세스의 추진을 가능케하고 있다. 이와 병행하여 설계를 지원하기 위한 전산기술, 특히 대화형 화상처리기술(interactive graphics)의 발달은 설계자가 선박의 형상이나 구조 배치를 여러 가지로 변화시켜 가면서 눈으로 즉시 확인할 수 있도록 설계자의 능력을 배가시키는데 크게 기여하고 있다. 여러 가지의 설계안(alternative design arrangement)을 신속히 만들어내고 이를 즉시 검토 평가할 수 있는 능력을 초기설계 단계에서 가질 수 있다면 이는 분명히 큰 장점일 것이며, 더구나 설계초기 단계에 생산관련인자를 설계에서 고려할 수 있다면 이는 더욱 두드러진 발전일 것이다. 생산공법과 관련생산 비용을 정확히 반영한 각 가지의 설계안을 짧은 시간내에 검토하고 생산소요 비용을 산출하여 비교함으로써, 수주계약단계에서 실제적인 생산공법과 신뢰성있는 생산실적자료를 기준으로 하여 총 건조비(total production cost)를 최소로 하는 최적의 설계를 선택할 수 있도록 해 줄 것이다. 이제 이와 같은 새로운 설계도구(design tool)를 제공해 주므로써 초기설계에 각종 생산관련 정보나 지식 및 실적자료가 반영가능토록 발전되었다. 본 논문은 영국의 뉴카슬대학교(Univ. of Newcastle upon Type)에서 위에 언급한 특징들을 반영하여 새로운 선박구조 설계 방법을 개발한 연구결과를 보여주고 있다. 본 선계연구는 5단계로 구분되는데; (1) 컴퓨터 그라픽스를 이용하고 생산정보 데이타베이스와 연결시켜 구조형상(geometry)을 정의하고 구조부재 칫수(scantling) 계산/결정 (2) 블럭 분할(block division) 및 강재 배치(panel arrangement)의 확정을 위해 생산기술 및 건조방식에 대한 정보 제공 (3) 상기 (1) 및 (2)를 활용하여 아래 각 생산 단계에서의 생산작업 분석(work content assessment) a) 생산 준비 단계(Preparation) b) 가공 조립 단계(Fabrication/Assembly) c) 탑재 단계(Erection) (4) 각각의 설계(안)에 대하여 재료비(material cost), 인건비(labour cost) 및 오버헤드 비용(overhead cost)을 산출키 위한 조선소의 생산시설 및 각종 품셈 정보 (5) 총 건조 비용(total production cost)을 산출하여 각각의 설계안을 비교 검토. 본 설계 방식을 산적화물선(Bulk Carrier) 설계에 적용하여 구조배치(structural geometry), 표준화의 정도(levels of standardisation), 구조생산공법(structural topology) 등의 변화에 따른 설계 결과의 민감도를 분석(sensitivity studies)하였다. 전산장비는 설계자의 대화형 접근을 용이하도록 하기 위해 VAX의 화상 처리장치를 이용하여 각 설계안에 대한 구조형상과 작업분석, 건조비 현황 등을 제시할 수 있도록 하였다. 결론적으로 본 연구는 설계초기 단계에서 상세한 건조비 모델(detailed production cost model)을 대화형 화상 처리방법에 접합시켜 이를 이용하여 여러가지 설계안의 도출과 비교검토를 신속히 처리할 수 있도록 함은 물론, 각종 생산 실적정보를 초기설계에 반영하는 최초의 시도라고 믿으며, 생산지향적(Design for Production) 최적설계분야의 발전에 많은 도움이 되기를 기대해 마지 않는다. 참고로 본 시스템의 설계 적용결과를 부록에 요약 소개하며, 상세한 내용은 참고문헌 [4] 또는 [7]을 참조 요망한다.

  • PDF

Physicochemical Comparison of Two Different Shark Meats Used for Preparation of Dombaeki (돔배기용 상어육의 이화학적 성분 비교)

