• Title/Summary/Keyword: BYT

Search Result 18, Processing Time 0.023 seconds

Application of Full-Face Round by Sequential Blasting Machine in Tunnel Excavation (터널굴착에서 다단식 발파기에 의한 전단면 발파의 적용성 연구)

  • 조영동;이상은;임한욱
    • Explosives and Blasting
    • /
    • v.13 no.1
    • /
    • pp.20-31
    • /
    • 1995
  • Many methods and techniques to reduce ground vibrations are well known. Some of them are to adopt electric milisecond detonators with a sequential blasting machine or an initiating system with an adequate number of delay intervals. The types of electric detonators munufactured in Korea include instantaneous, decisecond and milisecond delays byt numbers of delay intervals are only limite from No.1 to No.20 respectively. It is not sufficient to control accurately milisecond time with these detonators in tunnel excavation. Sequential fire time refers to adding an external time delay to a detonators norminal firing time to obtain sequential initiation and it is determined by sequential timer setting. To reduce the vibration level, sequential blasting machine with decisecond detonatore was adopted. A total of 134 blasting was recorded at various sites. Blast-to-structure distances ranged from 20.3 to 42.0 meter, where charge weight varied from 0.25 to 0.75 kg per delay. The results can be summarized as follow : 1. The effects of sequential blasting machine on the vibration level are discussed. The vibration level by S.B.M. are decreased approximately 14.38~18.05 to compare to level of conventional blasting and cycle time per round can be saved. 2. The empirical equations of particle velocity were obtained in S,B.M. and conventional blastin. $V=K(D/W^{1/3})-n$. where the values for n and k are estimated to be 1.665 to 1.710 and 93.59 to 137 respectively. 3. The growth of cracks due to vibrations are found but the level fall to within allowable value.

  • PDF

Life Table Construction Based on the Recent Vital Registration Data (최근 신고자료를 기초로 한 우리나라 사망패턴)

  • 김백현;최봉호;김동회
    • Korea journal of population studies
    • /
    • v.13 no.1
    • /
    • pp.3-25
    • /
    • 1990
  • Life table of Korean population for years 1983 1985 1987 and 1989 were constructed byt the National Bureau of Statics. The ago specific death rates were calculated froom the death registral ion for numerators and the estimated population by age and sex for denominators. In the course of constructing life tables, we have maole some adjustments for deficiencies in regist rat ion olata as follows. First, the non-registered portion oof infant deaths especially for neo-natal deaths was estirnateol and added too the original data. The main reason is that deaths occorring in the neo-natal period and prior to the registrat ion of birth leave little incentive for the registration of either the birth or the death. Second. t he do~hayed p(ortioon of deaths registering after one year of occurrence was estimated and added too the original data. Third t the ptortioon haying in, occuracies in ,~oge reporting was also estimated. Fourth the moving average methood was finally employed in an effort too remove the random error. The major fin(hings are as foolloows. 1. the average life expectancy at birth in 1989 is calculateol as 70.8 years in 1989, 2. a gap netween the male and female life expectancies is widened to more than 8 years toorm 1.8 years in 1906 10. It means that the female life expectancy has increased substantially, 3. the death rates of the middle - aged men starting age 40 are found to he relatively higher than those of females and younger age groups. This peculiar pattern was also found with the comparison of those of other countries.

  • PDF

The Characterization of Nano-Nickel Catalyst with High Activity by Mechanochemical (MC) Method I. Microstructure of MA Ni-50wt% Al and Preparation of Nano-Ni (기계.화학적 방법으로 제조된 고활성 나노-니켈 촉매의 특성 I. MA된 Ni-50wt% Al 합금의 미세구조 및 나노 촉매 제조)

  • Lee, Chang-Rae;Choe, Jae-Ung;Gang, Seong-Gun
    • Korean Journal of Materials Research
    • /
    • v.9 no.6
    • /
    • pp.615-621
    • /
    • 1999
  • The new process in order to fabricate of Ni catalyst with high activity by the mechanochemical(MC) method which was combined the mechanical alloying(MA) and the chemical treatment process. The microstructure and characterization of mechanically alloyed Ni-5-wt% Al powder and Ni catalyst gained by alkali leaching were investigated byt he various analysis such as XRD, SEM-EDS, HRTEM and laser particle analyzer. The steady state powder with 1~2$\mu\textrm{m}$ mean particle size was obtained after 30hr milling with the PCA of 2 wt% stearic acid under the condition of grinding stainless steel ball to powder ratio of 60:1 and rotating speed fo 300rpm. According to result of HRTEM diffraction pattern, MA powder of the steady state was nanocrystalline $Al_3$$Ni_2$ intermetallic compound. Ni catalyst was obtained after KOH leaching of the steady state powder was about 20nm nanocrystalline which contained about 8 wt % Al.