  • Kim, Eun-Ok;Yu, Myeong-Hwa;Lee, Ki-Teak;Kim, Seon-Bong;Choi, Sang-Won
    • Food Science and Preservation
    • /
    • v.15 no.5
    • /
    • pp.711-718
    • /
    • 2008
  • Dombaeki, a traditional salted shark meat, has been widely used as a customary religious food in the Daegu-Gyeongbuk area of Korea. Two different sharks, Sphyrna zygaena (SZ) and Isurus oxyrinchus (IO) are traditionally used to prepare Dombaeki. Chemical components, lipid classes, fatty acid levels, and sterol compositions of meats prepared from the two sharks were investigated. There were no significant differences in chemical composition between the two dried shark meats. Major amino acids in shark meat were leucine, lysine, arginine, proline, isoleucine, valine, phenylalanine, glutamic acid, and asparagine, which together accounted for about 40% of total amino acids. Levels of amino acids in IO meat were higher than in SZ meat. Major fatty acids in the two shark meats were palmitic ($C_{16:0}$), stearic ($C_{18:0}$), oleic ($C_{18:1}$), arachidonic ($C_{20:4}$), and docosahexanoic (DHA, $C_{22:6}$) acids, which accounted for about 80% of total fatty acids. Notably, IO meat showed higher amounts of DHA (31.8%) and eicosapentanoic acid (EPA, 1.8%) than did SZ meat. The two shark meats showed similar dry weight levels of total lipids, with triacylglycerols, free fatty acids, sterols, and phospholipidscomprising on average 5.0, 2.0, 13.0 and 63.0% of total lipids, respectively. The dominant classes of phospholipids were mainly phosphatidylcholine (PC) and phosphatidylethanolamine (PE). PC content in the two shark meats was higher than that of PE, although the differencewas not great. The major fatty acids in phospholipids were myristic, palmitoleic, stearic, and docosanoic acids. Total volatile basic nitrogen content and the pH of SZ meat were lower than those of IO meat, whereas the Hunter's 'a' and 'b' values of SZ meat were higher than those of IO meat. These results suggest that shark meat may be useful as a functional food to prevent several degenerative diseases.

Quality Characteristic of the Korean Wheat meju according to Milling Degree of Wheat and Fermenting Strains (밀의 도정 및 발효 균주에 따른 우리밀 메주의 품질특성)

  • Lee, Gyeong-Ran;Ko, Yu-Jin;Kim, Eun-Jung;Seol, Hui-Gyeong;Kim, Eun-Ja;Kim, Il-Hun;Shim, Ki-Hwan;Kim, Young-Gi;Ryu, Chung-Ho
    • Food Science and Preservation
    • /
    • v.19 no.6
    • /
    • pp.858-865
    • /
    • 2012
  • In this research, the soaking and steaming conditions of Korean wheat meju according to the degree of milling were investigated, and the quality characteristic was analyzed, for the manufacture of the standardized Korean wheat meju. As a result of the changes in weight, volume, moisture content, and moisture absorption amount, which indicate the physical properties of Korean wheat meju using 20% polished wheat, 50% polished wheat, whole wheat, and whole wheat flour, most of the wheat materials reached the equilibrium state after 4 hours of soaking. Also, the appropriate steaming time to complete the cooking of the wheat materials was found to be 10 min at $100^{\circ}C$, except for whole wheat. The 20 and 50% polished wheat materials were selected for Korean wheat meju based on the soaking and steaming results. The selected wheat materials were fermented using Aspergillus oryzae and Bacillus subtilis M1, respectively, and the quality properties and enzyme activities showed that A. oryzae would be effective for the manufacture of Korean wheat meju. Also, the 50% polished wheat showed higher total sugar content, reducing sugar content, and ${\alpha}$-amylase activity than the 20% polished wheat. Therefore, it is supposed that the fermentation of 50% polished wheat by A. oryzae would be appropriate for manufacturing superior Korean wheat meju.

Risk Assessment of As, Cd, Cu and Pb in Different Rice Varieties Grown on the Contaminated Paddy Soil (중금속 오염 논토양에서 재배된 벼 품종간 위해성평가 비교)

  • Kim, Won-Il;Kim, Jin-Kyoung;Yoo, Ji-Hyock;Paik, Min-Kyoung;Park, Sang-Won;Kwon, Oh-Kyung;Hong, Moo-Ki;Yang, Jay-E;Kim, Jeong-Gyu
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.42 no.1
    • /
    • pp.53-57
    • /
    • 2009
  • Heavy metal pollution may be one of the most serious challenges confront crop production and human health. Therefore, the selection of heavy metal tolerance cultivars which adapted to the contaminated fields will introduced a suitable solution for management this critical environmental risk. The objectives of this research is to assess human health risk using geochemical analyses and exposure assessment of heavy metals in rice cultivars. Risk for inhabitants in the closed mine area was comparatively assessed for As, Cd, Cu and Pb in 10 rice varieties as a major exposure pathway. The average daily dose (ADD) of each heavy metal was estimated by analyzing the exposure pathways to rice and soil. For the non-carcinogenic risk characterization, Hazard Quotient (HQ) and Hazard Index (HI) were calculated using toxicity indices provided by US-EPA IRIS. The different rice varieties revealed a wide range of HI values from 23.6 to 34.3, indicating that all rice varieties have a high potential toxic risk. The DA rice variety showed the lowest HI value while the TB rice variety the highest. The probabilities of cancer risk for As via rice consumption were varied with rice varieties ranging from 2.0E-03 to 3.5E-03 which exceeded the regulatory acceptable risk of 1 in 10,000 set by US-EPA. The DA rice variety also showed the lowest value while the TB rice variety gave the highest value. Our results indicate that risk assessment can be contribute to screen the pollution safe rice cultivars in paddy fields affected by the mining activity.

Influence of Academic Self-efficacy, Critical Thinking Disposition, and Learning Motivation on Problem Solving Ability in Nursing Students (간호대학생의 학업적 자기효능감, 비판적 사고성향, 학습동기가 문제해결능력에 미치는 영향)

  • Kim, Mi Young;Byun, Eun Kyung
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.20 no.1
    • /
    • pp.376-383
    • /
    • 2019
  • This study was conducted to investigate academic self-efficacy, critical thinking disposition, and learning motivation, which influence problem solving ability in nursing students. Data were collected from June 4, 2018 to June 29, 2018, and the final 213 data points were used for analysis. The SPSS/WIN 22.0 program was used to conduct descriptive statics, Pearson's correlation coefficient, t-tests, ANOVA, Scheffe's test and multiple regression analysis. The problem solving ability according to the general characteristics differed among residential type (F=3.930, p=0.021) and satisfaction with major (F=4.618, p=0.011). In the correlation between academic self-efficacy, critical thinking disposition, learning motivation, and problem solving ability of the subject, academic self-efficacy (r=0.573, p<0.001), critical thinking disposition (r=0.620, p<0.001), and learning motivation (r=0.563, p<0.001). The factors affecting the problem solving ability of the study subjects were major satisfaction (${\beta}=.117$, p=0.036), academic self-efficacy (${\beta}=0.314$, p<0.001), critical thinking disposition (${\beta}=0.318$, p<0.001), and learning motivation (${\beta}=0.217$, p=0.004), with an explanatory power of 45.2%. In this study, it is necessary to confirm the effects of the development of the intervention program and the application of the program, which can improve the problem solving ability of nursing students.

Natural Heritage Values and Diversity of Geoheritages on Udo Island, Jeju Province (제주도 우도 지역 내 지질유산의 다양성과 가치)

  • Woo, Kyung Sik;Yoon, Seok Hoon;Sohn, Young Kwan;Kim, Ryeon;Lee, Kwang Choon;Lim, Jong Deock
    • Korean Journal of Heritage: History & Science
    • /
    • v.46 no.1
    • /
    • pp.290-317
    • /
    • 2013
  • The objectives of this study are to investigate the natural heritage and scientific value of various geosites on Udo Island, and to evaluate the sites as natural monuments and as world natural heritage properties. Udo Island includes a variety of geoheritage sites. Various land forms formed during the formation of the Someori Oreum formed by phreatomagmatic eruptions. The essential elements for the formation of Udo Island are the tuff cone, overflowing lava and overlying redeposited tuff sediments. Various coastal land forms are also present. About 6,000 years B.C., when sea-level rose close to its present level due to deglaciation since the Last Glacial Maximum, carbonate sediments have been formed and deposited in shallow marine environment surrounding Udo Island. In particular, the very shallow broad shelf between Udo Island and Jeju Island, less than 20 m in water depth, has provided perfect conditions for the formation of rhodoids. Significant amounts of rhodoids are now forming in this area. Occasional transport of these rhodoids by typhoons has produced unique beach deposits which are entirely composed of rhodoids. Additional features are the Hagosudong Beach with its white carbonate sands, the Geommeole Beach with its black tuffaceous sands and Tolkani Beach with its basalt cobbles and boulders. Near Hagosudong Beach, wind-blown sands in the past produced carbonate sand dunes. On the northern part of the island, special carbonate sediments are present, due to their formation by composite processes such as beach-forming process and transportation by typhoons. The development of several sea caves is another feature of Udo Island, formed by waves and typhoon erosion within tuffaceous sedimentary rocks. In particular, one sea cave found at a depth of 10 m is very special because it indicates past sea-level fluctuations. Shell mounds in Udo Island may well represent the mixed heritage feature on this island. The most valuable geoheritage sites investigated around Udo Isalnd are rhodoid depostis on beaches and in shallow seas, and Someori Oreum composed of volcanoclastic deposits and basalt lava. Beach and shallow marine sediments, composed only of rhodoids, appear to be very rare in the world. Also, the natural heritage value of the Someori Oreum is outstanding, together with other phreatomagmatic tuff cones such as Suwolbong, Songaksan and Yongmeori. Consequently, the rhodoid deposits and the Someori Oreum are worth being nominated for UNESCO World Natural Heritage status. The designation of Someori Oreum as a Natural Monument should be a prerequisite for this procedure.