  • PDF

The Effect of Plasma on Hydrophilic Surface Modification of LDPE (저밀도 폴리에틸렌의 친수성 표면개질에 미치는 플라즈마의 영향)

  • Hwang, Seung-No;Jeon, Bup-Ju;Jung, Il-Hyun
    • Applied Chemistry for Engineering
    • /
    • v.9 no.3
    • /
    • pp.383-387
    • /
    • 1998
  • The effect of hydrophilic surface modification of low density polyethylene(LDPE) byt the plasma gas($O_2$, $N_2$, and $O_2/N_2$) was investigated from the point of view of the functionalities of the generated LDPE surfaces and the contact angle. By virtue of x-ray photoelectron spectra(XPS) and attenuated total reflectance(FT-IR ATR) analysis, the LDPE surfaces treated with plasma were generated with oxygen functionalities of carbonyl, carboxyl, and the like, nitrogen functionalities by nitrogen plasma and mixing of nitrogen and oxygen plasma treatment were identified with. It was found that nitrogen plasma treatment showed with minimum value at contact angle for rf-power and treatment time, we had obtained optimum condition for hydrophilic surface modification at composite parameter, [(W/FM)t] 520~550GJs/kg.

  • PDF

The Antiulcer Effects of Alove vera on the Stomach ulcer Induced by Stress in rats (흰쥐의 스트레스성 위궤양에 대한 Alove vera의 항궤양작용)

  • 박은지;이용욱
    • Journal of Food Hygiene and Safety
    • /
    • v.9 no.3
    • /
    • pp.175-184
    • /
    • 1994
  • This was performed to investigate the antiulcer effects of Aloe vera on the stomach ulcer induced by restraint and water-immersion stress in rats. For this experiment, 60 male Sprague-Dawley strain were used. The experimental groups were divided into five: a control(CA) and 4 aloe treatment groups. Each dose of aloe was 50 mg/kg BW(AA), 100mg/kg BW(AB), 200 mg/kg BW(AC), and 400 mg/kg BW(AD). The rats were allocated to each group by 12 and observed for 4 weeks. The results are as following. 1. The stomach surface pH in each group showed no significant difference, byt the values of aloe treatment groups were higher than the value of the control group. 2. The gastric wall mucus was significantly increased in all aloe treatment groups(p<0.05) compared with the control group. Especially in AC and AD group the differences were higher(p<0.01). 3. At shear rate rate 11.25, 45.0, 90.0, 225.0 sec-1, whole blood viscosity and plasma viscosity were measured. Most of the values of aloe treatment groups were significantly low compared with those of the control group(P<0.05). 4. The ulcer index of aloe treatment groups were significantly low campared with control group(p<0.05). Especially in AC and AD group the differences were more significant(p<0.01). 5. Less severe ulcers were observed in AA and AB group than in the control group. Tissues of AC and AD group had only slight ulcers and necrosis of tissue was not observed in these groups. Especially in AD group, there was more mucus than other groups and it seemed that alove vera stimulated the epithelial regeneration. From the results of this study, it can be concluded that the oral administration of Alove vera results in protection of stomach ulcer by stimulating the secretion of gastric mucus and the circulation of blood.

  • PDF

Selection of Constitutive Promoter for Exoinulinase Production in Fed-Batch Culture of Recombinant Yeast (재조합 효모의 유가배양에서 Exoinulinase생산을 위한 Promoter의 선별)

  • 김이경;고지현;김연희;김성구;남수완
    • Microbiology and Biotechnology Letters
    • /
    • v.29 no.4
    • /
    • pp.206-211
    • /
    • 2001
  • In order to overexpress constitutively the Kluyveromyces marxianus exoinulinase gene (INUI) in Saccharomyces cerevisiae, four episomal expression systems employing GAPDH, ADHI, PGK and ENOI promoters were constructed as p YIGP aADHI -INU, pPGK-INU, and pENOI- INU plasmids respectively, When S cereviais transformants harboring each plasmid were batchwisely cultivated in the fermentor containing 5% glucose medium no significant differences in the cell growth are observed How- ever the experession level of exoinulinase and plasmid stability showed a strong dependency on the promoter employed. The expression levels of exoinulinase were about 1.70 unit/ml for GAPDH promoter 1.67 unit/ml for PGK promoter, 1.29 unit /ml for ADH1 promoter, and 0.80 unit/ml for ENOl promoter. The plasmid stabilites were maintaines above 80% in all experession systems. except the GAPDH promoter system of 55%, Based on the plas- mid stability and expression level of exoinulinase the ADHl and PGK promoter system were selected for the fed - batch culture to overproduce exoinulinase By the intermittent feeding of yeast extract and glucose, both promoter systems gave the cell concentration of about 30 g-dry cell weight/1 byt the maximal exoinulinase activity of 3.70 unit/ml and plasmid stability of 96% in the ADH1 promoter were higher than those (2.70 unit/ml, 80%) of PGK sys- tem Taking into account the plasmid stability and extended culture time the ADH1 promoter systems would be the most feasible expression systems for the constitutive overproduction of exoinulinase through high cell-density fed- batch cultures using non-selective rich medium.

  • PDF

Effective Chrome Removal Process from Shaving Dust (피혁분의 효율적인 탈 크롬 방법에 관한 연구)

  • Yun, Sun-Gyu;Park, Sung-Ha;Lee, Sang-Seob;Na, Jung-Won;Ko, Myung-Han
    • Applied Chemistry for Engineering
    • /
    • v.10 no.8
    • /
    • pp.1104-1108
    • /
    • 1999
  • In this study it was focused that if the chrome could be removed in the shaving dust, the reusable protein resource could be recycled from the shaving dust. As the chrome forms a Cr-collagenate by cross linking of collagen in the shaving dust, the dust was steeped for swelling and plumping by $Ca(OH)_2$ solution and then chromium in dust was resolved out by $H_2SO_4$ solution in the first stage process. In the second stage one, dust was swelled and plumped by NaOH solution and then the chromium in dust was oxygenated to a hexavalent chrome, which has high solubility in $H_2O_2$ solution. And then the chromium was removed byt he steeping of $H_2SO_4$ solution as the last process. The first stage process was consisted of the sequential steeping of 3%-$Ca(OH)_2$ and $0.8%-H_2SO_4$. In the second stage the total chrome was effectively removed by the sequential steeping of 0.1%-NaOH, $3%-H_2O_2$ and $1%-H_2SO_4$. In the completely dechromated dust, the humidity was measured as 10.68% and the crude protein was contained by 79.81%. Steeping solutions were reused 3 times for chrome removal process, the chrome was entirely removed in shaving dust.

  • PDF

Ecological Studies on the Improvement of Natural Pasture by Fertilization and Grazing (시비 및 방목에 의한 자연초지의 개량에 대한 생태학적 연구)

  • ;G. Spatz
    • Journal of The Korean Society of Grassland and Forage Science
    • /
    • v.6 no.3
    • /
    • pp.138-144
    • /
    • 1986
  • This trial was carried out to find out the methods of improvement of natural pasture by PK-fertilization and sheep grazing. The experimental area covered with the community of Carex ferruginea-dominated and located at the Bavarian Alps in the southern part of Germany. As measuring the changes of the vegetation, the Releve-method, the Point-Intercept-method and the Quadrat-Charting-method were applied. Changes in the ecological evidence of the vegetation were studied during the period from April 1980 to the end of growing season in 1983. 1. The fodder value at the oversown pasture we slightly increased by PK-fertilization with sheep grazing, byt that gradually decreased by grazing without fertilization. 2. The pasture quality at the secondary vegetation was greatly improved as well as that of the oversown pasture in Autumn of the second experimental year by sheep grazing with PK-fertilization, but the fodder value was not like that by grazing without fertilization at the natural pasture. 3. The influence of phosphorus/ potassium-fertilization was much more serious than that of sheep grazing. Sedges almost disappeared due to fertilization, on the other hand grasses and legumes increased distinctly. Sheep grazing without fertilization led to a gradual decrease of legumes. The enormous biomass difference in sedges between the June and October analyses was due to a lack of regenerative capacity. 4. The plant community of Carex ferruginea-dominated before the experiment was successived into Alchemillo-Cynosuretum by PK-fertilization with sheep grazing.

  • PDF